Improve cooling x170kmg

[a-bracci00]

Qualcuno ha migliorato in qualche modo il raffreddamento di questo PC? Esistono ventole aftermarket migliori? Quelle che forniscono più pressione (più alette) e magari sono più silenziose?

[Teo]

Hi

 

there is already a FORUM specially for that laptop, it has all the necessary Answers and Question you are looking for. 
 

I can give you some advice.

 

1- Proper thermal Pad size and well clean polished heatsink. (You can use PTM7950 for GPU and CPU only, very efficient) 

 

2- Use a copper shim of 0.5mm under the GPU die, it has a kind of a small gap that thermal paste cannot properly cover. Use thermal paste on both side to the copper shim Or PTM7950 thermal pad. 

3- BUY a Water-cooler or make your own (eBay or Aliexpress) for overclocking is necessary. 

4- last, you can delid your CPU with better Copper die or use the same DIE change the internal thermalpaste from factory, Intel thermal paste is not that good, use Liquid Metal from thermal grizzly. (WARNING: Very dangerous to do, can break your CPU) 

 

For more question please follow the official Forum. 
 

 

[a-bracci00]

Thanks, so no fans, or they wouldn't be needed anyway. I'd already read the forum, but thanks anyway. Unfortunately, since I don't know anyone who delid processors, I think I'll just use PTM or Helios pads. That heatsink is interesting, if only it didn't cost as much as a PC. The 0.5mm pads are interesting, maybe I can evaluate them, but I think I'll need to apply a layer of thermal paste to dissipate well. Thanks.