Kyser777 Posted December 27, 2024 Posted December 27, 2024 27 minutes ago, Kyser777 said: my p870 (KM version) with 128GB of Ram can not boot I got PCI RESOURCES ERROR!!!!! error: insufficient PCI resources detected!!!! however it works fine with 96GB of ram (3x 32gb) or less my bios is the latest danske 128GB I heard a problem on the forum with thunderbolt and 128GB , is it related?? any FIX??? I made test when thunderbolt is disable in the BIOS , I can boot.... Why??
1610ftw Posted December 27, 2024 Posted December 27, 2024 2 hours ago, Kyser777 said: I made test when thunderbolt is disable in the BIOS , I can boot.... Why?? I am pretty sure that you can just skip by that screen at least that is what i recall from my 128GB bios in the P775TM. In any case the P870 offers a huge amount of connectivity and two GPU slots so at some point something has got to give. 2 x GPUs 2 x DP, 1 x HDMI, TB and 5 drive slots use a lot of bandwidth...
Kyser777 Posted December 28, 2024 Posted December 28, 2024 impossible to run away from the bios error message with 128GB of ram and thunderbolt enable I had to reduce the ram amount to keep the thunderbolt function... ------ BTW, nowadays my bios setting is resetting after some inactivity time (few hours), I changed the cmos battery with a new one under the keyboard, but the problem persist... what should be the voltage on the cmos battery to keep the setting?? is there any jumper for the cmos?? I hope I did not short something with the water-cooling system. any tips to diagnostic the problem?
Kyser777 Posted January 8, 2025 Posted January 8, 2025 it seems that the bios reset itself when the laptop can not boot after several time, can someone else confirm?
Developer79 Posted January 17, 2025 Posted January 17, 2025 Hi all, I'm thinking of doing a test with the latest RTX50xx generation in the P870xx. Would you be interested in that too!? Greetz 1 2
Developer79 Posted February 3, 2025 Posted February 3, 2025 Hi, the RTX5070ti FE and the PCB look very good! Let's see how it fits into the P870xx! I'll be in touch... 1
Drammar09 Posted February 10, 2025 Posted February 10, 2025 @Developer79 I have a stock P870TM1 with the i7-8086K and SLI GTX 1080s. Looking to make the move over to a single RTX 3080. Do you still supply those adapter that work with the dual vapor chamber? I am interested if so.
Developer79 Posted February 11, 2025 Posted February 11, 2025 11 hours ago, Drammar09 said: I have a stock P870TM1 with the i7-8086K and SLI GTX 1080s. Looking to make the move over to a single RTX 3080. Do you still supply those adapter that work with the dual vapor chamber? I am interested if so. Hi, yes, the P807TM is the best model in the P870xx series. Of course, the P870DM23/KM are also good! The P870TM is good because the CPU cooler is the best. Technically, all models are almost the same except for the chipset! Yes, I am the only one who developed the adapters that work with the RTX30xx in the P870xx with vapor chamber. I can always rebuild some. That's not a problem! You can also reach me here in the forum! My last development is the second fan for the CPU, which can now finally be controlled normally with Clevo's internal control. This means that the fan always turns optimally! I've left pictures in the forum... Furthermore, my desktop project would be worth mentioning. I'm sure you've already seen it! My latest project would be a test with the latest RTX50xx series.... Greetz
varunreeves Posted February 11, 2025 Posted February 11, 2025 Hello Everyone, Am also seeking refuge from NBR. Had a fun time there and hope this channel succeeds too. I have the pg870tm-r, Windows 11. I have Two internal nvmes and one external in a satechi enclosure (mentioned in order below) SAMSUNG 970 EVO ( 3500 MB/s and 2500 MB/s) SAMSUNG 990 PRO (7200 MB/s) WD Black SN850X ( 7200 MB/s). My internal speeds are around 2600 MB/s and external with the enclosure ( https://www.amazon.com/dp/B0BYPVNBTQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3) is 800 MB/s. Both seem too slow. Is this correct. Can someone please help / share Prema bios settings or any other changes needed to get the speeds to what they should be. ?
Drammar09 Posted February 15, 2025 Posted February 15, 2025 @Developer79 It does appear my TM1 does have the PWM header for the 2nd fan already on the motherboard which would be awesome to have. I am going to send you a PM to see about getting that adapter plate from you if possible. Thanks again! 20 hours ago, Drammar09 said: It does appear my TM1 does have the PWM header for the 2nd fan already on the motherboard which would be awesome to have. I am going to send you a PM to see about getting that adapter plate from you if possible. Thanks again! 20 hours ago, Drammar09 said: @Developer79 It does appear my TM1 does have the PWM header for the 2nd fan already on the motherboard which would be awesome to have. I am going to send you a PM to see about getting that adapter plate from you if possible. Thanks again! The circuit board for the 2nd CPU fan is ready for production for the P870TM. I just have to do the assembly. Otherwise, the prototype phase is over and everything works as I developed it... Greetz...
