Yarilightcav Posted August 21 Share Posted August 21 On 11/30/2024 at 1:49 AM, yslalan said: No, it won't work. You need to maintain the GPU's bit width—6 slots mean 192 bits. The only upgrade option is from 12GB to 24GB. However, as of now, I believe the Ada series hasn't been cracked to support such a large VRAM capacity in their vBIOS. The supported VRAM combinations are hard-coded in the vBIOS. Refer to the GPU-Z entry for confirmation. A request from those on this thread—can anyone dump a 7780 or 7680 RTX 3500 vBios that I could try flashing to my puny 5680? I am trying to increase the TGP and 5680 I believe runs with the bare minimum 60w while the 7680 and 7780 have 90 and 115 respectively. Link to comment Share on other sites More sharing options...
uzi Posted August 22 Share Posted August 22 On 8/20/2025 at 5:54 PM, Mambucho said: DDR - CAMM - DDR exchange was an attempt to run it by luck, I didn't want to think that I had lost money. I bought a SODIMM DDR5 -5600 XMP.3.0, and I found "4 white and 2 yellow flashes", I thought that this was the initialization of the memory, and I waited for a long time. Then I realized that this was a problem, and I installed CAMM again, and I did this several times, and miraculously, the power button did not turn off when the laptop was on, and I waited for about 4 minutes for the correct initialization. @Mambucho Forgot to mention additionally, both the RAM sticks work on the top slot nearest to the connector when tested individually but both of them don't work when I connected then to the bottom one. Did you try something like that ? Also may I ask what is the model number of your interposer or where you purchase it from ? Apparently there are 2 models LS-L88BP and LS-L88LP, mine is LS-L88LP Link to comment Share on other sites More sharing options...
uzi Posted August 22 Share Posted August 22 On 3/17/2025 at 9:42 PM, rintalahri said: I was also thinking of replacing the camm memories with sodimm memories. Does anyone know which model I should buy or what the differences are? LS-L88BP or LS-L88LP How big sodimms i can put in my precision 7680?? @rintalahri bought the LS-L88LP and only 1 slot of the interposer works, other one does not Link to comment Share on other sites More sharing options...
Mambucho Posted August 22 Share Posted August 22 1 hour ago, uzi said: @Mambucho Forgot to mention additionally, both the RAM sticks work on the top slot nearest to the connector when tested individually but both of them don't work when I connected then to the bottom one. Did you try something like that ? Also may I ask what is the model number of your interposer or where you purchase it from ? Apparently there are 2 models LS-L88BP and LS-L88LP, mine is LS-L88LP LS-L88LP. Aliexpress Dell Precision 7680, RTX 3500 ADA, CAMM 32 ГБ, FHD+, WIN 11 Pro for Workstations (25H2.Dev) Link to comment Share on other sites More sharing options...
uzi Posted August 22 Share Posted August 22 43 minutes ago, Mambucho said: LS-L88LP. Aliexpress @Mambucho same got the exact same one form aliexpress. Strange thing is both RAM stick work on Slot 1 and adjust to 5200Mhz but dont work on Slot 2 (4 white + 2 amber), so likely I assume the issue is with the interposer ? Link to comment Share on other sites More sharing options...
Mambucho Posted August 22 Share Posted August 22 51 minutes ago, uzi said: @Mambucho same got the exact same one form aliexpress. Strange thing is both RAM stick work on Slot 1 and adjust to 5200Mhz but dont work on Slot 2 (4 white + 2 amber), so likely I assume the issue is with the interposer ? 32x2 5200mt\s 128Gb 4800mt\s Dell Precision 7680, RTX 3500 ADA, CAMM 32 ГБ, FHD+, WIN 11 Pro for Workstations (25H2.Dev) Link to comment Share on other sites More sharing options...
uzi Posted September 2 Share Posted September 2 On 8/22/2025 at 9:21 PM, Mambucho said: 32x2 5200mt\s 128Gb 4800mt\s @Mambucho So I bought a second interposer module and same thing persists this time only the bottom slot works (Both RAM inserted individually and tested) whereas the top slot does not work. So confused Link to comment Share on other sites More sharing options...
uzi Posted Sunday at 06:40 PM Share Posted Sunday at 06:40 PM @Mambucho want to report back that I finally solved the issue on my 4th interposer, but I belive it was not the interposer but rather the technique I was using when installing the interposer. So what really did the trick was carefully screwing the interposer to the thin connector. Heres the exact step I followed for others who might be in the same situation: - screw the right side but dont screw in fully just until it fits lightly - screw the left side in fully (slightly more than the right side) - screw the right side in slightly more I can confirm that the above did the trick because when I attempted to screw both side tightly it threw the 4 white, 2 amber error and when I did the above step it started detecting the RAMs again. The key is to NOT TO TIGHTLY FIT the screws holding the interposer to the connector plate. Another thing I realized is that the right side of motherboard of the laptop (not the interposer) is sligthly elevated compared to the left which could be the reason that tightly fitting the screws in could lead to some misalignments between the interposer and connector plate. I state this because the same screw sized screw that was able to screw the left side of the interposer was not able to screw the right side for which I had to use a longer screw. Would be curious what others think about this, thanks for all the assistance ! 2 Link to comment Share on other sites More sharing options...
