TrooperN

Would it be possible to flash the bios with one from a M5000M? Edit: Flashed with a gtx 980m and m5000m bios and still no luck. Also I believe the p150hm does not have a iGPU...

So, I did some more experimenting, I had ordered a Quadro FX2800m as a cheap card to verify that my laptops mxm was working. That card was also an HPE blade card (important). I originaly thought that card was also a dead card with no display output. I then ordered another FX2800m that was working with the display, so I dumped the bios from that card and flashed it onto the HPE card and I now have two working cards. What I think is happening is that HPE cards have a special bios that has display outputs disabled. Now to find a non-HPE Tesla M6 bios...

I believe so, they never said exactly what bios/ec revision they were using, but I have updated mine to the latest and am assuming they did also.

Other people were able to get this card working in theirs, here is the thread on the Wayback Machine: Has anyone tried the Tesla M6 MXM - Page 6

Hello! Hopefully this is the right place for this so here goes. I am trying to get a Nvidia tesla m6 working in at least one of my laptops. I have tested it in both a p150hm and a p570wm, it is not working in either. It is currently installed in the secong gpu slot in the p570wm and is detected by device manager. However when I attempt to install a driver (m5000m modified with nvcleaninstall to work with the m6) with the add hardware and id of 13f3, I get code 43. I have tried using two different vbios from the techpowerup archive, neither of them have worked either. There is still no output, I have read on notebookreview that someone got a m6 working in a p150hm. The card is a HPE card. I am starting to wonder if the card is defective or if an hpe card will not work or if something else is going on. If anyone knows what I could do to get it working or determine if the card is broken, any help would be greatly appreciated!

Looks like they had both the primary and secondary, I placed an order for the primary and it's on the way! I am still interested in buying another one for the second GPU though.

I sent Eurocom sales an email to see if they have any in stock. Hopefully they have one 🙂

Im excited to get it running again just can't find a heatsink for it. I checked ebay and the only one was with a gtx 1060m upgrade kit for $700, I also looked on craigslist, offerup, even aliexpress and didn't find any either. Looks like this might be more difficult than I was expecting...

Hello, Im looking for a GPU heatsink for my P570 to get it up and running. Since the only place I can find them is Eurocom and I doubt they still have any.

Hello! I just got a Clevo P570 and am looking for a copy of either a eurocom unlocked bios or a prema bios for it, I am assuming that the eurocom unlocked one should work on any other distributer (Sager, XMG, etc.). If anyone has or knows where a copy can be found and would be willing to share, that would be greatly appreciated!