Jump to content
NotebookTalk

Komputers-Best

Member
  • Posts

    68
  • Joined

  • Last visited

Everything posted by Komputers-Best

  1. Yes, if it really comes out, it will be a good sequel even purely because of the 18-inch screen.
  2. For me, this one is better, although it is also a desoldering.. Alienware x17 R2 Gaming Laptop | Dell USA
  3. There's nothing outstanding about it, it's all marketing..
  4. Disposable shit, everything is soldered on the board.. 🤮
  5. The fan blades on the photo are wrong, in fact they are the opposite. The processor frequency is 4.2Mhz, Throttling is minimal in load.
  6. I installed a cooler from a PC and attached a fan that is powered by a power supply and put the whole thing on a cooling stand. As a result, the processor temperature in idle 32-35, the load does not exceed 77 degrees, decreased by an average of 12 degrees, the temperature of the video card also dropped by 5-7 degrees. It turned out to be a collective farm, of course, but stable. 👀
  7. Yes, it is an inf file, you need a similar id, I chose something from 1080.
  8. In Alienware 17, if you install zotac 1080, you will need to break off the upper bar, it will not fit like that.
  9. In Alienware 17, I also installed the zotac 1080 card, it works fine, but under load it enters trolling, apparently there is not enough power to it, or the slot on the motherboard is too weak for this card. Bios used this one.. 206523.rom
  10. I do not advise installing it in the first slot, it does not fit there, you will need to solder the power connector and transfer it externally with a wire, it is better to install the card in the second slot, where it works better and warms up less through optimus.
  11. Xmmm is strange, but I have a light theme. 😕
  12. A lot of people have not found a new resource from NBR or simply refuse to re-register here, if it were possible to send information about the new resource to old participants, it would be great.
  13. I couldn't find it anywhere. I heard that for this laptop there are unlocked bios A10 V2 or V3 with an even more unlocked bios.
  14. Have you ever tried to run it on other similar laptops except R2 and A18..?
  15. Yes, everything worked, I had two sensors involved, one for the processor and the other for the video card, well, I'll say this, after all, the radiator from Alienware 18 is weak, I had to additionally install copper plates both on the chip itself and around the perimeter.
  16. So someone still buys them and makes them..
  17. And where exactly did you order a radiator for it? I would try to install this card on Alienware 17, now I am actively searching for it.
  18. That is, in Alienware 18, the fan on the 1080 card was turned on exactly according to the temperature sensor through the HWINFO program and everything worked, though I don't know how it is in R2.
  19. I installed the zotac 1080 card in Alienware 18 in both the first and second slots, in the first slot it was very hot in games, but in idle time the temperature was 55, I moved it to the second slot and reinforced it with a copper plate on the chip + used the best thermal pads, the laptop worked through optimus, the temperature in idle time was 45-48, in the load reached 86 degrees and since the fan was not spinning, I used aggressive settings to turn it on in the HWINFO program.
  20. People, what is the most recent unlocked bios or the only one so far, no one has installed it for themselves? I saw a person installing RTX 3080 on the forum, he had to modify the radiator.
  21. If a model with UHD was coming from the factory, then analogues usually appear within 2 years, this was the case with many models that recently came out.
  22. Because there is no properly sharpened bios for zotac 1070/1080 for Alienware, I used the HWINFO program and calmly adjusted the fan speeds there.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use