MyPC8MyBrain

@Mr. Fox I couldn't agree more, I hate that millennials MS execs think that a personal computer should behave like a smartphone. I have to spend so much time on a brand new system just to get it working right. my prospective is not how much time I spend to get it to work rather afterwards when it is setup to my liking. and the fact that undoing the nonsense MS is doing is possible in win11 while retaining latest technology and compatibility.
 

personally i don't get the point in deleding then slapping IHS back on instead of direct die application.

13 hours ago, Mr. Fox said:

Apply one tiny drop under each IHS wing

in the past i used this Permatex 22072 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, small drop in each corner same as Mr. Fox advice. https://www.amazon.com/gp/product/B000HBIBOY

all laptop these days use direct die for additional 20c savings over having an IHS, the main reason people placed the IHS back on is to compensate for the height, today there are plates specifically for that, click the video below to see a bench with one of these applied to a recent desktop 13900 cpu.

looks like there's only performance chassis for the 7x80 line.

the 7870 layout looks the same as the 7770, i bet one could swap the board and components.
they kept the same exact thermal design and a 240w power supply. 

30 minutes ago, Aaron44126 said:

First, it has to fit.

i think you have the wrong image for the 7670, dGpu footprint seems similar, its also the same dGpu and footprint in the 7770.

did you ever do a clean install or you running base OEM image?

if you are with OEM image your problem could be rooted there.

43 minutes ago, Aaron44126 said:

you really don’t like that stub

I have nothing against your stub solution, as you said its just HDMI sound driver.
I cant recall what brought up the stub solution, I just remember something was acting up for you prior.
 

the point i was trying to make is its clear that something is slowly creeping up on you there.
i was just trying to draw your attention to possibly a pattern you maybe overlooked that could have started way back.

i think you're chasing chasing the wrong lead.
if the SD card itself was bad you'd get read or write errors not PCIE errors.

it seems to me that everything started after you created a stub for NVidia device.
something happened that made you do that first, then two weeks later you notice the system is over heating.
and now this PCIE issue.

 

1 hour ago, Aaron44126 said:

When I took the cooler off to repaste it

The way I do repasting is similar to what you described up until the cleaning portion.

From there, I use electrical tape all around the CPU and dGPU silicon die as close as I can. I then create a flat layer of paste that covers the entire die evenly. After that, I remove the tape, which leaves a perfect flat two-millimeter layer of paste perfectly on the die.

The next step is critical, which is mounting back. Do not just tighten it down based on number order. Place the entire mount gently in its place, using its screws as guides. I like to go over each screw and turn it counterclockwise until I hear it pop on top of its screw slot. I do that for all screws to ensure that they all start in the same position. Then, go by the numbers, tightening them back, but only do a 1/4 turn at a time, going around until they are all tight. This ensures that the plates are not deflecting the paste to one side or the other as it's being seated back.

17 minutes ago, kojack said:

Linus toravids and LTT are the same guy

Linus Torvalds (Father of Linux OS) and  Linus Sebastian (LTT) are not the same person.

Linus Benedict Torvalds - https://en.wikipedia.org/wiki/Linus_Torvalds

Linus Gabriel Sebastian - https://en.wikipedia.org/wiki/Linus_Sebastian

14 hours ago, Steerpike said:

Surely this would be configurable?

it is, if the system is acting up with sleep power options simply uninstall and reinstall display driver.

4 hours ago, Mr. Fox said:

I get the air out by connecting

i wasn't referring to the pumps, the lines into the rad are sucking air back into the loop because the in/outlet are sucking from the top (if I'm not mistaken) instead of the bottom, air bubbles will trap and expand at the highest point which is where your inlet/outlets are, if you flip the rad upside-down so inlet and outlet are at the bottom, air will still tarp at the top but you will be circulating from the bottom without air, 

22 hours ago, Mr. Fox said:

 

this and few other pics you posted of your system are making my OCD acting up.
you should raise your external res at least above the highest line point inside the case.
you have huge air pockets you will not be able to get rid of, which interns reducing your cooling efficiency significantly.

your external rad from the limited views i was able to catch is also setup incorrectly, your inlet outlets should be at the bottom not the top (it would be wise to flip it upside down).

