Trov Posted April 14, 2022 Share Posted April 14, 2022 Hello, I wanted to share my success of upgrading an M4800's GPU to a Quadro T2000 I happened across a listing that was selling one for $180, which seems to be fairly cheap considering this is effectively an MXM A form factor GTX 1650. I was surprised it is offered in the MXM A size; as normally one would see a Quadro T1000 instead. This card is from I believe an HP Z2 Mini G5, and there is also a Quadro T1000 from the same machine, with the same non-standard board shape. More on that below. About The Card Not only is there a protrusion in the top right corner, it is slightly wider than a standard MXM A card by a couple mm. The back; unfortunately there are some SMD components blocking the "X" shaped attachment plate for the heatsink. I do not know how the heatsink attaches in the HP Z2 Mini; it must sit on some standoffs or something. Installation There are 3 concerns for installation: -The card being slightly wider -The top right protrusion -Components on the back blocking the possibility of an "X brace" heatsink attachment plate. Thankfully, nothing in the M4800's frame or screw posts blocks the card from being inserted. The only thing stopping it are the corners of the MXM slot intersecting with the T2000's wider body. The slot corners can easily be cut away with an exacto knife. This shouldn't pose much if any danger of damaging the MXM slot itself since you are just cutting plastic on a metal tab away from any of the connector pins. After cutting the corners of the slot, the card lowered down onto the screw posts. One should not worry about performing this permanent alteration; normal MXM cards will still slot in just fine after doing this. The next challenge is the corner protrusion. This doesn't cause any issue until you attempt to place the top bezel and keyboard back on. It turns out the speaker assembly would intersect with it. However, the part that intersects is just a hollow plastic chamber that can be cut away with an exacto knife without damaging the speaker itself. This may affect the sound quality but the sound quality was dire enough beforehand that I don't notice any meaningful difference. And lastly, the heatsink. Since there is no way to put the X-Brace on the back that the heatsink screws into, I had to use some nuts instead. Since there is no reinforcement on the back, I recommend avoiding tightening the 4 heatsink screws too tight. Also, you must install the heatsink before slotting in the GPU since you won't have much of a way to hold the nuts in place before screwing in. This means having to pull the whole motherboard out of the bottom case to insert the card, then putting it back. This isn't much extra work though, it's only a couple more screws than you already had out to get there in the first place. I had the Nvidia heatsink; it seems to be the correct distance for this card, I screwed the heatsink in without paste as a test and saw no daylight come through between the GPU die and the heatsink surface. VBIOS & Drivers I didn't need to touch the VBIOS. The laptop happily booted into Windows without any change (other than resetting CMOS) directly after putting in the T2000. The Nvidia installer would not detect the card. However, using Device Manager, selecting the GPU and selecting "Update Drivers" and then "Have Disk" and navigating to the Nvidia installer extraction folder and manually selecting the .inf worked. No changes were made to any .inf files. After a reboot Nvidia Control Panel was installed and the card was ready for running. Performance & Thermals On the desktop, the card idles at 43C, though I think Chrome was open with a good number of tabs. Here is Time Spy results, paired with i7-4900MQ: Conclusion The main downside is the card gets pretty hot at load, reaching 85C. After a few minutes of gaming, the M4800 will kick into maximum jet engine fan speed. It's not much of a wonder why, the card is rated as 60W TDP and the HP Z2 Mini's GPU heatsink is probably a good 2 or 3x the size of the GPU heatsink in the M4800. However, I did compare this thermal performance to my newer Precision 5540 that came with a T2000 built-in; and I noticed that laptop allows the GPU to go all the way up to 95C and thus the TimeSpy performance on that laptop throttled down to the 3100s. So, you might be able to get away with manually keeping your M4800 fans at Medium speed to keep the noise down at the cost of thermal throttling. It would be nice to be able to lower the power limit of the card to perhaps turn it into something akin to T2000 Max-Q, but unfortunately the VBIOS locks everything down, and MSI Afterburner cannot change any settings at all of this card. Therefore, the Quadro T1000 may be a better fit. I expect a T1000 from an HP Z2 Mini will work with all of the same steps as above, and stay below 70-75C according to a Youtube video I saw of someone putting a T1000 in his M4800. This HP T1000 may in the coming months be a far more accessible T1000 than the ADLINK ones that rarely pop up on Ebay. I did not test any external outputs; it is likely the GPU won't work in dedicated GPU mode. With Optimus mode, internal display works as you can see in the photos. This is quite a potent upgrade; games such as Doom Eternal run very well. This still isn't the end of the line for this laptop I suspect, as the RTX A2000 is being made in the MXM A form factor. In a few years those will probably be much more plentiful on the used market. 1 2 4 1 Link to comment Share on other sites More sharing options...
