Jump to content
NotebookTalk

Kyser777

Member
 View Profile  See their activity

  • Posts

    18

  • Joined

  • Last visited

 Content Type 

Everything posted by Kyser777

  1. Kyser777
    it seems that the bios reset itself when the laptop can not boot after several time, can someone else confirm?
  2. Kyser777
    I did use the latest driver before , but I switched to 528.24 driver to get the dynamic boost that give me 15 more watt on the RTX3080. my config is a waste as I could double the power with my efficient watercooler. I would like to boost the TDP to 200W minimum... waiting for a mod..
  3. Kyser777
    here is my result with my p775TM with watercooler: -9900ks 5.2ghz 4.9ghz cache -ram 64gb 1660mhz 14-17-17-32 1.4v -RTX3080m with dynamic boost 165w
  4. Kyser777
    yes I have an unlocked bios I understood the problem.... you needed to enable #QCKL odd ratio# to get this extra 60-70mhz
  5. Kyser777
    impossible to run away from the bios error message with 128GB of ram and thunderbolt enable I had to reduce the ram amount to keep the thunderbolt function... ------ BTW, nowadays my bios setting is resetting after some inactivity time (few hours), I changed the cmos battery with a new one under the keyboard, but the problem persist... what should be the voltage on the cmos battery to keep the setting?? is there any jumper for the cmos?? I hope I did not short something with the water-cooling system. any tips to diagnostic the problem?
  6. Kyser777
    I got the same ram module than you (ballistix) how do you modify the ram speed?? , your is 1675mhz.... in my bios with memory ratio at 12 I got only 1600mhz what is your full setting to get your performance including bios etc... is there some secret bios setting needed apart from the main memory overclock menu? Thanks!!!
  7. Kyser777
    I made test when thunderbolt is disable in the BIOS , I can boot.... Why??
  8. Kyser777
    my p870 (KM version) with 128GB of Ram can not boot I got PCI RESOURCES ERROR!!!!! error: insufficient PCI resources detected!!!! however it works fine with 96GB of ram (3x 32gb) or less my bios is the latest danske 128GB I heard a problem on the forum with thunderbolt and 128GB , is it related?? any FIX???
  9. Kyser777
    how did you enable rebar??
  10. Kyser777
    any advantage to update the microcode on 9900k and 9900ks with the latest version, any update logs?
  11. Kyser777
    thanks for your info! what can we do nowadays to boost RTX 3080 performance apart from making conventional overclocking?
  12. Kyser777
    is there a way to apply a 200w modification to a non-g-sync card vbios? there is no logic reason that it cannot be done... my water-cooling system is waiting for this 200w card! if someone have a 200w vbios for rtx 3080 as well, I will be happy too.
  13. Kyser777
    FIXED!!!! first remove all power source including the battery of the laptop. use the CH341A programmer with 1.8v adapter (check the picture). use the soft #neoprogrammer# to flash the vbios and set the IC to the Vbios type model. clip the bios correctly and make connection. I flashed with the backup vbios and the screen light up again perfectly always backup your original bios, vbios before to flash in case of problem. I am just sad I can not mod to 200w..... hope this topic helps others
  14. Kyser777
    according to a forum member , my RTX mxm card is not g-sync type and therefore was incompatible with the alienware vbios making a black screen on the internal display. does the Falcon security allow me to flash back again the original vbios? do I need a 1.8v programmer ? any guide to flash with a programmer the RTX bios? thanks
  15. Kyser777
    I just flashed my p775 RTX 2080 with a 200w mob vbios, https://drive.google.com/file/d/10bU9egVEpbdLLAHE-DBZo0fdOnN8DQjN/view after the reboot , the laptop seems to work but I got a black screen😬. what is the solution to reflash with original vbios or workaround to this issue given that I have no display on the lcd panel and hdmi port? if I need to reflash externally the mxm RTX 2080, what programmer should I buy thanks for your advice
  16. Kyser777
    is it possible to get a complete Tutorial to get the maximum of the RTX 3080 installation on clevo p775 and p870 with all successful mod including G-sync, power mod, driver fix, etc. it will be useful for clevo p775 and p870 owners including myself for future upgrade and prolong the life of their laptop. with all the knowledge been randomly exposed about the subject, it is time to sum up with A BIG CLEAN TUTO thanks!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use