Pimp my Rid... ehh M6800

[Annihilator]

hey peeps, got an M6800 for 100 bucks n now just want upgrade... some stuff already clear n ordered / installed, but need to know a couple of things(mainly about GPU options).

 

Service Tag is: 9F9PZ52 (so u guys can take a look of original config)

 

Original Configuration --> planed - ordered - already done/delivered:

 

i7-4710MQ --> i7-4930MX(@4.1GHz allcore)

2x 4GB DDR3L 1600 --> 4x 4GB Kingston DDR3L 2133 CL11

AMD FirePro M6100 --> NV GTX 880M 8GB(just waiting for the NV heatsink, 880M i already had bcs was planned for a imac upgrade) doesnt work, maybe corrupted Bios, Quadro P5200

2x SATA 500GB HDD --> 2x 250GB Samsung 850 Evo SATA Raid0 + Kioxa BG5 1TB mPCIe

No WIFI --> WIFI 6/AX

sticky Palmrest --> New Palmrest

Low Performance GPU Heatsink --> Optimizing Heatsink: lil Copper Heatsinks, second Fan

Windows 10 Pro --> Windows 11 Pro

 

[Annihilator]

just measured some things... i can solder some passive heatsinks on the GPU n CPU cooler plate, height between 2-5mm, n in the secondary HDD bay will fit a 70*15mm blower fan, good on this is, no mods on the cassis itself needed, just couple hole on the bottom cover for the fan to get fresh intake n done, another really great thing is, bcs the bay is open straight to the direction of the cooler plates, they will get the whole fresh air, with some passive heatsinks on it, should be easy to cool down a 120W card + 57W CPU. 

 

will post any updates when done 🙂

[Annihilator]

just will order another CPU fan, fits perfect in the secondary HDD/SSD bay n can blow fresh air straight to the GPU heatsink, need to make a fan cable splitter bcs will put it straight to the CPU fan connector(should handle 0.6A in total). so few holes in the bottom cover, connect the cable, put the fan in n fresh air to the mem + GPU heatsink(will solder 2mm copper heatsinks on it for maximum performance)

 

g).

[Annihilator]

ok, next step done: found n took a 4x4GB set of kingston 2133MHz mem, now just waiting for the parcel from aliexpress n the P5200 from poland from @colohgc. 😄 new palrest ordered too, the old one looks good but its sticky(really dont know why in the 2000s everyone putted those shitty coat on everything what get sticky after couple of yrs, even ferrari did on their knobs in 400k+ cars 😵‍💫), backlit keyboard to find with CH layout is nearly impossible, so maybe will take a look for a german one. 

 

n seen those samsung v-nand SATA SSDs have a really tiny circuit boards, will try to fit it in secondary bay without case while the "tuning" fan is in, when it fits will use raid0 with a second one... bcs whats better then speed? more speed!! 🤪

 

n still thinking about hailo-8 in the WWAN slot 🫠

[Annihilator]

finally arrived:

 

 

palmrest n 2x4GB 2133(2x4GB still on da way) arrived too... maybe will put tomo all together 🙂