SuperMG Posted 4 hours ago Posted 4 hours ago 2 hours ago, JadeRover said: It depends if you have the 1 or the 2 motherboard. - LA-9771P is a "dual LVDS + eDP motherboard", just like m6700 except that it has both signals on one connector, I talked previously on how to upgrade a LA-9771P motherboard to a "full" eDP motherboard (requires the correct cable "QHD lvds" + soldering an easy 4 pin jst "fan like" connector to the motherboard) -> This version has NO MUX SWITCH between MXM slot and display. See the block diagram that shows this : The limit to bandwidth is signal integrity on the motherboard so 4K 100Hz+ should be doable, like on m6700 posts about 4K 105Hz on 51nb. - LA-9772P is an "only eDP motherboard", like precision 7x10 and 7x20, to upgrade to 4k you just need the correct "4K eDP" display cable. -> This version HAS A MUX SWITCH between MXM slot and display. See block diagram : It is the same mux switch as the Precision 7x10 and 7x20 so 4K at close to 100Hz possible as well just like @janepa showed. Alienware M17X R4 has a 4 lanes eDP 40 pins connection but it has 2 PS8321 MUX switches... @sliderfratold me he got like a 1440p 120Hz display to work there? We can bypass the two muxes with wires directly to the EDP connector but that's going to be hard to do physically.
JadeRover Posted 4 hours ago Posted 4 hours ago That's right ! The output of one feeds into the other, this strange design is because it has an HDMi input port that must also be muxed into the the internal LCD, the laptop technically has QUAD MUX switches in case the laptop has an eDP or LVDS display, 2 for each display type, what a crazy design. 1440p 120Hz is possible with the PS8321, it operates at max HBR1 speed to 2.7Ghz, whereas the precision 7x10/7x20's mux operates at max HBR2 speed to 5.4Ghz, double the bandwidth in theory, 1440p 120Hz must really be pushing it. 19 minutes ago, SuperMG said: We can bypass the two muxes with wires directly to the EDP connector but that's going to be hard to do physically. Yes possible but very hard, I am thinking of doing this on my Zbook 17 g2, it has the same mux and I would like to fit a 4K 120hz display, this project will be far in the future though. Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz | 1440p165hz (upgrad) Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS
SuperMG Posted 3 hours ago Posted 3 hours ago 1 hour ago, JadeRover said: That's right ! The output of one feeds into the other, this strange design is because it has an HDMi input port that must also be muxed into the the internal LCD, the laptop technically has QUAD MUX switches in case the laptop has an eDP or LVDS display, 2 for each display type, what a crazy design. 1440p 120Hz is possible with the PS8321, it operates at max HBR1 speed to 2.7Ghz, whereas the precision 7x10/7x20's mux operates at max HBR2 speed to 5.4Ghz, double the bandwidth in theory, 1440p 120Hz must really be pushing it. Yes possible but very hard, I am thinking of doing this on my Zbook 17 g2, it has the same mux and I would like to fit a 4K 120hz display, this project will be far in the future though. So the second one is like an override over the existing eDP/DP MXM signal? Because when you connect the HDMI IN, it displays the HDMI in contents on the edp screen but you need a driver to make that to work. What about the MAX switch from the WirelessHD? I got the WirelessHD to work with an RTX 3080 MXM. It can only do max 1080p 60p at 60GHz? Or can I push further to 1440p using Nvidia's output settings? Is the HDMI 1.4a limited at HBR1 speeds too? Possible for 1440p 75/100Hz?
JadeRover Posted 3 hours ago Posted 3 hours ago 25 minutes ago, SuperMG said: What about the MAX switch from the WirelessHD? I got the WirelessHD to work with an RTX 3080 MXM. It can only do max 1080p 60p at 60GHz? Or can I push further to 1440p using Nvidia's output settings? The MUX switch for the DMC (wireless Display) is the same model that is on the eDP connector so it can in theory do 1440p 165Hz or so (120Hz at least). However I think the bottleneck will be the wireless card and the transmission signal over distance, you can give it a try of course. 27 minutes ago, SuperMG said: Is the HDMI 1.4a limited at HBR1 speeds too? Possible for 1440p 75/100Hz? The HDMi is 2.25gbps so less than HBR1, maybe 1440p 60 Hz ? That's what the specs say, tbh I know more about DP/eDP than HDMi. 28 minutes ago, SuperMG said: So the second one is like an override over the existing eDP/DP MXM signal? Because when you connect the HDMI IN, it displays the HDMI in contents on the edp screen but you need a driver to make that to work. Yes, first the laptop selects between CPU and GPU for the "motherboard" signal -> get's fed into the second mux at the same time as the HDMi in -> get's sent to the display. So yes in a way it acts as an override. Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz | 1440p165hz (upgrad) Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now