Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 1 hour ago, Reciever said: @Mr. Fox Doesnt RGB add heat ? Or am I thinking of cold cathode? Yes it does. LEDs can generate quick a bit of added warmth. I have MSI's UWP Control Center feces install on my W11 feces OS so I can turn it off with the trash software. (Since it is garbage, I use W11 for garbage collection for things exactly like that. Then I don't have to worry about my W10 getting digital cancer.) 1 hour ago, electrosoft said: I usually target the non RGB variants. On the other hand, when I swapped the wife from 2x8GB white RGB'esque "pretty sticks" that were running @ 3200 18-22-22 to a pair of 2x8GB G.Skill jet black sticks running @ 4000 C14-14-14 all she had to say was, "They don't match and where's the lights?" Clearly there is a market for RGB color face blast.... My major gripe is still the software. Basic lighting control software that somehow needs to be bloated, intrusive and data collection enabled......right.... 100%. If there was a way to turn it off in the BIOS or without installing UWP Store trash software, I wouldn't loathe it so vehemently. 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 7 minutes ago, johnksss said: Edit: When chip is colder it reads SP99 113/72 I think the SP rating is very useful to identify poorly binned CPUs that need to be returned due to poor quality silicon, but I don't think it is 100% accurate past a certain point, and the fact that it changes with temperature and firmware revision makes it even more suspect as being reliable measurement for a whole lot more than spotting on first boot if you have a CPU that needs to be RMA'd immediately. 1 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Talon Posted April 10, 2022 Share Posted April 10, 2022 19 minutes ago, Mr. Fox said: Nice score, and that KS seems like a good sample to me. If CPU-Z is not bugged because of the new CPU 1.225V for 56x all P-core is really good. Is that where you have the BIOS set for voltage, or is it 56x on a couple of cores? Don't have to worry about me taking that crown from you. My 3090 KPE can't seem to hold more than about 2175 under load even on chilled water, so I am unable to even hit 16K. I may pull the block off and replace the KPX with liquid metal and see if that helps (keeping the core colder). That is just on a couple cores. I am using TVB +1 in the BIOS. Under load it was doing 5.3Ghz. The chip does seem decent and am I really happy with the IMC on this chip. Blows my mind how much better it is over my old K. Are you using Resizeable Bar/Forcing it via Inspector? You can pick up a couple hundred points right there. I just learned this trick recently. Benchmarkers hate him. I think I also got pretty lucky in the lottery on this GPU chip. It does 2220-2205mhz locked in the entire run on the freaking air cooler. Of course it's a redesigned cooler with a vapor chamber so that definitely helps. 3 1 Spoiler The Beast Asus Z790 APEX | Intel i9 13900K | ASUS RTX 4090 Strix OC | 64gb DDR5 7466 CL34 Dual Rank A-Dies | Samsung 990 Pro 2TB | Innocn 4K 160Hz Mini LED HDR1000 | LG 27GN950-B 4K 160Hz | Corsair 170i Elite LCD 420mm AIO | Corsair 7000D | EVGA 1600w T2 Little Beast EVGA Z690 DARK | Intel i9 13900K | Nvidia RTX 4090 FE | 32gb DDR5 SK Hynix DDR5 8000 CL36 A-Dies | Samsung 980 Pro 2TB | LG OLED C1 4K 120Hz G-Sync/FreeSync | Alienware AW2721D 1440p 240Hz G-Sync Ultimate | Corsair 115i Elite 280mm AIO | Lian Li 011 Dynamic | EVGA 1000w P6 Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 1 minute ago, Talon said: Are you using Resizeable Bar/Forcing it via Inspector? You can pick up a couple hundred points right there. I just learned this trick recently. Benchmarkers hate him. I am not sure what that means. Is there a new version of NVIDIA Inspector that forces ReBar? I can't use the vBIOS with ReBar support because it is incompatible with CSM and I refuse to run pure UEFI mode. Plus, that won't work with W7. If you enable CSM you'll have a black screen with no video output with a ReBar vBIOS. Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 Just now, Mr. Fox said: I am not sure what that means. Is there a new version of NVIDIA Inspector that forces ReBar? I can't use the vBIOS with ReBar support because it is incompatible with CSM and I refuse to run pure UEFI mode. Plus, that won't work with W7. If you enable CSM you'll have a black screen with no video output with a ReBar vBIOS. You are only doing that for port royal..... 