Aaron44126 Posted April 14, 2022 Share Posted April 14, 2022 On 4/14/2022 at 12:06 AM, Trov said: Hello, I wanted to share my success of upgrading an M4800's GPU to a Quadro T2000 Expand Amazing... Thank you for sharing. This is additional confirmation that Turing GPUs work fine in these machines, if you can find one (and get it to fit). Pascal GPUs tend to cause an ACPI-related BSOD at startup on M4800/M6800 and just hang up in the BIOS on M4700/M6700, unless you have a specific ES VBIOS that can be flashed on. I'll share these old posts regarding doing an INF mod to get the NVIDIA driver to load cleanly, if you are so inclined. https://www.nbrchive.net/forum.notebookreview.com/threads/precision-7530-precision-7730-owners-thread.820539/page-253.html#post-10937563 https://www.nbrchive.net/forum.notebookreview.com/threads/precision-m6700-gpu-upgrade-k5000m-to-m5000m.807061/page-3#post-10797664 1 1 Apple MacBook Pro 16-inch, 2023 (personal) • Dell Precision 7560 (work) • Full specs in spoiler block below Info posts (Windows) — Turbo boost toggle • The problem with Windows 11 • About Windows 10/11 LTSC Reveal hidden contents Apple MacBook Pro 16-inch, 2023 (personal) M2 Max 4 efficiency cores 8 performance cores 38-core Apple GPU 96GB LPDDR5-6400 8TB SSD macOS 15 "Sequoia" 16.2" 3456×2234 120 Hz mini-LED ProMotion display Wi-Fi 6E + Bluetooth 5.3 99.6Wh battery 1080p webcam Fingerprint reader Also — iPhone 12 Pro 512GB, Apple Watch Series 8 Dell Precision 7560 (work) Intel Xeon W-11955M ("Tiger Lake") 8×2.6 GHz base, 5.0 GHz turbo, hyperthreading ("Willow Cove") 64GB DDR4-3200 ECC NVIDIA RTX A2000 4GB Storage: 512GB system drive (Micron 2300) 4TB additional storage (Sabrent Rocket Q4) Windows 10 Enterprise LTSC 2021 15.6" 3940×2160 IPS display Intel Wi-Fi AX210 (Wi-Fi 6E + Bluetooth 5.3) 95Wh battery 720p IR webcam Fingerprint reader Previous Dell Precision 7770, 7530, 7510, M4800, M6700 Dell Latitude E6520 Dell Inspiron 1720, 5150 Dell Latitude CPi Link to comment Share on other sites More sharing options...
Reciever Posted April 14, 2022 Share Posted April 14, 2022 Interesting, I have a M6800 sitting in the garage that I have been slowly cleaning up. Might put the 4980hq back in it. Telegram / TS3 / Twitter 2700X to 5800X3D upgrade! With a 10850K cameo! Link to comment Share on other sites More sharing options...
Trov Posted April 16, 2022 Author Share Posted April 16, 2022 I figure an M6800 would cope with the thermals a lot better since the heatsinks have a lot more heatpipes going around. Link to comment Share on other sites More sharing options...
