Jump to content
NotebookTalk

ShifflyTheSHO

Member
  • Posts

    52
  • Joined

  • Last visited

Everything posted by ShifflyTheSHO

  1. voltage and pinouts are very different!!! eDP conversion will 100% be necessary.
  2. Okay, so on a new install of Windows 10 Pro the NVInstall exe I made now freezes the system on installation. i think I used 7509.1558 in place of 7715.1558 or whatever that last one was and now the one before that and every try I will have to make a new OS since I bought a 9900KF for whatever reason, lol Any ideas as to how I should install the GPU drivers now? IDK if I broke something off of the GPU or board and I wish I could check it. i have a 1070 sitting here ready to swap in too…
  3. Also, it didn’t show my GPU (RTX 3080 16GB) in the Device Manager screen, any idea what is disconnected? I took off the heatsink and reconnected the cable well enough I thought, but did something break? (Despite the screen, I cracked that during the upgrade where I have the wrong cable.
  4. Like, would there be a way to power one of these boards internally from our motherboards? Do we have 5V anywhere inside or how creative would we have to be to get this thing working? Please don’t make me settle on a 1440p 240hz screen!!! I want the 2880x1620 120hz AMOLED since its just right for an RTX 3080!!
  5. Fixed the second on too!! i should have taken pictures of the flimsy metal sticking out of the connector, all janky like, but I had other things to do.
  6. I stuck some pins from an old MSI board into the battery connector to make the connections on one P650HS and it worked!!! Now I have a second one charging that has two amber lights currently while powered off, but windows isn't showing the battery…. I had the battery running fine in a P650RE I believe, but hopefully it just went dead while sitting. Does two amber lights while powered off (AC, and Battery) mean that it is charging? I have a third battery somewhere too, but I hope its working even though its only a 180W charger for now.
  7. Oh, Heaven Benchmark works perfectly fine. Maybe 3D Mark or whatever is called corrupted Nope. Computer just locked when I Alt-F4’d.
  8. So the MXM RTX 3080 16GB has a Device ID of 24DC.7509.1558 instead of the one more commonly listed here and the number doesn’t appear in NVcleaninstall. Does anybody have any idea how to get this thing to run CUDA? I can run SRB2Kart at a smooth 120 fps at 2880x2160 or 2160x1620 perfectly fine, but as soon as it comes to running 3D Engine worth some effort, computer just locks up and and never even start processing the graphics. Computer is a P750DM3 with RTX BIOS flashed and running a 9900KF. I used a driver package that was 24DC.xxxx.1558 (can’t remember) and added the line to the second field, but Time Spy keeps right on crashing the laptop at start. Where am I going wrong?
  9. Oh, and use Custom Resolution Utility (CRU) to set a Freesync range for your Gsync monitor! (Worked on my P650RE and P650HSs, so it should work after this reset!)
  10. Oh, NVCleaninstall works. my device was 24DC.7509.1558 and I installed it with the 24DC.7715.1558 driver set. ignore my stupid question, you can figure it out!!
  11. I’ve been to multiple sites and everything eludes to some mythical inf file but I can’t find the instructions. I’m running a P750DM3 flashed with the RTX BIOS (that still displays with my 1070 because I had bitlocker kick in and require me to reinstall the old GPU) and a 9900KF, but IDK which steps to next…. Thanks in advance.
  12. Speaking of batteries, should I jam a cut up paperclip in the connector and not worry about my two and a half pins being canned? i will call this assignment Operation: Paperclip. This post should stir up any bad memories at all, whatsoever.
  13. Well, two and a half pin ”Pinnnnnnnnnnnnnn……….” So anyways, since the connector stays snug, would it be advisable to cut a paperclip into sections and plug the connector’s holes and just fit it right in there? Like, is that enough Amperage or would it allow too much current? I will go full send in a but because these are my favorite laptop chassis ever! (Suck it P750 and your modularity…. Crappy plastic) Seriously though, I’ve never seen this as a fix but it sounds feasible!! Should I measure the battery readout or draw in windows if I do it? Like, I have a 7700HQ (2666mhz) and 125W 1070: I don’t want to toss out a perfectly good board that doesn’t have a battery connection! I’m also rehoming a sister unit that doesn’t have case damage and only a 1080p Gsync screen, but the bad battery one was supposed to be gone. (They look the same with DSR almost). Why did they stop building such high quality laptops!? The P650 is so much better than my Eluktronics Mech 15 G3, whichever Clevo that one was… and 2070 Super, 10th Gen, and CL17 3200mhz be damned, this thing is beast!
