Br14nfüd

This guide is pretty comprehensive. Except sometimes with motherboards on step 4 you need to go into your 'Warehouse' and choose a "value added service", and pay them a little to remove the battery, otherwise it won't ship on an airplane. (Also any accessories that are unnecessary, heavy or bulky can be removed to save shipping cost/weight.) https://www.reddit.com/r/MechanicalKeyboards/comments/7nvc5x/guide_how_to_use_superbuy_to_order_from_taobao/ This is a P775TM motherboard: https://item.taobao.com/item.htm?abbucket=2&id=726455604028 This one needs a translator XD: https://item.taobao.com/item.htm?abbucket=2&id=749948698130 To California shipping is probably $20-40 (it varies). Not sure Latvia.

Thanks for your guide. I'll be trying your platform ID hack in future because I like the Drivers to install properly 😅. I think I need to go back and add some 1.3mm pads to my inductors. Do you have the pictures available for download again? (If files.fm just needs to reset the bandwidth I can wait for that). Project: I got a great deal on a P750TM1 (I think it's really the same as P751) and I went for the 3080 over the 2080 because the price is only $50 difference. I used TaoBao and SuperBuy to locate the Heatsink. I think it was around $105 after shipping. I have 2x styles of QTJ1, the bare die and the heatspreader one. I am thinking I can make it work if I de-lid the one and put it under the contact frame of the other. But then I need a copper slug to make up the difference in height. (It's also a huge pain to get the contact frame held down on the one side, I'm using some threaded rod and 2 sets of bolts, I will need to clearance the underside of the heatsink for the bolts, and make sure the top bolt doesn't hit the heatpipe by using washers.) I have put that on the back burner until I get the GPU running properly. For now since I sold the 8700k I am using a 9700F. Kind of a lateral move, but it's OK.