MELOCODI Posted November 11, 2022 Share Posted November 11, 2022 Where did you get it? DELL Precision M4800 Slav-jank Reveal hidden contents GPU: NVIDIA Quadro T1000 CPU: i7 4980HQ (Undervolted) RAM: 16 GB G.Skill RipJaws 1866 mHz (2 x 8 GB) Storage (SATA1): Samsung SSD 870 EVO 512 GB Storage (SATA2): Samsung SSD 870 EVO 1024 GB Link to comment Share on other sites More sharing options...
aldarxt Posted November 18, 2022 Share Posted November 18, 2022 Hey @Trov I think you might be the first M4800 to score with a T2000 and G3 socket!! Go post your score on 3DMark!!! 1 Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080 Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000 Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D Precision m6700 i7-3840QM-16GB DDR3-GTX 970M Precision m4700 i7-3840QM-16GB DDR3-T2000M HP ZBook 17 G6 i7 9850H-32GB DDR4-RTX4000maxQ GOBOXX SLM G2721-i7-10875H RTX 3000-32GB ddr4 Link to comment Share on other sites More sharing options...
burntstew Posted November 27, 2022 Share Posted November 27, 2022 Impressive. Glad i decided to check in here i was under the impression that MXM A was functionally dead with the best gpu available being m2200's and the occasional 1050. Link to comment Share on other sites More sharing options...
mtx261 Posted July 11, 2023 Share Posted July 11, 2023 Very interested in seeing if I can get this working as well. I managed to find a Quadro T2000 for $75 on eBay, so we'll see how it goes. I have two M4800s, so I'll see if I can compare the performance of them too. 1 Link to comment Share on other sites More sharing options...
mtx261 Posted July 12, 2023 Share Posted July 12, 2023 It worked! I did the exact modifications OP did to the MXM slot. Laptop booted, installed drivers, and even ran some games without issue. Interestingly, my T2000 reports as a T2000 Max-Q, a lower-powered variant with a 40 watt TDP (lower then the 60w R9 M270x it's replacing). Temps seemed quite good despite the cooler not being mounted properly at all (need to get nuts for cooler). The 4700MQ in my system seems to be a great match for it too. You might get more power with an older gaming laptop GPU, but I think this provides plenty of performance while also being power efficient and not requiring any weird software hacks to get working. Now I just need to put everything back together... 1 Link to comment Share on other sites More sharing options...
lukethewierdo Posted December 17, 2023 Share Posted December 17, 2023 Hey I'm a little late to this topic but I recently put the HP T1000 gpu in an M4800 and followed the exact steps by Trov and found them very helpful thank you much. but a note on the drivers I found that I did not have to manually install the drivers or mod them in any way, I just used the ones listed on HP's website for the Z2 Mini G5 and they worked fine, I have no idea if they will work for everyone but they did for me, so I thought I would put that out there. thank you again 4 Link to comment Share on other sites More sharing options...
aldarxt Posted January 15 Share Posted January 15 On 4/14/2022 at 2:15 AM, Aaron44126 said: Amazing... Thank you for sharing. This is additional confirmation that Turing GPUs work fine in these machines, if you can find one (and get it to fit). Pascal GPUs tend to cause an ACPI-related BSOD at startup on M4800/M6800 and just hang up in the BIOS on M4700/M6700, unless you have a specific ES VBIOS that can be flashed on. I'll share these old posts regarding doing an INF mod to get the NVIDIA driver to load cleanly, if you are so inclined. https://www.nbrchive.net/forum.notebookreview.com/threads/precision-7530-precision-7730-owners-thread.820539/page-253.html#post-10937563 https://www.nbrchive.net/forum.notebookreview.com/threads/precision-m6700-gpu-upgrade-k5000m-to-m5000m.807061/page-3#post-10797664 Expand So the easiest upgrade for a M4700 would be a GTX 1050TI, sticking with Pascal, would be a nice upgrade for it, what do you think? Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080 Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000 Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D Precision m6700 i7-3840QM-16GB DDR3-GTX 970M Precision m4700 i7-3840QM-16GB DDR3-T2000M HP ZBook 17 G6 i7 9850H-32GB DDR4-RTX4000maxQ GOBOXX SLM G2721-i7-10875H RTX 3000-32GB ddr4 Link to comment Share on other sites More sharing options...
