*Official Benchmark Thread* - Post it here or it didn't happen :D

[electrosoft]

1 hour ago, Papusan said:

 

 

And many on OC.net spend more money in more expensive quality products than the normy pc users.

 

 

 

 

All I'm saying is the math isn't mathing....and luck is not at play in engineering fault tolerance testing.

 

Plus with the user reports all we have is their subjective takes ("I swear I checked everything right before going to church and feeding the homeless!") usually rife with oversights and human error we do not know or see. All we see is the end product which is a burned cable and/or fused connection. Then people run with it.....

 

If the connector was that flawed, those who routinely push their cards should suffer a much noticeable higher rate of failure yet amongst the enthusiasts on the forums the rate of failure is minuscule if even that.

 

I've long thought this since the 4000 series and it continues to prove itself out over and over. I frequent the various enthusiast forums, enthusiast FB tech message groups, tech focused Discord along with clans and guilds chock full of 4090 and 5090 owners gaming 8-12hrs/day and more waiting for this influx of burned connectors amongst the various types used considering how hard the hardware is being pushed even on non shunted cards running max OC's constantly hitting 600-650w....yet......much ado about nothing.

 

I ran my 4090 OC'd from start to finish. I am doing the same with my 5090 too. One thing I do for my cards since Ampere is I run them max Underclocked when not gaming/benching then Max OC when gaming.

 

Look, it's a cheap part to replace for the cable. I can swap in numerous types or models if I want. That isn't the issue. Zero loyalty to a damn connector cable 🤣 The one and only time I had issues was with the CM adapter cable  I was going to use and it kept black screening and crashing and it turned out to be severely problematic and was a legitimate issue even outside of human error or potential inherent problems. The replacement one they sent me is still sitting sealed in its pouch on my shelf. I am really curious about the Ampinel and am almost 100% I'll be picking one up just out of curiosity.

 

And you're correct, many on OC.net DO spend more money on quality products than normies. That just adds even more weight to my argument.

 

With all that being said, I still wish they had stuck with 8-pin PCIe connectors but I guess with the way power consumption is going, we would end up with cards with 4-5 of them if not more at some point on certain models.

 

Imagine a HOF with 8 8-pin connectors..... 🤣

 

 

 

 

 

 

[Reciever]

Picked up a MSi Gaming GTX 970 to match the one I have and EVGA GTX 760 SLI (Plus bridge) 

 

Just loading up more and more work for my Winter break this year. 

 

Cleaned up the EVGA 980Ti, Sapphire R9 390X, and 2x Galaxy GTX 580's (Accelero Xtreme)

 

Still have Sapphire R9 280X to clean up and GTX 9800 to assemble.

Have an offer sent for a pair of GTX 460's as well. Kind of limiting myself to 2-way SLI/XFire or Dual-GPU single PCB scenarios. It would be fun to do Quad-SLI GTX 9800 but I wouldnt have the space for it all.

[Papusan]

14 hours ago, electrosoft said:

With all that being said, I still wish they had stuck with 8-pin PCIe connectors but I guess with the way power consumption is going, we would end up with cards with 4-5 of them if not more at some point on certain models.

 

Imagine a HOF with 8 8-pin connectors..... 🤣

 

More stupidity on its way. Both Corsair and beQuiet start remove 8-pin PCIe connectors to the bare minimum. Even for the stronger 1500W models. Now with only 2x 8-pin PCIe for powering AMD and Intel GPUs (but only one available for the GPU if your modern MB need one of them). Nice. We may see AMD and Intel going the Nvidia route once next gen cards is out. 

 

Corsair introduces HXi-SHIFT power supplies

Corsair has introduced another new generation of power supplies with the HXi SHIFT series.

 

 

be quiet! Dark Power 14 power suppliesSemi-passive cooling also moves into the high-end

With improved cooling and a standstill fan for uncompromising quietness, be quiet! wants to return to its roots.

 

 

 

[Mr. Fox]

4 hours ago, Papusan said:

 

More stupidity on its way. Both Corsair and beQuiet start remove 8-pin PCIe connectors to the bare minimum. Even for the stronger 1500W models. Now with only 2x 8-pin PCIe for powering AMD and Intel GPUs (but only one available for the GPU if your modern MB need one of them). Nice. We may see AMD and Intel going the Nvidia route once next gen cards is out. 

