Csupati

Hi, does it have the 3d emitter? maybe interested in the complete display unit.

Hi, ive sucsessfully modded my Notepal U3 , with 3 120mm fans, a power supply , a box for the couplings, and a switch on the box. So far, At idle the gpu is 32-33C, Cpu is around 45-50 C , the laptop fans are not spinning at all. At load ( tryed Heaven benchmark) Cpu goes up to 65C and gpu is around 50C , the gpu fans still not spinning cuz its not reaching 55C . At this point i didnt want to cut the frame of the cooler for better airflow , because its cooling enough the laptop. Tested with an Alienware 17, 4900mq and a p3200 mxm (80W) 1544 boost , its only perfCap on power limit.

Maybe im gonna try the m6700/6800 3k screen.

Hi, i have the m17x r5 / 17 r1 4.gen cpu , now currently im using a p3200 in it with 60hz optimus,  no issues here. Try another section for it as you go trough the nvdmi inf file  ( im only modified that one) you can see different section for different hrdwr id. I hope  that will help for You.

Thanks for the fast reply, i suggest that theres no other way . Finally my p3200 arrived,  its working in optimus , no issues ! And got some Hyper x 2133 mhz cl11 32gb kitsfor it as well.

Hi , Ive already upgraded my Ranger with a quadro P3000 lvds screen and optimus, so it works in there without any problem. I did order a P3200 to it and its on his way, im gonna share the upgrade, but now my question is that i can see the 120hz screen upgrade. As i see its needs the lcd cable that is edp but its 40 pin (kinda confusing to me after the p370sm3 with 50pin ) and the screen that is 120hz and (discontinued) 3d feature. If i buy a normal edp 40 pin screen witch is ips but not 120hz and 3d it will work?

Thats a quadro layout its gonna work , this is the zotac card , its similar to gecube eurocom : 

Your welcome , haha same was here, m6800 with 980m, m6700 with 970m, i was able to get an s7100x work in a clevo p370sm3 as a secondary card with a 1060 in the main slot. Recently sold my k5100m and 765m from the m6800/Alienware  . Now im gonna try a zotac 1070 but as i heard i will loose bios fan controll due to the zotac gpu thermistor incompatibilty . in clevos its goes emergency mode and beeps /auto shut down. I prefer the m6700 over the m6800 cuz of its gpu cooler, 2 heatpipes vs 3 heatpipes.

Theres the google drive link for all 3 vbios, ive asked it from someone who already did an m6800 p3000 then later and p5000 upgrade . p4000 are included as well . Dell Precision M6800.rar - Google Drive

thers the link for it : Solved: Dell Precision M6800 & QUADRO P4000 (VBIOS update) - Dell Community

theres vbios for the p5000 for m6700/6800 VGA Bios Collection: Dell Quadro P5000 16 GB | TechPowerUp

im gonna try to dig up that thread for you. Edit: just realized i already asked for that vbios for the p3000 , and i have it somewhere .

Btw , i have remember that if i buyed the m6700/6800 instead of the AW17 , theres needed to flash an early/ES vbios to it to run in windows cuz you will get error at os standup. in bios and linux theres no promlem at all with it.

Thats why im asking if there was any sucsessfull mods . Im rather not flash if its not confimed yet, hard to find mxm cards at my region, I can only order them from ebay . Im happy with the performance compared to the heat generated at now on full hd 60hz lvds display.

No not yet , it has the 86.04.38.00.04 vbios, i get the card with this vbios , and I didnt flashed it. 

Hi! , Im wondering about to oc my p3000 a litle bit. Its in an Alienware 17 haswell , and its performing very well in thermal side. Almost not spinning the fans and 60C on the card at full load . Now its max boost is around 1240mhz and stay there at full time, no drop and no throtling either. It was tested in valley benchmark endless mode prox. 20 mins of run.

Alienware 17 R1 work with quadro P3000, stock A08 bios , and lvds screen optimus on, Zbook 17 G3 works with the same P3000(spec unknown)

Nice mod! Amd still kept refreshing his drivers to this card? And is it worth the more pwr consume rather than changing the card to a newer or stronger mxm card? Btw the m6100 is a very cool card, in my Dell m6700 with 3720qm its maxed around 50C with almost not spinning fans, or the M6700 has good colling solution cuz the 980m and 970m was cooler, and has significantly lower fan noise compared to a clevo p370sm3 . 

Hi, ive  had a ranger(haswell) laptop with 75 W two pipe heatsink, i found locally a 100w 3 pipe heatsink but its from an m17x r3/r4 , they are compatible or not? The 2 pipe heatsink  can handle the p3000 , but i want to make sure it has enough cooling capacity. 

Finally today arrived the p3000 , pair with intel hd in optimus the card work A08 stock bios and lvds

After a fresh win 10 install,  still showing 100% fan at gpu z , but the bios  is handle them  correctly.

NVM if i put load on it its working as it shoud be boosting to 901 mhz instead of 863mhz in valley windowed

21 hours ago, Maxware79 said:

The P3000 should install just like a 10 series card. It will work best on the eDP display but it should also work fine on the LVDS display by piggybacking off the Intel graphics. You will usually find a small performance drop with this though. 

I haven't tried a P3000 myself so maybe someone else can confirm this. 

thank you, ive have some strange thing going on with the 765m pics attached, its idle. Maybe the laptop is turning off the dgpu or its somehow faulty? its claims that if the card is present the fans are going 100% but its not going .

They said after the hub  replace,  theres no shortage on the board , but i mentioned him that  theres maybe a blow fuse somewherein the power board,  we can  simply  connect  to the bios chip  with a cabled eeprom writer and flash it? Or need to be  replaced,  or desolder from the board and write it?

9 hours ago, ViktorV said:

ITE?

37 minutes ago, Csupati said:

Mobo upper side PCH chip.

Platform Controller Hub