RTX 5060 MXM Images and one small Idea

[janepa]

Luckily I managed to get this GPU card through a barter trade at the local market.

 

I'm not sure if I'm seeing correctly or if I'm going to mad, but take a look at the NVIDIA GBxxx chip number.

 

I also bought a damaged M17x R3 motherboard very cheaply, so I will repair it and try to get running that card on this platform by modifying the BIOS. I will use a 14" 2K 165Hz eDP LCD display since that's the only one I have. That's the little idea.

 

 

Does anyone know where I can get a cheap 40-pin eDP cable for the R3 or R4? I'm assuming it's the same for the R4 model. 

[SuperMG]

17 minutes ago, janepa said:

Luckily I managed to get this GPU card through a barter trade at the local market.

 

I'm not sure if I'm seeing correctly or if I'm going to mad, but take a look at the NVIDIA GBxxx chip number.

 

I also bought a damaged M17x R3 motherboard very cheaply, so I will repair it and try to get running that card on this platform by modifying the BIOS. I will use a 14" 2K 165Hz eDP LCD display since that's the only one I have. That's the little idea.

 

 

Does anyone know where I can get a cheap 40-pin eDP cable for the R3 or R4? I'm assuming it's the same for the R4 model. 

Hello.

 

This card looks like an early sample or ES of the 5060 by looking at the VRMs. They took the B design rather than the A design.

 

Did you take a look at the VBIOS? To see the TDP and the display tables?

 

Since it's an embedded card.

 

You need to enable the backlight pins and add PWM brightness control if possible.

 

Is the 5060 = 4070 level? 

 

I think sliderfra has a R3/R4 eDP cable.

My R4 has an RTX 3080 16GB in PEG, no need to upgrade because of the CPU and its lack of recent instructions.