Reciever

So payroll screwed up and I didn't get paid, had to sell my 3090 to keep the house running. That week was rolled over and treated as OT. Now I'm eyeballing the red devil 7900 xtx. Any reason I should avoid?

That has more to do with using lvds VS the quadro I think. Haven't tested that personally as I used the 1060 and 1070. My temps stayed at 54c with max fan speed with the 5 heatpipe heatsink from ebay. Should be the yellow wire iirc. I used liquid metal once I was done testing, otherwise I used nth1 iirc

4940mx isnt worth the trouble, silicon lottery was poor for it, 4930mx will do fine. Also if you are using Compal EC via HWInfo64 to force max fan speed then you will lose the GPU fan as a result. I got around this by cutting the control wire and just let the fan run full speed. Otherwise you can alter the fan tables with an MX chip in the unlocked sBIOS iirc. A14+ is a good choice, though there are other options too. Some people install a simple on/off switch for when you want EC to control things and when you want to keep temps as low as possible. If you want to get the max performance from the CPU you will likely need to look at what digits to punch into the bios for forcing max power allowance (that can be later controlled via software if desired). There is also a means to "unlock" the haswell chips to behave like an MX chip as well. I believe there is a thread on the forums for that topic. For best input lag I would recommend PEG mode instead of SG. Happy trials, I had a lot of fun experimenting on my Ranger back when I had it :) Also you signature is way to large, please reduce its footprint to 8 lines.

Didnt know, I use a clear case for my 7 Pro and attach what I want to that, for now a magnet for my car mount. The Texas heat would just make a mess of most adhesives so applying directly to the phone seemed like a non starter.

No heat applied before removal?

Enough of the political discourse. Thanks

Welcome to the Forums!

@Developer79 please dot not triple post. Thanks

You are welcome to PM me. Content removed and warnings issued.

It was necessary to keep the thread open.

Welcome to the Forums!

There will be changes that also occur over time as well. Its not as if the current layout is set in stone never to change. There are a few things I am aiming to achieve though now we have a testbed thanks to Hiew's efforts. Not if some of them are possible but we'll how it goes. The forum wont be going anywhere :) Im looking forward to what we can do with this forum and the community that I cherish

I have seen this instance (not aware of the previously mentioned thread off the top of my head) and have thinking on it for a little while. While there was certainly quite a bit of excitement surrounding the LGA + MXM aspects of mobile tech, its EOL use cases arent the reason we created this forum. We created the forum because I wanted to stay in touch with as many members of NBR who were active as well as try to maintain the culture that the forum had. There will be some changes that will be required of its members to acknowledge which will irritate some Im sure but it will diversify the content which will allow the forum to show up on more searches. While members like @Mr. Fox and @Papusan are very vocal about their positions you also have quite a bit more members like @jaybee83 and @electrosoft who are much more mild in their approaches. Both are perfectly viable and welcome! There isnt an inherit limitation on the forum to only have dialogue surrounding laptops. If there is any topics that you may want to bring to the table but unsure if its permissible there isnt any reason to not reach out to me. At the moment we are working on some things in the backend so we can test some of things we have been pondering about for a while, Im hoping that this will bear fruit for those interested in the near future.

Doesnt even have QMK, which is largely seen as one of the larger developments for keyboard products.

It appears the number of optimizations, filters and bans issued have in large part resolved the issue of unresponsive forum and/or lackluster performance. Thanks everyone for your patience and happy posting! Chris

Good Evening Everyone! We have made progress in regaining much of the responsiveness in the forum. At this time there is still the semi-regular hitch where the forum becomes unresponsive however it does not appear to be every action much like what we were seeing from earlier today. It is also recovering much quicker as well, though more actions are being made in regards to that as well. Thank You everyone for your patience while we sort this out. Chris

Welcome to the Forums! Happy to have ya

Good Afternoon NBT! There appears to be an issue with our backend which is causing abnormally high loading times and generally making the forum unresponsive. We are aware of this issue and are attempting to diagnose. For now the behavior is a bit unpredictable where you may have snappy responsiveness for a few tabs then goes back to nearly unresponsive. I will report back when I have more information to share, apologies and appreciate your patience. Chris

You can edit that content into your post.

This thread has run its course. Thanks

Virtual Sandbox to do anything and everything you want with it. IT Training typically, can use it for Plex/JellyFin, remote game streaming, self-host all the things. Imagination and to some degree, budget, are the only limitations.

Please look over the Marketplace Rules when posting here. Thanks!

Very true, I did sooth my heart at some point with an LG C2 (open box) so Im not losing any sleep. I just dont like sending things to a landfill if it cant be helped :)

Sorry was also tied up with work. Nah I didn't find the part that I suspected was the issue for a reasonable price. I believe it was binned by my family when they re-organized the garage. Was a little bummed but they needed the space for something else. After not finding the part I was thinking of just getting a controller board in a similar manner like people do when salvaging a laptop panel but again the family binned it :(

It was a feature that I didnt even have to request, as Hiew is of the same thought process. We did toy with a couple of other themes and just kind of stuck with the 2-3 up til now. In other news, I have put in my notice with work. Lets just say things spiraled into an untenable scenario that was wildly outside of what could be justified under the current wage. While I will be acquiring a skill or two in the interim to update my resume between employment, I will have the time needed to work on a few things here that have long been on my mind.