Jump to content
NotebookTalk

Vladka76

Member
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

 Content Type 

Everything posted by Vladka76

  1. Vladka76
    Thank you very much!
  2. Vladka76
    Thank you for this idea, it sounds great and relatively simple! But... does the mobo's connector for the cable to the int. screen have all the necessary pins - including eDP? And modding in this case will consist of rearranging the stock cable contacts, right? (I have 8770w and a motherboard with two memory slots) 🙂 Better buy (again) 8770w. 😉 Yes, your future tutorial would be very useful, same as a pinout of modded ex-LVDS cable. Thank you! I'll be looking for it from time to time now. Improve your health and good luck with your improvements!
  3. Vladka76
    Thank you for good news for me! I have little experience in installing overclocker memory in laptops.
  4. Vladka76
    You are right, but the difficulty is how to force the CPU's memory controller to use higher memory frequencies. In mobo's for desktop, there is a BIOS memory settings for this. In this case, I assume that the respected TC used 2133 MHz modules, but with reprogrammed SPD's flash IC.
  5. Vladka76
    I completely agree with the above. You, Mashcar, are truly a guru of HP graphics stations. I admit that I also follow your posts on other technical forums. I wish you could enable integrated Intel graphics and Optimus technology. After all, this will allow (if I'm not mistaken) all owners of non-DC, non-FHD screens and LVDS cables to install video cards newer than Maxwell 2.0... 😉 Good luck in perfecting your custom coreboot! --- P.S. I would be extremely grateful if you could explain how DDR3 works at 2133 MHz on your 8570. Another mystery for me. 🙂
  6. Vladka76
    Thanks for the answer - I've already ordered the battery. 😉 Let's see what comes...
  7. Vladka76
    Hello! I'm an owner of 8770w with non-DC screen and new Quadro M3000M. Do you have any experience with slice Battery repacking (elements replacing)? On the 4pda.to you wrote: "8770w battery don't have *smarts*, only need to remember to disconnect from biggest +V to lowest (battery voltage drops in increments and BQ don't destroy itself), solder new ones and charge-discharge 2 times." Thanks to your firm confidence in these words - I did repack successfully my primary original (yea!) VH08XL - but this is not enough to me. I have an idea to buy a DEAD slice battery - BB09 (QK640AA) with 9 elements (3s-3p) - and do the same. 😉 What do you say about this? How likely is it that the words in the lot description, 'does not hold a charge', mean 'already locked BQ'? Thank you for attention.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use