anyone uses nvidia inspector. is 1981.beta the latest.?

[raptorddd]

On 7/30/2022 at 3:10 PM, jaybee83 said:

im actually using nvidia inspector to generate a batch file that i automatically run at windows startup. the batch file forces the 980M to lowest possible voltages and clocks no matter the load (completely fine for desktop usage) and thus severely limits its power usage.

i manually tested what kinda clocks i can get away with, if u go too low u start seeing graphical glitches and/or stutters.

could you help on that batch file. i want nvidia inspector to run at start up.

[jaybee83]

54 minutes ago, raptorddd said:

could you help on that batch file. i want nvidia inspector to run at start up.

hey bud, happy to help. currently on my honeymoon but will be back from the 13th onwards. hit me up via DM as a reminder and ill be sure to post the batch files here :) 

[raptorddd]

8 hours ago, jaybee83 said:

hey bud, happy to help. currently on my honeymoon but will be back from the 13th onwards. hit me up via DM as a reminder and ill be sure to post the batch files here 🙂

sure.

 congratulations enjoy the honeymoon.

[jaybee83]

On 11/9/2022 at 6:38 AM, raptorddd said:

could you help on that batch file. i want nvidia inspector to run at start up.

 

alrighty, back from the honeymoon and a bit of time to help out my fellow forum mates 🙂

 

I have attached the batch files I was using previously with my 980M, generated the commands using Nvidia Inspector shortcuts (the commands are listed in the shortcuts details when right clicking on their properties).

 

as for autostarting, there are three different options that ive used previously:

 

1) Regedit

go to: hkey_local_machine / software / microsoft / windows / current version / run

and add a string value with the location of the batch file to run, i.e. C:\Files\Name.Bat

 

2) Regedit

As above, only use a different location for the string value:

hkey_local_machine\software\wow6432node\microsoft\windows\currentversion\run

 

3) Task Scheduler

Create Task - General / Add Name / Run with highest priviliges / Windows 10
Triggers - New / At Log On / (Optionally Delay Task for 15-20 seconds if any issue applying)
Actions / New / Start a Program / Input Program or File Location (in our case the location of the batch file)

 

hope this helps!

 

cheers

 

PS: Notice how the three batch files have sometimes differing command structures, this depends on what kinda settings u applied in Nvidia Inspector, be it underclocking / power limits or overclocking.

 

Nvidia 980M Inspector Batch Files.zip

[raptorddd]

12 hours ago, jaybee83 said:

 

alrighty, back from the honeymoon and a bit of time to help out my fellow forum mates 🙂

 

I have attached the batch files I was using previously with my 980M, generated the commands using Nvidia Inspector shortcuts (the commands are listed in the shortcuts details when right clicking on their properties).

 

as for autostarting, there are three different options that ive used previously:

 

1) Regedit

go to: hkey_local_machine / software / microsoft / windows / current version / run

and add a string value with the location of the batch file to run, i.e. C:\Files\Name.Bat

 

2) Regedit

As above, only use a different location for the string value:

hkey_local_machine\software\wow6432node\microsoft\windows\currentversion\run

 

3) Task Scheduler

Create Task - General / Add Name / Run with highest priviliges / Windows 10
Triggers - New / At Log On / (Optionally Delay Task for 15-20 seconds if any issue applying)
Actions / New / Start a Program / Input Program or File Location (in our case the location of the batch file)

 

hope this helps!

 

cheers

 

PS: Notice how the three batch files have sometimes differing command structures, this depends on what kinda settings u applied in Nvidia Inspector, be it underclocking / power limits or overclocking.

 

Nvidia 980M Inspector Batch Files.zip 979 B · 2 downloads

thanks but am still a bit confused.. 

this are the settings i want to change

 

overclock file has this

 

"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,0,405 -setMemoryClock:0,0,324 
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,1,405 -setMemoryClock:0,1,810 
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,2,540 -setMemoryClock:0,2,1600
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setBaseClockOffset:0,0,0 -setMemoryClockOffset:0,0,400 -setVoltageOffset:0,0,0 -setTempTarget:0,1,92 

 

i need to edit this right.?  where is memory shade. ?

[jaybee83]

4 hours ago, raptorddd said:

thanks but am still a bit confused.. 

this are the settings i want to change

 

overclock file has this

 

"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,0,405 -setMemoryClock:0,0,324 
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,1,405 -setMemoryClock:0,1,810 
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,2,540 -setMemoryClock:0,2,1600
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setBaseClockOffset:0,0,0 -setMemoryClockOffset:0,0,400 -setVoltageOffset:0,0,0 -setTempTarget:0,1,92 

 

i need to edit this right.?  where is memory shade. ?

 

if you go to the overclocking section in Nvidia Inspector, ull see that u can only adjust GPU core and vRAM. there is no separate slider for Shaders. I guess those would be adjusted automatically with the GPU core at a ratio of 2:1 like listed in your screenshot.

