cookieoreo18

thanks

you know where i can find the unlocked bios? I found a post about the Alienware 17 R1 Ranger. Is the Ranger a different model? Mine is just Alienware 17 R1

might as well go to a 1070 if im going to change the GPU. Will try to replace all mosfets and reball the core on the 980m anyways and see how it goes

alright great thanks

Recently the laptop started completely freezing or just shutting down when playing 7 days to die or running 3DMark time spy. Most of the time it wouldn't crash immediately. The game would suddenly start running at 2 fps while the sound is stuttering and then after 2 seconds the computer would COMPLETELY freeze or it would shut down by itself. In 3D mark it would crash halfway through most of the time, almost never at the start. In 7 days to die it could take over an hour. Now sometimes the driver could manage to recover and the laptop wouldn't crash, but only the game would crash. In the event viewer i would get this error about nvlddmkm: The description for Event ID 14 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: \Device\Video7 CMDre 00000002 00000ffc ffffffff 00000007 00ffffff After getting this error, the GPU would sometimes disappear from the device manager and i would have to restart the laptop multiple times or go into the bios and load the default settings. The reason i said in the title that it crashes even under medium load is because sometimes in 7 days to die where i was CPU bound, the GPU would be at 70% and still crash. I never encountered this issue in DIRT 3. I haven't played any other games to check. The maximum temperature i reached was 81 Celsius so the temps are not the issue. Im also getting a DCOM error related to game bar in the event viewer. I dont know if it has something to do with this. Here is what i tried to fix this issue but none worked: Tried older GPU drivers. Tried the versions 388 (stock windows driver), 462, 511, 551, 555, 556 (I had to modify them with NVClean because my laptop never came with this GPU and thus i have to mod the drivers to support it) I did a 130Mhz underclock on the core and 500Mhz on the memory. Gave to my user full permissions for the file nvlddmkm.sys in C:\Windows\System32 Created a DWORD (32BIT) in the registry named TdrDelay and set the decimal value to 10 Flashed the VBIOS with one for a clevo 980M. The clevo bios is known to work because many others have used it for this upgrade on this laptop. Did a fresh windows installation and installed only the GPU drivers and 3DMark. Ran memtest86 and the ram was totally fine. Removed the GPU and cleaned the MXM contacts with alcohol. Modified the GPU VBIOS to undervolt/underclock it at -200Mhz -100mV core core, -500Mhz memory and get it as cool as possible. It still crashed at only 66C Celsius. Noticed that the card is somewhat bent in one side. The guy who did the upgrade did not properly trim the backplate and one side of it was covering one of the screw holes. So in one side the card was screwed in, but in the other the backplate was hitting the screw hole on the motherboard thus pushing the GPU upwards. I am guessing this caused the GPU to get bent over time and some balls under the core may be slightly broken. So i reflowed the core, which did nothing. Maybe needs a reball? So i guess the card is dying. Is this a common issue with these cards? Is it the silicone of the core dying or could something like the vcore mosfets be dying?

I read somewhere that 10 series cards and above don't work with optimus. So if they do actually work thats good. I don't mind the 60Hz TN display. Do i need to flash a custom bios on the laptop or is it plug and play?

So i have an Alienware 17 R1 with a GTX 980M and 240W PSU. The GPU recently started crashing the entire computer during gaming and sometimes it wouldn't totally crash but give me Nvlddmkm error and after a restart disappear from the device manager and then require some restarts to get it back to show. So now im looking to upgrade to a better card. I have the 60Hz display. Is it possible to upgrade to a 1070, a P4000 or any other better card without having to go with the 120Hz display?