Yumi

The unlocker from the googledrive link worked just fine on 1.07.04. No error messages and I now have a metric ton of new menu options in the BIOS 😁

Thanks. Might give it a try. Anyway, happy days. Moving the upper bottom RAM stick into the keyboard right-hand slot and leaving the other in the lower bottom slot prodded the BIOS into reading them both and now the full 64GB at 2933MHz shows up in the BIOS and Windows. After that, I could move the RAM stick from the keyboard slot back to the original bottom slot and it works fine. As an aside, it was worth lifting up the keyboard to fish out the dust bunnies living under it O_0

Thanks. I'll try using one / both of the under keyboard slots and see if that jolts it into discovering the new sticks. BTW, is there an unlocked version of 1.07.04? I've seen reference to an unlocked 1.07.02 in other posts.

I've got a X170SM with stock FW v1.07.04 and it won't recognise two new RAM sticks? It had 2x 16GB Corair sticks in it and now I bought 2x Corair 2933MHz sticks but they only show up as 2x 16GB in the BIOS and Windows. Tried the fn+D+Power thing. Tried going in the BIOS and "load defaults" Tried pulling the CMOS battery for 15 mins. This caused a CMOS battery message and a bunch of reboots but it detected them as 2x 16GB again. They show up correctly as 2x 32GB in HWinfo though with all the product IDs and the speed info present. Just can't get the BIOS to see or report them correctly though. They are installed in the two base slots by the CPU, same as the ones I took out.