1 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 ughhhhhhhhhhhhhhhhhhhhhhhh SP97 for the KS 2 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Talon Posted April 10, 2022 Share Posted April 10, 2022 7 minutes ago, johnksss said: ughhhhhhhhhhhhhhhhhhhhhhhh SP97 for the KS Add about 10 points to that KS over a K. You lucky SOB! LOL. I hate you. That settles it, I am exchanging this chip in the morning. This is my shitty SP88 KS doing 5.1 with same voltage as you cherry SP98 chip. Ignore the temps, I am using a crap graphite pad for testing and it lets the chip warm up a bit. 2 1 Spoiler The Beast Asus Z790 APEX | Intel i9 13900K | ASUS RTX 4090 Strix OC | 64gb DDR5 7466 CL34 Dual Rank A-Dies | Samsung 990 Pro 2TB | Innocn 4K 160Hz Mini LED HDR1000 | LG 27GN950-B 4K 160Hz | Corsair 170i Elite LCD 420mm AIO | Corsair 7000D | EVGA 1600w T2 Little Beast EVGA Z690 DARK | Intel i9 13900K | Nvidia RTX 4090 FE | 32gb DDR5 SK Hynix DDR5 8000 CL36 A-Dies | Samsung 980 Pro 2TB | LG OLED C1 4K 120Hz G-Sync/FreeSync | Alienware AW2721D 1440p 240Hz G-Sync Ultimate | Corsair 115i Elite 280mm AIO | Lian Li 011 Dynamic | EVGA 1000w P6 Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 1 minute ago, Talon said: Add about 10 points to that KS over a K. You lucky SOB! LOL. I hate you. This is my shitty SP88 KS doing 5.1 with same voltage as you cherry SP98 chip. My SP97 ran that same thing as well..... So maybe we need to try using the other method with CB R23 2 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Talon Posted April 10, 2022 Share Posted April 10, 2022 12 minutes ago, Mr. Fox said: I am not sure what that means. Is there a new version of NVIDIA Inspector that forces ReBar? I can't use the vBIOS with ReBar support because it is incompatible with CSM and I refuse to run pure UEFI mode. Plus, that won't work with W7. If you enable CSM you'll have a black screen with no video output with a ReBar vBIOS. Ahh damn, you can use Nvidia Inspector to force rebar support in games/benchmarks where Nvidia has not officially enabled support simply by using the profiles. 2 1 Spoiler The Beast Asus Z790 APEX | Intel i9 13900K | ASUS RTX 4090 Strix OC | 64gb DDR5 7466 CL34 Dual Rank A-Dies | Samsung 990 Pro 2TB | Innocn 4K 160Hz Mini LED HDR1000 | LG 27GN950-B 4K 160Hz | Corsair 170i Elite LCD 420mm AIO | Corsair 7000D | EVGA 1600w T2 Little Beast EVGA Z690 DARK | Intel i9 13900K | Nvidia RTX 4090 FE | 32gb DDR5 SK Hynix DDR5 8000 CL36 A-Dies | Samsung 980 Pro 2TB | LG OLED C1 4K 120Hz G-Sync/FreeSync | Alienware AW2721D 1440p 240Hz G-Sync Ultimate | Corsair 115i Elite 280mm AIO | Lian Li 011 Dynamic | EVGA 1000w P6 Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 6 minutes ago, johnksss said: You are only doing that for port royal..... I suppose I could put the XOC Rebar vBIOS on another BIOS position and temporarily switch to UEFI mode. But, I need to figure out why more core clocks won't stay above 2175 under load. I think (hope) it is because I can't get the core cold enough. I ran RTSS OSD to see why my Port Royal and other 3DMark scores suck now and noticed it doing that. 1 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 Just now, Talon said: Ahh damn, you can use Nvidia Inspector to force rebar support in games/benchmarks where Nvidia has not officially enabled support simply by using the profiles. I did not know that Inspector and Profile Inspector were recently updated. Thanks for mentioning it. I just downloaded both and will check it out. It had gone so many years without an update I just figured the guy wasn't supporting it any more. Speaking of support, I wonder if Unwinder is done now or what. Afterburner and RTSS haven't been updated for a long time. Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Talon Posted April 10, 2022 Share Posted April 10, 2022 1 minute ago, Mr. Fox said: I suppose I could put the XOC Rebar vBIOS on another BIOS position and temporarily switch to UEFI mode. But, I need to figure out why more core clocks won't stay above 2175 under load. I think (hope) it is because I can't get the core cold enough. I ran RTSS OSD to see why my Port Royal and other 3DMark scores suck now and noticed it doing that. This guy does a pretty good job of explaining how to enable it. I've tested in both Superposition and Port Royal and both produced increased performance. Green Goblin holding out. 5 Spoiler The Beast Asus Z790 APEX | Intel i9 13900K | ASUS RTX 4090 Strix OC | 64gb DDR5 7466 CL34 Dual Rank A-Dies | Samsung 990 