Aaron44126 Posted January 15 Share Posted January 15 On 1/15/2024 at 5:01 PM, aldarxt said: So the easiest upgrade for a M4700 would be a GTX 1050TI, sticking with Pascal, would be a nice upgrade for it, what do you think? Expand See my post above on Pascal GPUs (GTX 1050Ti is Pascal, I believe...). It will not work. With M4700/M6700 you will get a lock-up at boot and with M4800/M6800 you will get a BSOD from acpi.sys (but Linux will work). 1 1 Apple MacBook Pro 16-inch, 2023 (personal) • Dell Precision 7560 (work) • Full specs in spoiler block below Info posts (Windows) — Turbo boost toggle • The problem with Windows 11 • About Windows 10/11 LTSC Reveal hidden contents Apple MacBook Pro 16-inch, 2023 (personal) M2 Max 4 efficiency cores 8 performance cores 38-core Apple GPU 96GB LPDDR5-6400 8TB SSD macOS 15 "Sequoia" 16.2" 3456×2234 120 Hz mini-LED ProMotion display Wi-Fi 6E + Bluetooth 5.3 99.6Wh battery 1080p webcam Fingerprint reader Also — iPhone 12 Pro 512GB, Apple Watch Series 8 Dell Precision 7560 (work) Intel Xeon W-11955M ("Tiger Lake") 8×2.6 GHz base, 5.0 GHz turbo, hyperthreading ("Willow Cove") 64GB DDR4-3200 ECC NVIDIA RTX A2000 4GB Storage: 512GB system drive (Micron 2300) 4TB additional storage (Sabrent Rocket Q4) Windows 10 Enterprise LTSC 2021 15.6" 3940×2160 IPS display Intel Wi-Fi AX210 (Wi-Fi 6E + Bluetooth 5.3) 95Wh battery 720p IR webcam Fingerprint reader Previous Dell Precision 7770, 7530, 7510, M4800, M6700 Dell Latitude E6520 Dell Inspiron 1720, 5150 Dell Latitude CPi Link to comment Share on other sites More sharing options...
nforce4max Posted January 16 Share Posted January 16 On 1/15/2024 at 5:01 PM, aldarxt said: So the easiest upgrade for a M4700 would be a GTX 1050TI, sticking with Pascal, would be a nice upgrade for it, what do you think? Expand Much rather just toss in a Quadro M2200 for low effort or a Quadro T1000/T2000 with some effort. 1 Link to comment Share on other sites More sharing options...
Trov Posted February 18 Author Share Posted February 18 On 12/17/2023 at 3:15 AM, lukethewierdo said: Hey I'm a little late to this topic but I recently put the HP T1000 gpu in an M4800 and followed the exact steps by Trov and found them very helpful thank you much. Expand On 7/12/2023 at 1:51 PM, mtx261 said: Interestingly, my T2000 reports as a T2000 Max-Q, a lower-powered variant with a 40 watt TDP (lower then the 60w R9 M270x it's replacing). Temps seemed quite good despite the cooler not being mounted properly at all (need to get nuts for cooler). Expand How are you guys' temps & fan noise? Does the fan speed max out after a few minutes of a 3D game or does it stay at about mid level? I think that would make T2000 MaxQ or T1000 much more suitable. Do you have more details on your T2000 Max-Q card? Was it an HP card with the funny corner or something else? Link to comment Share on other sites More sharing options...
lukethewierdo Posted March 10 Share Posted March 10 Couldn't tell you exact numbers on noise but its not unbearable, and these are temps after running fur mark for a few min never gets this hot in game. draws more wattage than Max-q t2000 interestingly. Time spy scores with i7 4900MQ and T1000 if anyone wanted to compare to T2000. 1 Link to comment Share on other sites More sharing options...
Solarbreak Posted April 23 Share Posted April 23 I'm pretty new to this but I also have a M4800 and opted to install a GTX 1650 MXM gpu into mine. There were no modifications I needed to do to physically put the card in, but I did have to use NVcleanstall to install the drivers. I even have a video showing the card working if you type on Youtube "M4800 + GTX 1650 mod". The temps would get high but I was also able to thermal throttle it with an old Nvidia Powermizer program. My issue is whenever I reboot, sometime the driver will completely disappear and the GTX 1650 won't do anything. I can find the driver by showing hidden drivers but unless I reinstall windows I have to deal with this issue. Even if the laptop simply goes to sleep, this happens. How has everyone's experience been with the T1000 and T2000 long term? Link to comment Share on other sites More sharing options...