 

Corsair introduces HXi-SHIFT power supplies

Corsair has introduced another new generation of power supplies with the HXi SHIFT series.

 

 

be quiet! Dark Power 14 power suppliesSemi-passive cooling also moves into the high-end

With improved cooling and a standstill fan for uncompromising quietness, be quiet! wants to return to its roots.

So dumb. It seems like so many things that are new are garbage. And, the minds of the idiots driving the new ideas are broken. Stupid people producing garbage products for stupid people. The new normal.

 

Maybe we will see prices go down for the "old" PSUs that were made the right way.

 

My Thermaltake GF3 1650W PSU has two 12VHPWR connections (and cables) and like six 8-pin PCIe connections (and cables), plus the two EPS connections (and cables). It is hard to find them now because silly people don't like it because it has a powerful fan that they can hear running under heavy stress and it runs for a few seconds after you turn off the computer in order to cool off the internals. They would prefer that the PSU cook itself in silence.

[Mr. Fox]

So, I am continuing to have odd behavior with the Apex that is unexplainable. Can run stable for many hours and then suddenly will not boot Windows any more without a BSOD or stops booting before the BIOS screen and stays stuck on random LED Q-codes. It ran perfectly all day long yesterday and I turned it off to go to bed. When I tried to turn it on this morning it was stopping during POST with a black screen. Resetting CMOS and then applying the saved BIOS profile, it began working normally again.

 

So, there is something wrong with it. Changing CPU, RAM and all attached storage does not seem to matter. I reopened the RMA for a refund and purchased a new replacement. It will be delivered Friday and I will return the original and wait for the refund.

 

And Brother @Hiew is the new owner of the amazing AORUS Master. It is being delivered to him today.

[Reciever]

39 minutes ago, Mr. Fox said:

So, I am continuing to have odd behavior with the Apex that is unexplainable. Can run stable for many hours and then suddenly will not boot Windows any more without a BSOD or stops booting before the BIOS screen and stays stuck on random LED Q-codes. It ran perfectly all day long yesterday and I turned it off to go to bed. When I tried to turn it on this morning it was stopping during POST with a black screen. Resetting CMOS and then applying the saved BIOS profile, it began working normally again.

 

So, there is something wrong with it. Changing CPU, RAM and all attached storage does not seem to matter. I reopened the RMA for a refund and purchased a new replacement. It will be delivered Friday and I will return the original and wait for the refund.

 

And Brother @Hiew is the new owner of the amazing AORUS Master. It is being delivered to him today.

He was like a kid window shopping at a candy store when we told him the details. I haven't spoken with him this week so I'll ping him and see if there were any complications. 

 

The worst thing right now is trying to refrain from building the pc until this weekend lol 

[Mr. Fox]

20 minutes ago, Reciever said:

He was like a kid window shopping at a candy store when we told him the details. I haven't spoken with him this week so I'll ping him and see if there were any complications. 

 

The worst thing right now is trying to refrain from building the pc until this weekend lol 

I probably would not even try to refrain. Sleep is optional when there are new parts to be installed. 🤣

 

UPS tried to deliver and he was not home so he will be picking it up from a UPS location probably later today.

[Reciever]

7 hours ago, Mr. Fox said:

I probably would not even try to refrain. Sleep is optional when there are new parts to be installed. 🤣

 

UPS tried to deliver and he was not home so he will be picking it up from a UPS location probably later today.

I do often tell people that they can sleep when their dead! But that doesn't mean much where I proudly proclaim sleep as my favorite activity. 

 

Looks like seller moved to a different buyer for the 460 SLI set, oh well 

[Raiderman]

Hello everyone, long time no speak. Been super busy with stuff. Today I was pondering windows 7 and was wondering if this was possible? Um not too familiar on the ins and outs of hardware documentation. 

I asked grok A.I. this question.

[Mr. Fox]

1 hour ago, Raiderman said:

Hello everyone, long time no speak. Been super busy with stuff. Today I was pondering windows 7 and was wondering if this was possible? Um not too familiar on the ins and outs of hardware documentation. 

I asked grok A.I. this question.

Hey brother. Hope all is well with you and your family.

That is a brilliant idea. I may have to look into that. I would love to be able to go back to Windows 7 and cannot due to lack of driver support.