Pro 2TB | Innocn 4K 160Hz Mini LED HDR1000 | LG 27GN950-B 4K 160Hz | Corsair 170i Elite LCD 420mm AIO | Corsair 7000D | EVGA 1600w T2 Little Beast EVGA Z690 DARK | Intel i9 13900K | Nvidia RTX 4090 FE | 32gb DDR5 SK Hynix DDR5 8000 CL36 A-Dies | Samsung 980 Pro 2TB | LG OLED C1 4K 120Hz G-Sync/FreeSync | Alienware AW2721D 1440p 240Hz G-Sync Ultimate | Corsair 115i Elite 280mm AIO | Lian Li 011 Dynamic | EVGA 1000w P6 Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 1 minute ago, Mr. Fox said: I suppose I could put the XOC Rebar vBIOS on another BIOS position and temporarily switch to UEFI mode. But, I need to figure out why more core clocks won't stay above 2175 under load. I think (hope) it is because I can't get the core cold enough. I ran RTSS OSD to see why my Port Royal and other 3DMark scores suck now and noticed it doing that. You wouldn't need to do that. And even if you did do that, you can just turn it off in the bios. and continue to run CSM. Just now, Mr. Fox said: I did not know that Inspector and Profile Inspector were recently updated. Thanks for mentioning it. I just downloaded both and will check it out. It works with older versions as well I think...you are only changing 3 profiles in there from 0 to 1 basically which enables rebar in those profiles. 1 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 Just now, Talon said: his guy does a pretty good job of explaining how to enable it. I've tested in both Superposition and Port Royal and both produced increased performance. Green Goblin holding out. Just now, Talon said: This guy does a pretty good job of explaining how to enable it. I've tested in both Superposition and Port Royal and both produced increased performance. Green Goblin holding out. That's nice. Thank you. 🙂 Yeah, that Green Goblin often makes AMD look like something that might be interesting, but I don't think I am that I am anywhere near that desperate yet. 1 1 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 Darn it. Something seems bugged with it. Profile Inspector crashes at launch, and if select "Continue" the unknown features button is grayed out. Maybe it is because I don't have the Rebar vBIOS installed? Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 18 minutes ago, Mr. Fox said: Darn it. Something seems bugged with it. Profile Inspector crashes as launch, and if select "Continue" the unknown features button it grayed out. Maybe it is because I don't have the Rebar vBIOS installed? What version is that? Edit: I ran it without having Rebar vbios as well. Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 2 minutes ago, johnksss said: What version is that? Edit: I ran it without having Rebar vbios as well. It's this one. I think the latest version. Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 6 minutes ago, Mr. Fox said: It's this one. I think the latest version. https://github.com/Orbmu2k/nvidiaProfileInspector/releases You need the profile inspector 2 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 Just now, johnksss said: https://github.com/Orbmu2k/nvidiaProfileInspector/releases You need the profile inspector That did it. I guess the latest version with DWM is the problem. Thank you. 1 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 Just now, Mr. Fox said: That did it. I guess the latest version with DWM is the problem Yeah, dead man walking might need to keep on walking and leave well enough alone. LOL j/k 2 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
Mr. Fox Posted April 10, 2022 Author Share Posted April 10, 2022 OK, the BIOS and vBIOS changes didn't break my Linux installation, so that is good. 2 Wraith // Z790 Apex | 14900KS | 4090 Suprim X+Byksi Block | 48GB DDR5-8600 | Toughpower GF3 1650W | MO-RA3 360 | Hailea HC-500A || O11D XL EVO Banshee // Z790 Apex Encore | 14900KF | 4090 Gaming OC+Alphacool Block | 48GB DDR5-8600 | RM1200x SHIFT | XT45 1080 Nova || Antec C8 Spectre // Z790i Edge | 13900KS | 3090 Ti FTW3 | 32GB DDR5-8200 | RM1000e | EK Nucleus CR360 Direct Die || Prime A21 Raptor // Z690 PG Velocita | 13900KS | 2080 Ti | 32GB DDR5-6400 | RM1200x SHIFT | EK Nucleus CR360 Dark || Praxis Wetbench Half-Breed // Dell Precision 7720 | BGA CPU Filth+MXM Quadro P5000 | 4K Display | Sub-$500 Grade A Refurb | Nothing to Write Home About Mr. Fox YouTube Channel | Mr. Fox @ HWBOT The average response time for a 911 call is 10 minutes. The response time of a .357 is 1400 feet per second. Link to comment Share on other sites More sharing options...