i find it hard to accept that in one month span paste could lose so much of its efficiency.

maybe the fan/paste is not the smoking gun after all.
did you somehow enabled hybrid mode by mistake?

when you said you dual boot and see the same behavior in another OS that pretty much narrows it down to either misplaced bios setting or some odd hardware issue that might been creeping in slowly. 

maybe its my age but i do not hear my fans working at all when on cool, i can never tell unless im in a heavy load situation. or maybe its just the acoustic differences in our environments, I'm in fairly wide open area with no clutter around.

i also think all the curve in the plans (accept maybe ultra) are outdated and not really suitable for the newer gen cpu's. indeed cool also caps dGpu, i run a script to switch modes.

30 minutes ago, Aaron44126 said:

Reasonably confident that it's not a software issue.

interesting, i have to put it out there... the behavior you've been describing is similar to what i saw when i tried bios 1.9.1.

to be fair you already reduced rpm's with first repaste, i run on cool for daily use which infers increased fan work.

quite plan logic is to tolerate more surface heat in favor of reduced fan usage, balanced should be a mix of the two but not cooler than cool plan, some surface heat should be expected to some extent when not on cool.

here's my surface temps.

technically speaking the heat pipe itself can leak leading to inefficiency in cooling,
when that happens temps should be spiking much higher with system losing ability to control heat, which still seem to be in control atm.

you have older system snapshots right?
i would take a new one then revert to older one to see if this is a software or hardware issue before you start looking for a needle in a haystack.

(if you have a thermal camera available you can also take a look at the pipes themselves to see if there's a leak)

13 minutes ago, Aaron44126 said:

I should be getting a new heatsink and not one that has been sitting around

good point!

note that my dGpu temps due to the heat pipe design are always higher then my cpu around 10c delta.

12 minutes ago, Aaron44126 said:

Are you still using the factory/stock paste job since you got the "golden sample" or did you redo it?

still with OEM paste job, haven't touched it yet.

at least you hit the nail on the head as far as looking for the culprit. 

when the new one arrives their paste will be different, you will want to put loads on both dGpu and CPU to let their paste settle in as part of the process. i believe it is designed to be "stiff" phase changing material to help with chassis rigidity. 

Edit: i just checked I'm averaging around 900rpm on cool profile
(with a good amount of 90+ none system processes running) .

once you lift the heat sync the pads should be replaced too.
although they can be reused, fit and contact will not be the same as fresh pressed pads.

 

I didn't read every rant on this thread, I'm on the other side of the scale.

from XP I skipped vista, and windows 7, to windows 8.1.

from 8.1 I skipped 10 and adopted 11 as good enough to replace win8.1 simplicity with latest bells and whistle's.

when I say good enough I mean make it runs, feel, look, and behave the same as my old 8.1.

I never got on the bandwagon of the store based apps.
I am old school full programs for me, either standalone or installer is what I will use, never apps!
its also important which programs you install onto your system.
 

another key for me is I never use retail version of windows I always use Enterprise version.

Enterprise has less often and more scrutinized and stable updates then retail does, 

this gives me all the controls I need most home users don't have nor care for.

stripping the system to its bare minimum is must, I then build from there.

with normal applications and drivers never use apps.

after full treatment for me Win11 is clean snappy and works perfect.

i have both classic interface and new style whichever I chose to utilize (I prefer classic)

i have the classic task bar behavior restored, i unlocked my task bar so you can notice i have the classic quick launch working as well as gadgets (none of the sticky tab nonsense ty).
 

i even have old trusty Task manager in place of the new one (i don't like the new task manager)

in conclusion Win11 is the most feature advanced and malleable than any MS OS provided the end user thus far.

1 hour ago, ryan said:

finally managed to get over 900mbps at around 1450mbps with my internet

that's nice for Wi-Fi devices and LAN file transfer,
beyond that its not practical for any real world applications,
no hosting provider out there will entertain 10% of that consistently, 

1 hour ago, ryan said:

about that now to keep it like this

that's easy, stop messing around and don't install more junk in your system.

deepfreeze your brain and your typing fingers instead 😄 

i think its plausible if the system moves around that chassis flex has some part in this,

you still on bios 1.8.0?