Nrml Man

I bought 7730 with 8750h cpu and quadro p4200 8gb.Does anyone know this quadro can work in dedicated mode (without intel) ? I replace 32gb ram and ssd of my previous 7530 to this,a total perfomance is better.And i like 7730's temperatures,it works much quieter.The overall impression - why i ddn't buy it before 😀👍

Now i can buy 7730 in very good condition with the same cpu (8750h),16gb RAM, 256gb ssd and Quadro p4200 8gb for a 420$.On my are 32 RAM. 512 ssd, Quadro p3200.Whether to buy it?As a variant i can to change places ram and ssd,and i think will sell my for a 360-370$

I perhaps will stay with Precision.Dell is already habitual for me.In future i want to try Kryosheet on cpu PS.I did disassembly my book and removed a bit of putty (for necessary 0.5-1 mm thikness).It became better.

Thanks for answer.How hot did your 8850h work without undervolt and other operations?I mean who's cooling is better,Zbook or Precision (comparable models) ?

In a peak,average is 70-75.And now i see not a throttling.

Are lower HP's scores equal to lower working temperatures?I saw that review,thanks.It's strange now i'm watching maximum 88-90 degrees and average 70-75 in my games (Stalker Gamma is enough heavy for harware,and Chivalry 2 is very CPU depending) without throttling,at idle 40-42,at Chrome is under 50-55 (Youtube,some tabs watching).Maybe is symply curved microsoft update was a cause of all these problems.Do i need reset Bios to default (just in case) ? Maybe any bug/error was here? I'm using this legs third time (my previous 7530,7510 and current 7530,all works and holds perfect,an altitude is enough,more than 1".Notebook breathes free.I bought its on Alyexpress for 1-1.5 USD.About putty - i bought Honeywell HT10000,it is of average softness.But maybe i'll disassembly notebook and see.If you say about 0.5mm so i'll see a print.

And what do you think or know about HP Workstations,a cpecifically Zbooks Fury 15/17 g6/g7 ? Are they better or worst by performance and temperatures than Precisions?

Thanks for answer.Yes,it is.I did change turbo-boost plan from default agressive to efficient agressive.Termal putty sells in needles so i make 2 sausages and it's total volume is not big on smd and vrm.Seems to be all these can reduce total heating as it was earlier.I put my notebook on these legs so it breathes good.

I don't understand,my 7530 did work well all the time.But after the last windows (w10) update did installed old nvidia driver and some system troubles begin.And overheating (with throttling) begin also.I reinstalled windows but overheating was left.I did update ptm with thermal pads (putty).It seems that all works good.But what is strange - previous service with cleaning and new therm.interface was 1 month ago.Any viruses,the system is clean of all bloatware and telemetry,a bios is last.I'm always in all working loads watching cpu's temp and i'm sick of this.I want service once and not watch "under the hood" during 1-2 years (what i can with my old 7510).Now i'm thinking to change my 7530 to 7730(40) or what do you think/know about Hp Workstations - a specifically Zbook Fury 15/17 g6/g7. PS. What is this part on photo?Classic pad was there and i changed it to putty also (ht10000)

Hello guys.Do you know,is a 7730(40)'s cooling system better than 7530?Or i will see also 85+ degrees on cpu (on working load) ?

Oh,great thanks!

Guys, can i change my 60Hz (1080p) screen to another faster (120,144,165Hz) on my 7530?Maybe from other Dell's model.Now I have installed a Quadro p3200 with nv-192 radiator, perfomance is very well,using ptm7950 on cpu and gpu cristalls,and Honeywell HT10000 thermal putty (10Wk*m) on vrm.Now I play games with v-sync On (in game setting, global in nvcp works worse), without fps limiter, low latency mode is ON (Ultra does not work smoothly, with micro stutter). So the input delay is not huge, my games can be played in full but I'll want to minimize the delay as much as possible.

I received a heatsink for p3200/rtx3000 from Aliexpress.But it came a little curved,and connection holes on gpu not matched by installing.So bad but its not the end of the world,i leave this idea,but at least i changed my Gelid HeatPhase for a fresh Ptm7950 on cpu.I see a little difference in temperatures already,Ptm is noticeably better.Thank you guys for answers and advices,have a nice day!

Thank you guys for answers.I think i need not to bother about other cpu,my 8750 is fully enough for today.Only i'll change gpu.Do you know a difference between delta and sunon fans,what are better?

Oh,so good.On my previous 7530 with 8850h cpu's a peak temperature was higher than on my today's and had a little throttle.So i made an undervolt.Now i'm using cpu at full speed (or about) without undervolt and any limit of max.frequency or tdp.My p3200's heatsink maybe delivered coming soon,i want to try a Cryosheet on cpu.So i hope to play Stalker 2)) at least on minimal settings)) Have another questions - do you know need i change 180w power adapter to 240w?And second question about Xeons,are they colder than i7 ?