Kyser777 Posted October 13 Share Posted October 13 I just flashed my p775 RTX 2080 with a 200w mob vbios, https://drive.google.com/file/d/10bU9egVEpbdLLAHE-DBZo0fdOnN8DQjN/view after the reboot , the laptop seems to work but I got a black screenš¬. what is the solution to reflash with original vbios or workaround to this issue given that I have no display on the lcd panel and hdmi port? Ā if I need to reflash externally the mxm RTX 2080, what programmer should I buy thanks for your advice Link to comment Share on other sites More sharing options...
rainer124 Posted October 19 Share Posted October 19 hi Normaly work the clevo rtx 2080 with a Alienware 200 watt bios but not all HDMI and DP works, one Dp port is working but internal Display it works. But is the Vbios manipulated !? then you become a Blank screen !! Flash a Alienware vbios from alieneware mxm card an it works. The RTX series Card has a Software Protection ! the name isĀ Falcon security ! when eddit bios you became a blank screen.. Ā also flash a stock bios version.... Link to comment Share on other sites More sharing options...
Kyser777 Posted October 20 Author Share Posted October 20 On 10/19/2024 at 9:19 AM, rainer124 said: hi Normaly work the clevo rtx 2080 with a Alienware 200 watt bios but not all HDMI and DP works, one Dp port is working but internal Display it works. But is the Vbios manipulated !? then you become a Blank screen !! Flash a Alienware vbios from alieneware mxm card an it works. The RTX series Card has a Software Protection ! the name isĀ Falcon security ! when eddit bios you became a blank screen.. Ā also flash a stock bios version.... according to a forum member , my RTX mxm card is not g-sync type and therefore was incompatible with the alienware vbios making a black screen on the internal display. does theĀ Falcon security allow me to flash back againĀ the original vbios? do I need a 1.8v programmer ? any guide to flash with a programmer the RTX bios? thanks Link to comment Share on other sites More sharing options...
Kyser777 Posted October 20 Author Share Posted October 20 FIXED!!!! first remove all power source including the battery of the laptop. use the CH341AĀ programmer with 1.8v adapter (check the picture). use the soft #neoprogrammer#Ā to flash the vbios and set the IC to the Vbios type model. clip the bios correctly and make connection. I flashed with the backup vbios and the screen light up again perfectly Ā always backup your original bios, vbios before to flash in case of problem.Ā I am just sad I can not mod to 200w..... Ā hope this topic helps others Link to comment Share on other sites More sharing options...
srs2236 Posted October 20 Share Posted October 20 @Kyser777Ā I think you can convert your 2080 in to a g-sync one by changing some kind of strap resistor on the board. I think there was a tutorial for this somewhere on the internet. Clevo P775TM1-G: Spoiler GPU: NVIDIA GeForce RTX 3080 Laptop 16GB (150W, +110MHz Core, +350MHz Mem) CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -130mV, 255A, 200W PL1/2) RAM: DDR4 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v) Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0) Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3) Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E) Display: AU Optronics B173ZAN0.10 (4K, 60Hz) Wi-Fi/BT: Killer(R) Wireless-AC 1550 (9260NGW, PCI-E) Operating system: Windows 11 Pro x64 (23H2) Link to comment Share on other sites More sharing options...
Kyser777 Posted October 20 Author Share Posted October 20 is there a way to apply a 200w modification to a non-g-sync card vbios? there is no logic reason that it cannot be done... my water-cooling system is waiting for this 200w card! if someone have a 200w vbios for rtx 3080 as well, I will be happy too. Link to comment Share on other sites More sharing options...
srs2236 Posted October 20 Share Posted October 20 5 hours ago, Kyser777 said: is there a way to apply a 200w modification to a non-g-sync card vbios? there is no logic reason that it cannot be done... my water-cooling system is waiting for this 200w card! if someone have a 200w vbios for rtx 3080 as well, I will be happy too. Like I said I think there is but you first have to convert your 2080 to g-sync. I think this is done by changing a strap resistor somewhere on the board and then flashing the g-sync BIOS or in your case the 200W BIOS. Check info here: Ā 200W VBIOS for RTX 3080 does not exist unfortunately. Clevo P775TM1-G: Spoiler GPU: NVIDIA GeForce RTX 3080 Laptop 16GB (150W, +110MHz Core, +350MHz Mem) CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -130mV, 255A, 200W PL1/2) RAM: DDR4 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v) Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0) Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3) Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E) Display: AU Optronics B173ZAN0.10 (4K, 60Hz) Wi-Fi/BT: Killer(R) Wireless-AC 1550 (9260NGW, PCI-E) Operating system: Windows 11 Pro x64 (23H2) Link to comment Share on other sites More sharing options...
Kyser777 Posted October 20 Author Share Posted October 20 5 hours ago, srs2236 said: Like I said I think there is but you first have to convert your 2080 to g-sync. I think this is done by changing a strap resistor somewhere on the board and then flashing the g-sync BIOS or in your case the 200W BIOS. Check info here: Ā 200W VBIOS for RTX 3080 does not exist unfortunately. Ā thanks for your info! what can we do nowadays to boost RTX 3080 performance apart from making conventional overclocking? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now