Reciever Posted April 23 Share Posted April 23 On 4/23/2024 at 3:16 PM, Solarbreak said: I'm pretty new to this but I also have a M4800 and opted to install a GTX 1650 MXM gpu into mine. There were no modifications I needed to do to physically put the card in, but I did have to use NVcleanstall to install the drivers. I even have a video showing the card working if you type on Youtube "M4800 + GTX 1650 mod". The temps would get high but I was also able to thermal throttle it with an old Nvidia Powermizer program. My issue is whenever I reboot, sometime the driver will completely disappear and the GTX 1650 won't do anything. I can find the driver by showing hidden drivers but unless I reinstall windows I have to deal with this issue. Even if the laptop simply goes to sleep, this happens. How has everyone's experience been with the T1000 and T2000 long term? Expand Sounds like Windows is trying to install what it thinks it needs. I believe you can disable automatic driver installation and see how it behaves. 1 Telegram / TS3 / Twitter 2700X to 5800X3D upgrade! With a 10850K cameo! Link to comment Share on other sites More sharing options...
Solarbreak Posted April 27 Share Posted April 27 On 4/23/2024 at 3:32 PM, Reciever said: Sounds like Windows is trying to install what it thinks it needs. I believe you can disable automatic driver installation and see how it behaves. Expand I wish that's all it was, but this also happens in Linux. In windows, the hidden driver put out an error code 45 when this happens. If I never install a driver, windows will just see the GTX 1650 as a basic display driver. Once I install a driver, it works great - until it goes to sleep or power cycles. This might help as well, but during the reboot the disk tray will make the usual sounds. I'm assuming it testing all devices prior to booting up, but when the GTX 1650 has a driver, the disk sound happens twice and then it's a hidden disconnected driver in windows (only happens once a driver is installed). I have backed up the original bios of this GTX 1650 and tested multiple bios options and many different drivers to make it work. I've only used NVcleanstall for the driver install process though. Link to comment Share on other sites More sharing options...
aldarxt Posted May 9 Share Posted May 9 @Trov, the T2000 was a great find, Installed in my M4700 and is running great. I snipped an X bracket for the nuts instead. Windows tried to install drivers but failed so I modded .inf for 522.22 and 3DMark 3 782 T2000 i7-3740QM 082H3V. Didn't have to remove the MOBO went in with heatsink attached surprisingly. Another Victory for MXM up gradable laptops 1 Clevo P870DM3-G i9-9900k-32.0GB 2667mhz-RTX3080+GTX1080 Alienware M18x R2 i7-3920xm-32GB DDR3-RTX 3000 Alienware M17x R4 i7-3940XM-16GB DDR3-RTX 3000 Alienware M17x R4 i7-3940XM 20GB DDR3-P4000 120hz 3D Precision m6700 i7-3840QM-16GB DDR3-GTX 970M Precision m4700 i7-3840QM-16GB DDR3-T2000M HP ZBook 17 G6 i7 9850H-32GB DDR4-RTX4000maxQ GOBOXX SLM G2721-i7-10875H RTX 3000-32GB ddr4 Link to comment Share on other sites More sharing options...
Per Astra Ad Deum Posted May 14 Share Posted May 14 Hey guys. I've recently installed an NVIDIA GTX 1050 Ti on my M4800. Works flawlessly, albeit flashing coreboot was necessary (boot process hangs with vendor firmware). So far I'm very happy with the card, safe for two issues: 1. I can neither read nor control voltage or power target 2. After 5-10 minutes of Gaming the card starts hitting 90°C and reacts by throttling. Any ideas on how to address these issues? I'd be happy for any advice. Link to comment Share on other sites More sharing options...