  14. The 17R4 I have works with either touchpad or ribbon connection. The new 17R5 doesn’t work with either!
  15. When single channel, it boots perfectly fine, both rank doing pretty good, but the i7-6700HQ memory controller can’t power rhem or something? Is there a flash to allow more voltage in rhis and/or the System Agent (SA)? is dual rank single channel going to be just as quick as dual channel single rank on laptop? I have a 970m 3GB in this thing, so I want all the help it can get!!????? and why are these VRAM modules like, 512GB a piece? I thought this thing had 6GB… now its like a 1060m 3GB basically…
  16. Do the R5 and r4 have different touchpads? Mine still works, but no back light on either of my touchpads! I have tried most every fix, even search rhe driver OD for the “I2C HID” device and installed/repaired multiple times… could the Recovery OS do ot? i swapped touchpads for nothing!!! Lol just looking to see who’s swapped an R5 board into an R4, could that be the reason why it doesn’t work?
  17. Just got done with mine, only one new connector and no Recovery installed at first, and my touchpad backlight doesn’t work, if anyone has any solutions? How do you get your touchpad backlight to function? my 17R4 works with eitber pas or ribbon/plate, but my 17R5 board is having that as the final issue!
  18. Does any of the Dell update software work? does you touchpad backlight work?
  19. For my P650SH , I used the Custom Resolution Utility to manually set my 4K display with corrupted EDID data to both have both 48hz and 60hz in its selectable resolutions with the Freesync range data marker and then Nvidia was able to recognize that it was a Gsync display!!! Without CRU, my display was nothing but a black screen whenever the Nvidia display drivers would load, but I have my 135kHz Modded Trinitron right next to my workstation as a primary display while I figure out which screen to give my P750DM3…. Like, is it really a 40pin connector and why or how is the Alienware m15 r6 240hz 1440p screen a 30pin connector? Thanks Dell, now I have to bug an eDP board from China and make it fit inside my case to use my 1620p 120hz OLED against and make it work fr… LCD panels are all garbage to me anyways, so maybe this was a sign to make that 3080 16GB push the resolution it was designed to use… lol my 21” CRT is at 120hz 2160x1620 thanks to DSR factors, so I should probably go AMOLED or keep my 60hz 1080p.
  20. Too high SA gives me instability or no boot it seems, and Memory Controller is a separate function for us, but I need to set it to 4 so that the RAM runs at full speed with 4 DIMMs and that thing flies way faster than 2400mhz on all four DIMMs!! i want to better understand what Ring PLL does and why or how System Agent is different than Memory controller. I have a 9900KF so no difference with the GT afaik.
  21. PNY CL20 RAM also sucks ar 3333mhz cl20 and 3200mhz CL18 where the other ones do fine! Timetec CL16 can run 16-18-18-36, tFAW 28, and tREFI 12480, tRFC 448, and tRTP 12 at 1.35v, but you might have to bump the Memory Controller by 2. 4 causes instability with out 4 sticks and I don’t know why I didn’t recognize that sooner…
  22. Memory controller: 4, 5, or 6 times 0.0175. 7 times is too much voltage and it will instantly power down.
  23. And the P650HS heatsink: went from a 6700HQ to a 7700HQ, and a GTX 1060 6GB to a 1070! i still haven’t paid a P650RE with the GTX 970m 6GB… should I get a 980m motherboard and heatsink? I mean, mine works and is for sale, but is it worth it over the 970m? Also, this is the nicest finish on any laptops I’ve ever experienced! Everything new is breaking away in just a few years but this thing could break a car window in an emergency, and has enough battery until the wrecker arrives!
  24. Well, the board didn’t power on so I shipped it back today Eluktronics #0000001… …and my P650HS arrived, but the BIOS is locked and the GPU might be bad. Also, it needs thermals, but this combined heatsink is COOL!!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use