[raptorddd]

7 hours ago, jaybee83 said:

 

if you go to the overclocking section in Nvidia Inspector, ull see that u can only adjust GPU core and vRAM. there is no separate slider for Shaders. I guess those would be adjusted automatically with the GPU core at a ratio of 2:1 like listed in your screenshot.

actually on my quadro 2000m is the other way around. clocks is greyed out but when i move shaders slider then clocks moves.

 

 

but do i have to edit the batch file right.?

 

i found this.. is part of a code.

 

Run, "C:\Program Files (x86)\Nvidia Inspector\nvidiaInspector.exe" -setShaderClock:0`,2`,1619 -setMemoryClock:0`,2`,1250 -setVoltage:0`,2`,970`,
}
 

in my case since gpu is greyed out i need to set shader.??

 

 

[Aaron44126]

If you press "Create clocks shortcut" does it not create a shortcut for you with the right commands in it for the settings that you have chosen?

[raptorddd]

1 hour ago, Aaron44126 said:

If you press "Create clocks shortcut" does it not create a shortcut for you with the right commands in it for the settings that you have chosen?

in nvidia inspector after i set clocks.?? yes it creates a shortcut. that when double click on it it sets those clocks. as a reboot resets default clocks.

i have the shorcut. what i want is to turn on laptop and have those clocks apply everytime i turn on or restart laptop.

[Aaron44126]

2 minutes ago, raptorddd said:

in nvidia inspector after i set clocks.?? yes it creates a shortcut. that when double click on it it sets those clocks. as a reboot resets default clocks.

i have the shorcut. what i want is to turn on laptop and have those clocks apply everytime i turn on or restart laptop.

 

Inspect the shortcut properties and you should be able to find the commands it put in there.

[raptorddd]

5 hours ago, Aaron44126 said:

 

Inspect the shortcut properties and you should be able to find the commands it put in there.

C:\Users\*****\Desktop\nvidiaInspector\nvidiaInspector.exe -setShaderClock:0,2,1200 -setMemoryClock:0,2,950 -setVoltage:0,2,900 

 

found them..

thanks

 

so this is jaybee script file

 

"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,0,405 -setMemoryClock:0,0,324 
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,1,405 -setMemoryClock:0,1,810 
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setGpuClock:0,2,540 -setMemoryClock:0,2,1600
"C:\Gabriel\Programs\Nvidia Inspector\nvidiaInspector.exe" -setBaseClockOffset:0,0,0 -setMemoryClockOffset:0,0,400 -setVoltageOffset:0,0,0 -setTempTarget:0,1,92 

 

i only need this edited in file.

C:\Users\*****\Desktop\nvidiaInspector\nvidiaInspector.exe -setShaderClock:0,2,1200 -setMemoryClock:0,2,950 -setVoltage:0,2,900 

[raptorddd]

UPDATE. ok i got it working

copied the shorcut command in properties to .bat file placed it in start up folder and it works. thanks @jaybee83 and @Aaron44126

[jaybee83]

On 11/15/2022 at 5:13 PM, raptorddd said:

actually on my quadro 2000m is the other way around. clocks is greyed out but when i move shaders slider then clocks moves.

 

 

but do i have to edit the batch file right.?

 

i found this.. is part of a code.

 

Run, "C:\Program Files (x86)\Nvidia Inspector\nvidiaInspector.exe" -setShaderClock:0`,2`,1619 -setMemoryClock:0`,2`,1250 -setVoltage:0`,2`,970`,
}
 

in my case since gpu is greyed out i need to set shader.??

 

 

 

huh, interesting! havent used a mobile quadro before, so not familiar with those. but in the end its basically the same, with one u also control the other since theyre linked 🙂 

 

On 11/15/2022 at 5:16 PM, Aaron44126 said:

If you press "Create clocks shortcut" does it not create a shortcut for you with the right commands in it for the settings that you have chosen?

 

On 11/15/2022 at 6:45 PM, Aaron44126 said:

 

Inspect the shortcut properties and you should be able to find the commands it put in there.

 

exactamente! thats basically how i did it haha. pretty simple and straight forward.

 

7 hours ago, raptorddd said:

UPDATE. ok i got it working

copied the shorcut command in properties to .bat file placed it in start up folder and it works. thanks @jaybee83 and @Aaron44126

 

awesome, good job! btw, what ive noticed on my 980M was dialing back from OC or Stock settings to powersave settings, ill have to apply the batch file multiple times before everything is set correctly. to streamline this, ull notice that i sometimes repeated a set of commands multiples times to have it all neatly executing inside a single batch file. 

[Aaron44126]

Well.  A new update was posted, 1.9.8.6.

[raptorddd]

23 hours ago, Aaron44126 said:

Well.  A new update was posted, 1.9.8.6.

yes when i did the auto start on boot script i found a new version 1.9.8.5 

[raptorddd]

version 1.9.8.7  available

https://orbmu2k.de/tools/nvidia-inspector-tool
http://download.orbmu2k.de/files/nvidiaInspector.zip