Mambucho Posted Monday at 08:46 PM Share Posted Monday at 08:46 PM On 9/7/2025 at 9:40 PM, uzi said: @Mambucho want to report back that I finally solved the issue on my 4th interposer, but I belive it was not the interposer but rather the technique I was using when installing the interposer. So what really did the trick was carefully screwing the interposer to the thin connector. Heres the exact step I followed for others who might be in the same situation: - screw the right side but dont screw in fully just until it fits lightly - screw the left side in fully (slightly more than the right side) - screw the right side in slightly more I can confirm that the above did the trick because when I attempted to screw both side tightly it threw the 4 white, 2 amber error and when I did the above step it started detecting the RAMs again. The key is to NOT TO TIGHTLY FIT the screws holding the interposer to the connector plate. Another thing I realized is that the right side of motherboard of the laptop (not the interposer) is sligthly elevated compared to the left which could be the reason that tightly fitting the screws in could lead to some misalignments between the interposer and connector plate. I state this because the same screw sized screw that was able to screw the left side of the interposer was not able to screw the right side for which I had to use a longer screw. Would be curious what others think about this, thanks for all the assistance ! This is exactly what I wrote to you about, so that you could screw the SoDIMM bar in this way, my RAM started working after I did the same Dell Precision 7680, RTX 3500 ADA, CAMM 32 ГБ, FHD+, WIN 11 Pro for Workstations (25H2.Dev) Link to comment Share on other sites More sharing options...
uzi Posted Monday at 11:42 PM Share Posted Monday at 11:42 PM 3 hours ago, Mambucho said: This is exactly what I wrote to you about, so that you could screw the SoDIMM bar in this way, my RAM started working after I did the same @Mambucho Yes precisely, thanks a lot man !! Do you think 96gb (48gbx2) crucial ram will work ? 😅 Link to comment Share on other sites More sharing options...
uzi Posted Monday at 11:54 PM Share Posted Monday at 11:54 PM Anyone here managed to upgrade their Dell Precision 7680 to 96gb (48gb x 2) SODIMM ? Can it be done ? Link to comment Share on other sites More sharing options...
iieeann Posted yesterday at 04:22 AM Share Posted yesterday at 04:22 AM I have been using it in 7780 for many months without problem. it will run at 5200Mhz. 7680 should be similar ...? Dell Precision 7780. 13950HX, 96GB, RTX 5000 Precison 7720, M6800, XPS 9310, Latitude 5310, etc. Link to comment Share on other sites More sharing options...
uzi Posted yesterday at 07:37 AM Share Posted yesterday at 07:37 AM 3 hours ago, iieeann said: I have been using it in 7780 for many months without problem. it will run at 5200Mhz. 7680 should be similar ...? @iieeann have heard of multiple cases for 7780 but only saw one for 7680. For 7780 is it also mentioned in the docs that it can support maximum 64gb sodimm as it is for 7680 ? Link to comment Share on other sites More sharing options...
Mambucho Posted yesterday at 10:46 AM Share Posted yesterday at 10:46 AM 11 hours ago, uzi said: @Mambucho Yes precisely, thanks a lot man !! Do you think 96gb (48gbx2) crucial ram will work ? 😅 yes of course Dell Precision 7680, RTX 3500 ADA, CAMM 32 ГБ, FHD+, WIN 11 Pro for Workstations (25H2.Dev) Link to comment Share on other sites More sharing options...
iieeann Posted 21 hours ago Share Posted 21 hours ago 8 hours ago, uzi said: @iieeann have heard of multiple cases for 7780 but only saw one for 7680. For 7780 is it also mentioned in the docs that it can support maximum 64gb sodimm as it is for 7680 ? That is because of 32gb was the largest stick available at that time, and dell had no way to try 48gb stick before the launching. Dell Precision 7780. 13950HX, 96GB, RTX 5000 Precison 7720, M6800, XPS 9310, Latitude 5310, etc. Link to comment Share on other sites More sharing options...
Mambucho Posted 11 hours ago Share Posted 11 hours ago 9 hours ago, iieeann said: That is because of 32gb was the largest stick available at that time, and dell had no way to try 48gb stick before the launching. it exists on planet earth Dell Precision 7680, RTX 3500 ADA, CAMM 32 ГБ, FHD+, WIN 11 Pro for Workstations (25H2.Dev) Link to comment Share on other sites More sharing options...
uzi Posted 9 hours ago Share Posted 9 hours ago 1 hour ago, Mambucho said: it exists on planet earth im abit skeptical about if 128gb works, I bought the 96gb kit, what do you think reference: Link to comment Share on other sites More sharing options...
Mambucho Posted 8 hours ago Share Posted 8 hours ago 1 hour ago, uzi said: im abit skeptical about if 128gb works, I bought the 96gb kit, what do you think reference: this is for models 7530 7730 7740 7540 with XEON 32Gb*4, for other models from this series only 16*4 or 32*2 maximum Dell Precision 7680, RTX 3500 ADA, CAMM 32 ГБ, FHD+, WIN 11 Pro for Workstations (25H2.Dev) Link to comment Share on other sites More sharing options...
uzi Posted 7 hours ago Share Posted 7 hours ago 1 hour ago, Mambucho said: this is for models 7530 7730 7740 7540 with XEON 32Gb*4, for other models from this series only 16*4 or 32*2 maximum @Mambucho how confident are you that it will be able to support 128gb 😄 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now