johnksss Posted April 10, 2022 Share Posted April 10, 2022 5 minutes ago, Mr. Fox said: OK, the BIOS and vBIOS changes didn't break my Linux installation, so that is good. No problem, you are most welcome. 2 Maximus Z890 Apex ~ 265K ~ MSI 4090 Suprim X ~ G.Skill Trident Z5 8400 Mhz ~ 4TB Samsung 990 Pro ~ MSI-Ai1300P PSU ~ MAG 321URX QD-OLED 32" ~ AACH100HP Water Chiller ~ Praxis Wet Bench Flat MSI MEG X570S Unify-X MAX ~ 5950X ~ GTX 1070 ~ G.Skill 3200 Mhz ~ 500GB Samsung 980 Pro ~ Lian Li O11 Dynamic EVO Tempered Glass ~ Thermaltake 650W ~ Hwbot Profile Link to comment Share on other sites More sharing options...
ryan Posted April 10, 2022 Share Posted April 10, 2022 kind of ironic, all this talk about resizable bar and forcing it in nvidia inspector. So I downloaded nvidia inspector to check everything out and noticed I was holding higher clocks with it, im not sure how to get resizeable bar, but my new highest port royal below, and I honestly never thought id beat 5200, and if it was a timespy run Im sure it would be my top score also probably around 9100-9200. back again.. yuppers broke 9100 gpu with nvidia inspector, not sure why but I get better results with it over msi afterburner. 3 1 ZEUS-COMING SOON Omen 16 2021 Zenbook 14 oled Vivobook 15x oled Link to comment Share on other sites More sharing options...
electrosoft Posted April 10, 2022 Share Posted April 10, 2022 8 hours ago, johnksss said: Okay, I had it running at 4.9 Ghz for some reason, but I guess that did not matter as it's still the same running at 5.1 Ghz I must be doing it wrong..... Edit: When chip is colder it reads SP99 113/72 That is a pretty righteous SP98 12900k. It's a wonderful feeling when you pull a chip off the shelf and it is a good bin. Do you have a shot of the V/F curve? 1.101 @ 5.1 under load @ 1.288 adaptive? See how it does with Falk's binning baseline: Set your chip to the following: 5.4 ghz sync all cores (P cores: 5.4 ghz), E cores 4.0 ghz, Ring: 4.0 ghz Actual VRM Core Voltage: 1.42v (Bios set). LLC: Level 6 (I'm assuming you have an Asus board). Run Cinebench R23 10 times loop. If it passes, run R15 10 times in a row as fast as possible. 1 Electrosoft Prime: SP109 14900KS | Asrock Z790i Lightning | MSI Suprim X Liquid 4090 | AC LF II 420 | TG 2x16GB 8200 | Samsung 990 Pro 2TB | EVGA 1600w P2 | Phanteks Ethroo Pro | Alienware AW3225QF 32" OLED Heath: i9-12900k | EVGA CLC 280 | Asus Strix Z690 D4 | Asus Strix 3080 | 32GB DDR4 2x16GB B-Die 4000 | WD Black SN850 512GB | EVGA DG-77 | Samsung G7 32" 144hz 32" My for sale items on eBay. Link to comment Share on other sites More sharing options...
electrosoft Posted April 10, 2022 Share Posted April 10, 2022 8 hours ago, Mr. Fox said: Yes it does. LEDs can generate quick a bit of added warmth. I have MSI's UWP Control Center feces install on my W11 feces OS so I can turn it off with the trash software. (Since it is garbage, I use W11 for garbage collection for things exactly like that. Then I don't have to worry about my W10 getting digital cancer.) 100%. If there was a way to turn it off in the BIOS or without installing UWP Store trash software, I wouldn't loathe it so vehemently. I will give Asrock motherboards props on this. Not only can you turn RGB off in BIOS but they include a version of their RGB control software in BIOS for setting your lighting right then and there. I noticed it when I was building out the mATX B660M system with their Pro RS board. I updated the wife's system and I noticed MSI has overhauled their software suite and it is bigger and more intrusive than ever. Bad form MSI. 2 1 Electrosoft Prime: SP109 14900KS | Asrock Z790i Lightning | MSI Suprim X Liquid 4090 | AC LF II 420 | TG 2x16GB 8200 | Samsung 990 Pro 2TB | EVGA 1600w P2 | Phanteks Ethroo Pro | Alienware AW3225QF 32" OLED Heath: i9-12900k | EVGA CLC 280 | Asus Strix Z690 D4 | Asus Strix 3080 | 32GB DDR4 2x16GB B-Die 4000 | WD Black SN850 512GB | EVGA DG-77 | Samsung G7 32" 144hz 32" My for sale items on eBay. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now