Hello everyone,
I just registered and I hope I'm posting in the right section. I'm having an issue with my notebook and I'm hoping someone more experienced can point me in the right direction.
The Problem:
When I press the power button, the notebook turns on. The fans start spinning slowly for a few seconds, then suddenly ramp up to maximum speed and keep running at full throttle. The screen stays black (no image, not even the boot logo) and it never reaches the BIOS. I've also noticed that both the CPU and the RTX GPU remain cold, as if they aren't receiving power or the system isn't actually starting the Power-On Self-Test (POST). It gives the impression that the system "starts" but gets stuck immediately after.
System Details:
· Model: Clevo P775TM1-G (or P775TM1)
· Serial Number (S/N): 1 TP775TM9440274 TPM
· Part Number (P/N): 6-77-P775TM1A-NO2#20
· Processor: Intel Core i9 (9900K)
· RAM: 64 GB
· Graphics Card: NVIDIA RTX 2060
· MAC Address: 80FA5B765D7D
What I've already considered:
From the research I've done, I've seen that these chassis often require updated or modified BIOS versions (like the "dsanke mods" mentioned on some forums) to ensure full compatibility with i9 CPUs and RTX graphics cards. I've read that without proper BIOS support, the motherboard might not correctly recognize the hardware, leading to symptoms similar to mine (fans at max speed and black screen).
My Request:
Does anyone have a valid link for the BIOS (and maybe also the EC firmware) for this model? Possibly an unlocked or modified version that supports the i9-9900K and RTX 2060? Unfortunately, many links I've found in old discussions are dead.
If anyone has experienced the same problem and solved it, any guidance on how to proceed (flashing procedure, stable version, etc.) would be incredibly valuable.
I know that flashing is a delicate operation, but at the moment the notebook is unusable, and I need to try this path.
Thank you very much in advance for any help!
Hello everyone, I just registered and I hope I'm posting in the right section. I'm having an issue with my notebook and I'm hoping someone more experienced can point me in the right direction. The Problem: When I press the power button, the notebook turns on. The fans start spinning slowly for a few seconds, then suddenly ramp up to maximum speed and keep running at full throttle. The screen stays black (no image, not even the boot logo) and it never reaches the BIOS. I've also noticed that both the CPU and the RTX GPU remain cold, as if they aren't receiving power or the system isn't actually starting the Power-On Self-Test (POST). It gives the impression that the system "starts" but gets stuck immediately after. System Details: · Model: Clevo P775TM1-G (or P775TM1) · Serial Number (S/N): 1 TP775TM9440274 TPM · Part Number (P/N): 6-77-P775TM1A-NO2#20 · Processor: Intel Core i9 (9900K) · RAM: 64 GB · Graphics Card: NVIDIA RTX 2060 · MAC Address: 80FA5B765D7D What I've already considered: From the research I've done, I've seen that these chassis often require updated or modified BIOS versions (like the "dsanke mods" mentioned on some forums) to ensure full compatibility with i9 CPUs and RTX graphics cards. I've read that without proper BIOS support, the motherboard might not correctly recognize the hardware, leading to symptoms similar to mine (fans at max speed and black screen). My Request: Does anyone have a valid link for the BIOS (and maybe also the EC firmware) for this model? Possibly an unlocked or modified version that supports the i9-9900K and RTX 2060? Unfortunately, many links I've found in old discussions are dead. If anyone has experienced the same problem and solved it, any guidance on how to proceed (flashing procedure, stable version, etc.) would be incredibly valuable. I know that flashing is a delicate operation, but at the moment the notebook is unusable, and I need to try this path. Thank you very much in advance for any help!