AW17 r1 Black screen

[Tenzzy]

I bought the AW17 last week and have since installed the A14+ BIOS and run some benchmarks. However, since yesterday, it won't turn on. When I press the power button, the FX LEDs light up, but the screen remains black (not even the backlight comes on), and I don't hear any beeps. Is there anything I can do?

 

 

[SuperMG]

27 minutes ago, Tenzzy said:

I bought the AW17 last week and have since installed the A14+ BIOS and run some benchmarks. However, since yesterday, it won't turn on. When I press the power button, the FX LEDs light up, but the screen remains black (not even the backlight comes on), and I don't hear any beeps. Is there anything I can do?

 

 

Did you change anything on the BIOS in terms of settings? Because your sounds like a dead motherboard or a corrupted BIOS.

[Tenzzy]

 

In the BIOS I changed the video output to PEG, nothing else.

[SuperMG]

4 hours ago, Tenzzy said:

 

In the BIOS I changed the video output to PEG, nothing else.

Did you clear the CMOS?

 

Did you backup your old bios? Flash through USB CH314A flasher and see if it does the same thing.

[Eban]

Clear CMOS procedure

 

 

[Maxware79]

Remove the GPU and the system should reset the video mode back to the default SG mode, if you changing it to PEG is the cause of your problem. 

[Tenzzy]

Thanks evryone, i had to clear the CMOS, but didn't do it correctly.

16 hours ago, Eban said:

Clear CMOS procedure