MS-16L13

Maybe your email was blocked by his Chinese email. You can ask that MXM to nvme developer, he can also contact that MXM to PCIE developer.

The first to get the 5500XT to output an edp signal was the developer of that adapter board.

You have to ask the developer of the adapter board to know this question. Only he knows the way to make MXM graphics card forced output edp.

This method didn't work on both versions of the CD P5200. I also noticed that you were using the standard version driver instead of the DCH driver, so I also purposely installed the standard version driver to test it. The DP output definition is determined by VB, and the MS-16L3 (Z270 chipset) machine can output DP normally and can display the full hardware ID instead of 8 zeros like the MS-16L1 (Z170 chipset). I presume that the hardware of the 16L3 machine has reached a certain condition in VB, so it can display the DP and hardware ID normally.16L3 machine also has obvious flaws, it can't use graphics cards below Pascal's core, such as GTX9XXM, below Pascal's core of this generation can't be used normally on 16L3. Now there are two solutions, the first for the P5200 flash into only HDMI and DP output version 86.04.71.00.16 VB. and then the card to modify the edp-related resistors to make it forced to output edp signal. The second solution is to find the right VB, Lenovo Toshiba These two brands of laptops have been launched with the P5200 graphics card machine, good luck if one of them will be perfectly compatible with the 16L1. best or to extract the ZBOOK 17G5 native P5200 VB.

2252303331@qq.com This is the email of the developer of the X16 adapter board on ebay and aliexpress, you can ask him directly.

This black version and the green version are the same, with the green version slightly earlier than the black version. The developer of this board is my acquaintance, the price can be really expensive, he himself in China to sell the price is less than a hundred dollars.This one is also available on (闲鱼).The big green board this person is sellinghttps://m.tb.cn/h.URbjyYs?tk=zviMddd2uBS

MXM to PCIE X16 version adapter boards are available for sale on aliexpress(https://pt.aliexpress.com/item/1005004569389235.html).This black version is not too compatible and easy to break, the green one is the nv official cooperation production, compatibility is very good and good quality. But few stores sell them, and now you can only see people selling them on China's ebay (闲鱼).

You can't flash 3070Ti VB for the A4500.The two cards don't have the same VRAM configuration, and the A4500's memory support ECC. After I flashed the ZRT desktop core 2070 into the laptop core 2070Vbios, it didn't even work properly.

In fact, starting from this generation of Pascal, nvidia's VB are encrypted and no one can edit them. At best, the power consumption can only be modified. And in the Pascal after the core even modify the power consumption can not be. Not to mention modifying the VB display channel, someone once tried to add a display output to the VB of the P106 finally failed. This type of MXM graphics card to play the driver code 43, there is a special situation that few people know. The ZBOX en series of zotac I don't know if you've heard of them, their graphics cards use zotac custom 1060 1070 1080 mxm graphics cards, of which there are two versions of 1080, one of the CPU slot is LGA, when someone modified the bios for it so that it can support intel 9 generation Core. Finally it worked, we managed to use the i9 9900 in ZBOX en1080, but something strange happened, the graphics card appeared 43, no matter how to install the driver to change the inf is code 43.The solution is to flash it into a MSI 1080MXM graphics card VB. nvidia does not want a MXM graphics card to be used on different machines, so there is some kind of hardware whitelist restriction between the driver and VB on some machines. The MXM to PCIE adapter board I mentioned above can ignore this restriction. It can install any MXM graphics card without modifying the inf, you can directly install the driver to use. Finally, you can try to test this A4500 card using a machine like the P15X SM/A GT60 (16F3 /16F4) that relies on the output of the integrated graphics card. Such machines can even use P106MXM and ZRT's 2070 desktop core MXM graphics cards.

Your A4500MXM graphics card looks to be laptop core, desktop core A4500 I remember the beginning of GA rather than GN, I think the problem with this A4500mxm card is that its VB does not do the definition of edp output, and the card itself does not have the hardware conditions for edp output.This GN20 core is 100% supported by edp output. If you want to install it on a laptop to use, you must flash into a VB with EDP output definition, in addition to the need to find professional repair personnel to make up the edp output channel of the card.

There is another extreme case here, and that is the use of desktop core MXM graphics cards. Two examples are the 2060S and 2070 cards produced by ZRT. This type of graphics card is certainly not have edp display output, which is determined by its core.、 To make it output edp signal on the laptop can only replace the N19E mobile core, and then the hardware modification to do. If do not carry out the core transplantation and other hardware modifications, directly installed in the laptop will appear and your similar situation. Another option is to use the MXM to PCIE adapter board.It is compatible with any MXM graphics card, whether it is CLEVO MSI HP DELL or aetina and ZRT.

Vbios determines the power consumption frequency ID and display output channel definition of the graphics card. This comes with the caveat that the edp definition pins on the MXM graphics card's slots have lines to the core. The method I mentioned to force the edp output on does not mean modifying the vbios, but modifying the hardware of the card such as changing the configuration of certain resistors. Take the 5500XT MXM graphics card for example, it does not have the hardware conditions for edp output itself. At this point you can't get it to light up the edp output screen no matter what vbios you flash. But you can modify some resistors to force it to edp output signal. 5500XT and your A4500 is the same 3 DP 1 HDMI output. Does not support lvds and edp, but the 5500XT has now been modified by some service engineers to make it successfully output edp signal by modifying the graphics card hardware.

Original inductor test 1khz frequency 19a when the temperature drift began to appear What concept isat and irms all false mark more than 30%. After replacing the new inductor without heat dissipation 1khz test 30a temperature 76 degrees inductance value no change, datasheet isat standard 37a 20% inductance value decay fully met the standard. Heat gun heating inductor over a hundred degrees 1khz test 25a still no significant change.

A brief analysis of the power supply of the CLEVO 30 series MXM graphics card. A total of 11 phases of power supply, 7 phases to the core, 2 phases to the memory, 2 phases of auxiliary power. After multiple data checks Mos tube parameters stable 50a maximum 60a, inductor isat 70a irms 45a. This time the question arises, the discerning eye can see at a glance that the parameters of this inductor has a big problem. This package of inductors can have such high parameters, in fact, there is really no, and the false label is very serious. The real isat may only be about 30a, and the inductance drops very quickly, and the datasheet does not match.

3dmark