[Papusan]

 

New one from MSI. I wonder how many cards have been returned back to MSI. Expect this will increase as the months going forwards. 

 

EDIT: Just to clarify, this is the yellow 12vhpwr MSI power adapter that came with the GPU. With my older power supply, it was either this adapter or a DIY power cable, and I mistakenly thought this adapter is "safer".

 

[Talon]

 

Sometimes I feel like I make the worst decisions. Found this card brand new from a small shop in Florida. 

[Mr. Fox]

50 minutes ago, Talon said:

 

Sometimes I feel like I make the worst decisions. Found this card brand new from a small shop in Florida. 

Nice. Great find. I hope you got a good deal on it. Is that a 4090 or 5090? Non-D model?

[Papusan]

2 hours ago, Talon said:

 

Sometimes I feel like I make the worst decisions. Found this card brand new from a small shop in Florida. 

 

Congrats bro. Both 4000 and 5000 series HOF have a nice clean design. Did you get the Galax XOC software?

 

It just works. Why change to the new and shiny if the old still works bro @Mr. Fox? 

 

LOL

 

[Talon]

1 hour ago, Mr. Fox said:

Nice. Great find. I hope you got a good deal on it. Is that a 4090 or 5090? Non-D model?

5090D is only Galax HOF available. Only 100 of these cards were made. I got it for about $800 over an Astral. Which in hind so hindsight is still a terrible deal lol. 
 

But at least it’s semi unlocked and can go to 36Gbps memory. 
 

21 minutes ago, Papusan said:

 

Congrats bro. Both 4000 and 5000 series HOF have a nice clean design. Did you get the Galax XOC software?

 

It just works. Why change to the new and shiny if the old still works bro @Mr. Fox? 

 

Can you DM me the Galax HOF software? I want to see if it works on 5090. 

[Mr. Fox]

51 minutes ago, Papusan said:

It just works. Why change to the new and shiny if the old still works bro @Mr. Fox? 

X3D is a joke. A popular one with the Team Red kiddos, but I don't like it and don't want a silly gimmick that needs to be babied in order to get it to work right and not blow up. It's also just too stupid that the dual CCD CPUs only have it on half the CPU.

[Papusan]

18 minutes ago, Mr. Fox said:

X3D is a joke. A popular one with the Team Red kiddos, but I don't like it and don't want a silly gimmick that needs to be babied in order to get it to work right and not blow up. It's also just too stupid that the dual CCD CPUs only have it on half the CPU.

 

Stupidity is the new normal. Of course some will blow up their gears if they get smart ideas from stupid people. 

 

 

 

@Talon PM'd

[Mr. Fox]

OK... got the Apex replacement. Seems good so far.

[Papusan]

7 hours ago, Mr. Fox said:

OK... got the Apex replacement. Seems good so far.

 

3rd the sharm ? Or a glitch aka suddenly works then back to the normal with overpriced trashware from Asus? But it looks good bro Fox🙂

 

13 hours ago, Mr. Fox said:

X3D is a joke. A popular one with the Team Red kiddos, but I don't like it and don't want a silly gimmick that needs to be babied in order to get it to work right and not blow up. It's also just too stupid that the dual CCD CPUs only have it on half the CPU.

 

If you enjoy memory overclocking then go for the cheapo package from AMD. Not sure you can enjoy +10000 MT/s with your expensive X3D package. 

 

G.SKILL DDR5 RAM overclocked to stable 10,600 MT/s using AMD Ryzen 5 8500G on ASUS B850 mobo

G.SKILL has announced that its team has pushed its DDR5 memory up to a MemTest stable 10,600 MT/s speeds, using the AMD Ryzen 5 8500G processor and based B850M motherboard from ASUS.

In a new post on X, G.SKILL announced its EXPO-rated DDR5-6000 CL26 48GB kit (2 x 24GB sticks) was used on an ASUS B850M AYW Gaming OC motherboard and AMD Ryzen 5 8500G processor, with the RAM overclocked to an insane 10,600 MT/s.

 

Interestingly, the ASUS B850M AYW Gaming OC motherboard is a mid-range motherboard that the company designed with overclocking in mind, but it's not in many markets yet. The test involved using standard cooling, no CPU configuration tweaks, and dual DIMMs... Normally for overclocking records on RAM, the CPU core configuration is changed, LN2 cooling is used, and a single DIMM is deployed. Not for this new stable record