Developer79 Posted March 5, 2025 Posted March 5, 2025 The PCB of the new RTX5070 looks very good! The P870xx would work well with the latest RTX5070 series... 1
1610ftw Posted March 5, 2025 Posted March 5, 2025 On 2/11/2025 at 4:50 PM, varunreeves said: Hello Everyone, Am also seeking refuge from NBR. Had a fun time there and hope this channel succeeds too. I have the pg870tm-r, Windows 11. I have Two internal nvmes and one external in a satechi enclosure (mentioned in order below) SAMSUNG 970 EVO ( 3500 MB/s and 2500 MB/s) SAMSUNG 990 PRO (7200 MB/s) WD Black SN850X ( 7200 MB/s). My internal speeds are around 2600 MB/s and external with the enclosure ( https://www.amazon.com/dp/B0BYPVNBTQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3) is 800 MB/s. Both seem too slow. Is this correct. Can someone please help / share Prema bios settings or any other changes needed to get the speeds to what they should be. ? Have you checked something like Crystal Disk Mark and still it was only 2600 internally for read and write? In any case you will not see more than 3500 MB/s. Externally you will need a TB3 enclosure like this one: https://www.amazon.com/Enclosure-Aluminum-External-Support-Compatible/dp/B0BBZT42HC?th=1
Developer79 Posted May 14, 2025 Posted May 14, 2025 I have finished developing and producing my second CPU fan controller for the P870TM. This makes it possible to control the second 5V fan simultaneously with the 12V main fan! Pictures are shown in the main thread (P870TM). Everything works as I designed it...
1610ftw Posted May 19, 2025 Posted May 19, 2025 On 5/14/2025 at 9:17 AM, Developer79 said: I have finished developing and producing my second CPU fan controller for the P870TM. This makes it possible to control the second 5V fan simultaneously with the 12V main fan! Pictures are shown in the main thread (P870TM). Everything works as I designed it... Which main thread are you talking about?
Developer79 Posted May 19, 2025 Posted May 19, 2025 10 minutes ago, 1610ftw said: Which main thread are you talking about? From this one!
1610ftw Posted May 19, 2025 Posted May 19, 2025 43 minutes ago, Developer79 said: From this one! Well, this has hundreds of posts, got a link?
zerokool Posted May 22, 2025 Posted May 22, 2025 On 10/5/2022 at 9:45 PM, ViktorV said: Gallery of modifications Clevo p870tm I'm about to pick up a qtj1 cpu bios is 1.07.16. ec version is 1.06 .01 this is the 9900ks 128gb bios wondering if I need anything else
Raven Posted June 7, 2025 Posted June 7, 2025 On 2/11/2025 at 2:44 PM, Developer79 said: Yes, I am the only one who developed the adapters that work with the RTX30xx in the P870xx with vapor chamber. I can always rebuild some. That's not a problem! Can you provide a method to purchase the adaptors please, I need some for my 3080 16G Mxm card. Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD
Developer79 Posted June 11, 2025 Posted June 11, 2025 On 6/7/2025 at 4:56 AM, Raven said: Can you provide a method to purchase the adaptors please, I need some for my 3080 16G Mxm card. When I say I develop and build everything myself, there is no other source! 1
Raven Posted June 13, 2025 Posted June 13, 2025 On 6/11/2025 at 5:08 PM, Developer79 said: When I say I develop and build everything myself, there is no other source! And I have asked repeatedly in both direct messages and here since you've said you build, make and otherwise sell them. How do I buy one, and what is the price. I wish to purchase the bracket Take my money in exchange for goods Portable Desktop Killer: P870TM-G Core I7 - 9900K, RTX 2080 Super, 128GB DDR4 3200Mhz, 120Hz WQHD
Maro97 Posted June 13, 2025 Posted June 13, 2025 Hello guys does any one try to reballing an rtx 4090 gpu chipset on clevo rtx 3080 pcb ?
Developer79 Posted June 13, 2025 Posted June 13, 2025 6 hours ago, Maro97 said: Hello guys does any one try to reballing an rtx 4090 gpu chipset on clevo rtx 3080 pcb ? That's not going to work because the step downs are different sizes! 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now