Kyser777 Posted December 27, 2024 Share Posted December 27, 2024 27 minutes ago, Kyser777 said: my p870 (KM version) with 128GB of Ram can not boot I got PCI RESOURCES ERROR!!!!! error: insufficient PCI resources detected!!!! however it works fine with 96GB of ram (3x 32gb) or less my bios is the latest danske 128GB I heard a problem on the forum with thunderbolt and 128GB , is it related?? any FIX??? I made test when thunderbolt is disable in the BIOS , I can boot.... Why?? Link to comment Share on other sites More sharing options...
1610ftw Posted December 27, 2024 Share Posted December 27, 2024 2 hours ago, Kyser777 said: I made test when thunderbolt is disable in the BIOS , I can boot.... Why?? I am pretty sure that you can just skip by that screen at least that is what i recall from my 128GB bios in the P775TM. In any case the P870 offers a huge amount of connectivity and two GPU slots so at some point something has got to give. 2 x GPUs 2 x DP, 1 x HDMI, TB and 5 drive slots use a lot of bandwidth... Link to comment Share on other sites More sharing options...
Kyser777 Posted December 28, 2024 Share Posted December 28, 2024 impossible to run away from the bios error message with 128GB of ram and thunderbolt enable I had to reduce the ram amount to keep the thunderbolt function... ------ BTW, nowadays my bios setting is resetting after some inactivity time (few hours), I changed the cmos battery with a new one under the keyboard, but the problem persist... what should be the voltage on the cmos battery to keep the setting?? is there any jumper for the cmos?? I hope I did not short something with the water-cooling system. any tips to diagnostic the problem? Link to comment Share on other sites More sharing options...
Kyser777 Posted January 8 Share Posted January 8 it seems that the bios reset itself when the laptop can not boot after several time, can someone else confirm? Link to comment Share on other sites More sharing options...
Developer79 Posted January 17 Share Posted January 17 Hi all, I'm thinking of doing a test with the latest RTX50xx generation in the P870xx. Would you be interested in that too!? Greetz 2 Link to comment Share on other sites More sharing options...
Maro97 Posted January 17 Share Posted January 17 yes of course 🙂 Link to comment Share on other sites More sharing options...
Developer79 Posted February 3 Share Posted February 3 Hi, the RTX5070ti FE and the PCB look very good! Let's see how it fits into the P870xx! I'll be in touch... 1 Link to comment Share on other sites More sharing options...
Maro97 Posted February 3 Share Posted February 3 Cool..😎 .. rtx 5070ti released ? Link to comment Share on other sites More sharing options...
Drammar09 Posted February 10 Share Posted February 10 @Developer79 I have a stock P870TM1 with the i7-8086K and SLI GTX 1080s. Looking to make the move over to a single RTX 3080. Do you still supply those adapter that work with the dual vapor chamber? I am interested if so. Link to comment Share on other sites More sharing options...
Developer79 Posted February 11 Share Posted February 11 11 hours ago, Drammar09 said: I have a stock P870TM1 with the i7-8086K and SLI GTX 1080s. Looking to make the move over to a single RTX 3080. Do you still supply those adapter that work with the dual vapor chamber? I am interested if so. Hi, yes, the P807TM is the best model in the P870xx series. Of course, the P870DM23/KM are also good! The P870TM is good because the CPU cooler is the best. Technically, all models are almost the same except for the chipset! Yes, I am the only one who developed the adapters that work with the RTX30xx in the P870xx with vapor chamber. I can always rebuild some. That's not a problem! You can also reach me here in the forum! My last development is the second fan for the CPU, which can now finally be controlled normally with Clevo's internal control. This means that the fan always turns optimally! I've left pictures in the forum... Furthermore, my desktop project would be worth mentioning. I'm sure you've already seen it! My latest project would be a test with the latest RTX50xx series.... Greetz Link to comment Share on other sites More sharing options...
Developer79 Posted February 11 Share Posted February 11 d Link to comment Share on other sites More sharing options...
varunreeves Posted February 11 Share Posted February 11 Hello Everyone, I have the pg870tm-r, Windows 11. I have Two internal nvmes and one external in a satechi enclosure (mentioned in order below) SAMSUNG 970 EVO ( 3500 MB/s and 2500 MB/s) SAMSUNG 990 PRO (7200 MB/s) WD Black SN850X ( 7200 MB/s). My internal speeds are around 2600 MB/s and external with the enclosure ( https://www.amazon.com/dp/B0BYPVNBTQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3) is 800 MB/s. Both seem too slow. Is this correct. Can someone please help / share Prema bios settings or any other changes needed to get the speeds to what they should be. ? Link to comment Share on other sites More sharing options...
Drammar09 Posted February 15 Share Posted February 15 @Developer79 It does appear my TM1 does have the PWM header for the 2nd fan already on the motherboard which would be awesome to have. I am going to send you a PM to see about getting that adapter plate from you if possible. Thanks again! 20 hours ago, Drammar09 said: It does appear my TM1 does have the PWM header for the 2nd fan already on the motherboard which would be awesome to have. I am going to send you a PM to see about getting that adapter plate from you if possible. Thanks again! 20 hours ago, Drammar09 said: @Developer79 It does appear my TM1 does have the PWM header for the 2nd fan already on the motherboard which would be awesome to have. I am going to send you a PM to see about getting that adapter plate from you if possible. Thanks again! The circuit board for the 2nd CPU fan is ready for production for the P870TM. I just have to do the assembly. Otherwise, the prototype phase is over and everything works as I developed it... Greetz... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now