zerokool Posted July 16 Share Posted July 16 Still testing but getting better scores . At 5 ghz the single core is a bit above 600 but puts out to much heat lol . Link to comment Share on other sites More sharing options...
zerokool Posted July 16 Share Posted July 16 Just now, zerokool said: Still testing but getting better scores . At 5 ghz the single core is a bit above 600 but puts out to much heat lol . My plan is to de lid the CPU . Put better compound on it and 5ghz all core . Regardless the QTJ1 is still a nice CPU Link to comment Share on other sites More sharing options...
PorcGras Posted July 16 Share Posted July 16 2 hours ago, zerokool said: My plan is to de lid the CPU . Put better compound on it and 5ghz all core . Regardless the QTJ1 is still a nice CPU What memory clocks is it reaching? Mine is kinda trash, won't do anything past 2133Mhz. The process of finding out was a real pain. Does anyone know the exact process to reset the cmos without removing the battery? It does say Fn+D should do that but it works 1/100 times it seems :)))) Link to comment Share on other sites More sharing options...
zerokool Posted July 16 Share Posted July 16 6 hours ago, PorcGras said: What memory clocks is it reaching? Mine is kinda trash, won't do anything past 2133Mhz. The process of finding out was a real pain. Does anyone know the exact process to reset the cmos without removing the battery? It does say Fn+D should do that but it works 1/100 times it seems :)))) Mine hits 2666 with 3 ram sticks in . Don't ask why lol but I'm betting with the right ram if get 2933 and sadly that's one of the only ways I've found to reset cmos aside from removing a ram stick which then makes the system retrain and boot Link to comment Share on other sites More sharing options...
zerokool Posted July 16 Share Posted July 16 6 hours ago, PorcGras said: What memory clocks is it reaching? Mine is kinda trash, won't do anything past 2133Mhz. The process of finding out was a real pain. Does anyone know the exact process to reset the cmos without removing the battery? It does say Fn+D should do that but it works 1/100 times it seems :)))) One thing . The cache on these is set at 21x so 2.1ghz . I bumped mine to 4.0 made a noticeable improvement Link to comment Share on other sites More sharing options...
PorcGras Posted July 16 Share Posted July 16 7 hours ago, zerokool said: One thing . The cache on these is set at 21x so 2.1ghz . I bumped mine to 4.0 made a noticeable improvement Noticeable improvement to the ram speed achievable? Or just overall cpu performance? Once I get a new working GPU I'll try it :)) If I ever do :))) Link to comment Share on other sites More sharing options...
zerokool Posted July 16 Share Posted July 16 52 minutes ago, PorcGras said: Noticeable improvement to the ram speed achievable? Or just overall cpu performance? Once I get a new working GPU I'll try it :)) If I ever do :))) Both . Even at 2666 it feels better and loading programs is just snappier 1 Link to comment Share on other sites More sharing options...
Dropzen Posted July 24 Share Posted July 24 On 6/21/2025 at 4:44 AM, runix18 said: You need EDP card, LVDS wont start. I managed to score a 1060 for a steal, and now the laptop is alive !! Now there is another issue :((. I am having issues installing the QTJ1 Processor. Once I install QTJ1, laptop won't boot. power button will light up and fan spin for 1 second, then dead. Tried many RAM sticks (I heard SK Hynix 2133 works well, I bought and tried them), no avail Reinstalling i5 9600KF: It boots just fine Bios Ver: P870TM-0511-9900KS Did I miss a step somewhere? Or perhaps I received a Faulty QTJ1 Link to comment Share on other sites More sharing options...
PorcGras Posted July 24 Share Posted July 24 2 hours ago, Dropzen said: I managed to score a 1060 for a steal, and now the laptop is alive !! Now there is another issue :((. I am having issues installing the QTJ1 Processor. Once I install QTJ1, laptop won't boot. power button will light up and fan spin for 1 second, then dead. Tried many RAM sticks (I heard SK Hynix 2133 works well, I bought and tried them), no avail Reinstalling i5 9600KF: It boots just fine Bios Ver: P870TM-0511-9900KS Did I miss a step somewhere? Or perhaps I received a Faulty QTJ1 U sure u got the right bios? You need to flash a bios with Intel ME disabled (I know Runix sent dsanke with ME disabled in some thread, you can easily find it). EDIT: You already flashed it before so you dont need this, but I'll leave it in in case somebody else needs it :))) Im really dumb and lack reading capabilities sorry :))) You can either do this with the previous cpu in and reflash the bios that way (I forget what the program used to do it is called, I think there are several anyway. I found mine in a post from dsanke himself on some chinese forum and downloaded all the stuff i needed from a baidu cloud drive 🙂 was really weird but it worked), or with a SOIC clip. Or there is also a way to do it with a usb drive but I never got that working 😞 Also I have a question myself... where the hell do yall find cheap MXM cards? All I can find is really really expensive :))) Link to comment Share on other sites More sharing options...
Dropzen Posted 18 hours ago Share Posted 18 hours ago I got lucky with a cheap 1060 mxm listing on Ebay Update on my situation!! I finally managed to get QTJ1 working on my P870, and here's how I did it (in case anyone is having the same issue). Download a BIOS modding software called Coffeetime My BIOS version (P870TM-0511-9900KS) actually didn't have ME disabled, you can use coffeetime to check and disable ME. After disabling ME, flash BIOS using ch341a programmer, and everything was A OK. QTJ1 running at stock clocks, core and cache -185mv undervolt, stable and mid 80s when full load with custom fan curve. Ram won't go past 2400MHz (im using 2x8GB 2133 SK Hynix Ram) Next upgrade on my list is adding a 3080 and upgrading the GPU heatsink. Any recommendations? Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago why the 10980hk se didnt pass 2400mhz ? on 1151 cpu socket Link to comment Share on other sites More sharing options...
PorcGras Posted 16 hours ago Share Posted 16 hours ago 2 minutes ago, Maro97 said: why the 10980hk se didnt pass 2400mhz ? on 1151 cpu socket The memory controller on these CPUs is absolute trash :)) Thats why. Mine boots with 2400MHz, but is stable at 2133MHz. Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago if QTJ1 cpu up to 3200MHZ ram ... then it will be a v.good cpu upgrade so 9900kf cpu is the best upgrade for P870 Link to comment Share on other sites More sharing options...
PorcGras Posted 16 hours ago Share Posted 16 hours ago Just now, Maro97 said: if QTJ1 cpu up to 3200MHZ ram ... then it will be a v.good cpu upgrade so 9900kf cpu is the best upgrade for P870 It depends on how lucky you are :)) Some do get good memory controllers on them and get them up to 2900 or 3200 :)) Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago i didnt see anyone can use QTJ1 with 3200mhz ram stable 7d/24h Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago it's a bug upgrade in my opinion Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago It’s a completely distorted upgrade to the laptop performance.something incomplete Link to comment Share on other sites More sharing options...
PorcGras Posted 16 hours ago Share Posted 16 hours ago 1 minute ago, Maro97 said: it's a bug upgrade in my opinion I upgraded from a 7700K to a QTJ1 and it was more than worth it... The CPU is almost twice as fast :)) Even tho I had to bump down my RAM from 2400 -> 2133 MHz, it was still worth it. Just a bit of a bummer that I couldn't get faster RAM speed :))) Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago Any upgrades need to downgrade It becomes a non-upgrade for the future Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago We are talking about ddr5 6400MT and we need to OC DDR4 not Underclocking it Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago But if all QTJ1 can support 3200mhz then we can say that’s a great upgrade Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now