Precision M6800 questions and upgrades

[SuperMG]

55 minutes ago, Annihilator said:

ok, putted the P5200 in n nothing happen, same issues like with the GTX 880M, not even shown in BIOS, full bios reset etc. done but nothing, the card getting power, heatsink was still warm as i opened the m6800 again....

 

edit: putted the m6100 back in to test, same issue... maybe mainboard broken? O_o 

Remove the CMOS battery, hold the power button for 30 seconds and then try again with the M6100.

[Annihilator]

4 hours ago, SuperMG said:

Remove the CMOS battery, hold the power button for 30 seconds and then try again with the M6100.

 

 

will try later, putted the P5200 in my 7720 n works flawless, just doin some benchmarks 🙂

 

no soo bad for totally unoptimized atm:

NVIDIA Quadro P5200 Grafikkarten Benchmark Resultat - Intel Core i7-7820HQ Processor,Dell Inc. 0F2JMF

 

[SuperMG]

On 2/15/2026 at 6:49 AM, DynamiteZerg said:

Any idea when the more expensive option would be out?

 

Update: The M6800 GPU heatsink I ordered from ebay has just arrived at my doorstep! Shipping sure is quick! But that's because I'm in Singapore and shipping from China only takes 1-2 days... 😆

It doesn't fit when I put the palmrest.......

 

Please help, I upgraded to an i7 4910mq, it doesn't work. There are 3 LEDS on the corner of the PC. 1 IS ON, 2ND IS BLINKING AND 3RD IS OFF.

 

Edit: it's a RAM module error but after swapping to an i7 4700MQ, all the RAM (4/4) are recognized...

Edited 10 hours ago by SuperMG

[Annihilator]

1 hour ago, SuperMG said:

It doesn't fit when I put the palmrest.......

 

Please help, I upgraded to an i7 4910mq, it doesn't work. There are 3 LEDS on the corner of the PC. 1 IS ON, 2ND IS BLINKING AND 3RD IS OFF.

 

Edit: it's a RAM module error but after swapping to an i7 4700MQ, all the RAM (4/4) are recognized...

 

4x 8GB?

 

maybe the IMC of the 4700 has a better bin then the one from the 4910. do u tried only 2 modules or 4x4GB? possible the IMC from the 4910 has probs with 4x dual-rank(8GB) modules

[SuperMG]

1 hour ago, Annihilator said:

 

4x 8GB?

 

maybe the IMC of the 4700 has a better bin then the one from the 4910. do u tried only 2 modules or 4x4GB? possible the IMC from the 4910 has probs with 4x dual-rank(8GB) modules

I tested with everything, 1R8, 2R8. It doesn't like dual channel... Waited for nothing and 35€ gone 😞

 

The heatsink: max 83C core temp, stable TDP (no 40W TDP bug). 150W then 130W then 120W (because of thermal throttling). I didn't use PTM7950 yet and the fan area wasn't really open for intake. Sadly the palmrest won't close because of the heatsink....

[Annihilator]

1 hour ago, SuperMG said:

I tested with everything, 1R8, 2R8. It doesn't like dual channel... Waited for nothing and 35€ gone 😞

 

The heatsink: max 83C core temp, stable TDP (no 40W TDP bug). 150W then 130W then 120W (because of thermal throttling). I didn't use PTM7950 yet and the fan area wasn't really open for intake. Sadly the palmrest won't close because of the heatsink....

 

3rd heatpipe too much?

 

[SuperMG]

Just now, Annihilator said:

 

3rd heatpipe too much?

 

No, it's maybe the thickness of it but it's the same thickness as the OEM one, mmmh. 

[Annihilator]

29 minutes ago, SuperMG said:

No, it's maybe the thickness of it but it's the same thickness as the OEM one, mmmh. 

 

strange

 

n think i only need a new heatsink in the 7720 when i would put an RTX card in bcs temps r really good(P5200 @ 110W max. 59°c. CPU max. 73°c. at 26°c. ambient temp. - used arctic mx-7 for both)

[AaronD]

On 2/5/2026 at 11:15 PM, DynamiteZerg said:

 

You can get the BE200HMW, it works directly in our usual WLAN card slot without having to go through any adaptor. It supports WIFI 7 and Bluetooth v5.4.

 

I have one on my M6800!

Just got one of those for my M6800, without antennas, because I really didn't want to take the screen apart too, to swap them out, and now I'm having some problems.

https://www.amazon.com/8774Mbps-Gigabit-Interface-Bluetooth-BE200HMW/dp/B0DNZS761K?th=1

 

Ubuntu Studio 24.04 LTS booted right up with the new card, but it didn't see any WiFi at all.  lspci says:

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4)
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d4)
00:1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GP104GLM [Quadro P5000 Mobile] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GP104 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Intel Corporation Wi-Fi 7(802.11be) AX1775*/AX1790*/BE20*/BE401/BE1750* 2x2 (rev 1a)
11:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)

 

I swapped back to the old card, and it wouldn't boot.  Got stuck on the second Ubuntu Studio splash screen, after auto-login, for loading the user's settings.  Same with no card, and even with the new card again!  It was rock-solid reliable before!  The BIOS says with the new card:

 

I finally got it to boot again, with the new card, though I don't know how or why.  Didn't change anything.  And I still don't have WiFi.  Fortunately, my home dock is wired, and that still works, but I do need WiFi when I take it places.

 

Any ideas?