runix18 Posted July 21, 2024 Share Posted July 21, 2024 Have you tested your usb stick as bootable? Have you confirmed that? 1 Desktop - MSI X670E Tomahawk Wifi (cheap Ebay mobo that I fixed) | AMD 9800X3D | 64GB Corsair Vengeance RGB DDR5 6000MHz CL30 Dual Channel Kit | MSI RTX 4070TI Suprim X | Alienware 27 AW2724DM 2K 165 Hz Gsync | Samsung 990 Pro Nvme - Boot | Other various storage | Windows 11 Enterprise x64 SOLD - Clevo P870DM-G | i9-9700K 4.5 Ghz on all cores (-50 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64 Link to comment Share on other sites More sharing options...
Scourge Posted yesterday at 11:31 AM Share Posted yesterday at 11:31 AM On 7/21/2022 at 7:29 PM, biodi said: It is alive 😀 Hi! Not sure if you're still following this topic or not, but I have the exact same Clevo laptop and I am planning on trying to flash the bios on my P870DM-G using this TCH341A 24 25 Series Programmer, which looks identical to yours in the picture. I've never done this before so I had some questions: 1. Is that NeoProgrammer software still available? Should I use that to do this with my programmer? 2. Your post says you used a CH341B programmer. I got a CH341A programmer. Is there a difference? Will it the "A" version cause any issues? Can I use that same NeoProgrammer software with my CH341A programmer to flash my P870DM-G bios chip? 3. I have two BIOS on hand. The one directly from my original reseller is P870DMG.02 and the other from an old Notebook Review thread is P870DMG.08. Both files are 8,192 KB in size exactly uncompressed, so I don't know if they are actually different or not. They don't appear to have official file extension names. I was going to try those to see if it works. Do I need to rename them in any way to get them to work? Example, should I change the .02 to .ROM or .BIN? If so, do I need to convert them to different file types, or is just simply renaming them good enough? 4. On the PC I'll be running the programmer software on, do I need to plug the programmer into a powered USB-C port, or will any USB port work? I think all my ports are USB-C anyway. 5. I've been posted in this THREAD on the site and Runix has been helping me out a bit. I just wanted to get your input since you have the exact same laptop I have and you seem to have had success. Mine is the single 980GTX 8GB Desktop model with the 6700K CPU. I have all the original stock parts in the board. Haven't done any modding yet. I just want to get it up and running again first and foremost in stock condition and then if it actually works, I can try some new things with it. Thanks for any help! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now