Zeht Posted May 14 Share Posted May 14 On 5/14/2024 at 7:40 PM, Per Astra Ad Deum said: Hey guys. I've recently installed an NVIDIA GTX 1050 Ti on my M4800. Works flawlessly, albeit flashing coreboot was necessary (boot process hangs with vendor firmware). So far I'm very happy with the card, safe for two issues: 1. I can neither read nor control voltage or power target 2. After 5-10 minutes of Gaming the card starts hitting 90°C and reacts by throttling. Any ideas on how to address these issues? I'd be happy for any advice. Expand You could try flashing a max-q vbios. To be safe make sure to enable nvidia optimus, just in case the card doesn't output video after flashing it. Link to comment Share on other sites More sharing options...
Per Astra Ad Deum Posted May 14 Share Posted May 14 Sounds reasonable. Can you provide a link to such a vBIOS? And could you elaborate on the Optimus part? I'm running coreboot and Arch Linux, so I guess there's no real option for that. Link to comment Share on other sites More sharing options...
Aaron44126 Posted May 15 Share Posted May 15 On 5/14/2024 at 9:36 PM, Per Astra Ad Deum said: And could you elaborate on the Optimus part? I'm running coreboot and Arch Linux, so I guess there's no real option for that. Expand That would be enabling graphics switching so that the Intel GPU drives the laptop built-in display. (No idea if Coreboot allows that in this system.) Also, back up your original vBIOS before flashing just in case. 1 Apple MacBook Pro 16-inch, 2023 (personal) • Dell Precision 7560 (work) • Full specs in spoiler block below Info posts (Windows) — Turbo boost toggle • The problem with Windows 11 • About Windows 10/11 LTSC Reveal hidden contents Apple MacBook Pro 16-inch, 2023 (personal) M2 Max 4 efficiency cores 8 performance cores 38-core Apple GPU 96GB LPDDR5-6400 8TB SSD macOS 15 "Sequoia" 16.2" 3456×2234 120 Hz mini-LED ProMotion display Wi-Fi 6E + Bluetooth 5.3 99.6Wh battery 1080p webcam Fingerprint reader Also — iPhone 12 Pro 512GB, Apple Watch Series 8 Dell Precision 7560 (work) Intel Xeon W-11955M ("Tiger Lake") 8×2.6 GHz base, 5.0 GHz turbo, hyperthreading ("Willow Cove") 64GB DDR4-3200 ECC NVIDIA RTX A2000 4GB Storage: 512GB system drive (Micron 2300) 4TB additional storage (Sabrent Rocket Q4) Windows 10 Enterprise LTSC 2021 15.6" 3940×2160 IPS display Intel Wi-Fi AX210 (Wi-Fi 6E + Bluetooth 5.3) 95Wh battery 720p IR webcam Fingerprint reader Previous Dell Precision 7770, 7530, 7510, M4800, M6700 Dell Latitude E6520 Dell Inspiron 1720, 5150 Dell Latitude CPi Link to comment Share on other sites More sharing options...
Per Astra Ad Deum Posted May 15 Share Posted May 15 Backing up my vBIOS worked with NVFLASH under Linux. However, I can't fine a suitable vBIOS! Neither for the preferred 1050 Ti Mobile Max-Q, nor for the regular 1050 Ti Mobile. The only one I was able to find was an unverified Dell 1050 Ti Mobile. This one was fitted with just two GB of RAM though. Mine has four 😞 If anyone knows where to to find a suitable vBIOS, please let me know! Link to comment Share on other sites More sharing options...
Zeht Posted May 16 Share Posted May 16 On 5/15/2024 at 9:54 PM, Per Astra Ad Deum said: Backing up my vBIOS worked with NVFLASH under Linux. However, I can't fine a suitable vBIOS! Neither for the preferred 1050 Ti Mobile Max-Q, nor for the regular 1050 Ti Mobile. The only one I was able to find was an unverified Dell 1050 Ti Mobile. This one was fitted with just two GB of RAM though. Mine has four 😞 If anyone knows where to to find a suitable vBIOS, please let me know! Expand I found one that allegedly comes from a Thinkpad X1 Extreme (source). Inspecting it with Pascal TDP Tweaker shows that its max power is 20W, which seems very low. You could try it and see how it performs, make sure to backup. nvidia.romFetching info... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now