Developer79 Posted September 8 Share Posted September 8 22 hours ago, zex4 said: I wished this modification was also possible on the p775 but of course not much space available as 870 😞 😞 i used the adt mxm adapter time ago but it was not comfortable with the long cable plus the psu conntected to gpu... It would also be conceivable to make a version for an MXM port, but then a desktop card still wouldn't fit in the P775! However, the power supply I developed would fit in the SSD slot. The problem then would be the space for the GFX! Link to comment Share on other sites More sharing options...
SuperMG Posted September 10 Share Posted September 10 (edited) @Developer79 Hello are pins 278 and 280 mandatory like pin 240 and 242? Or should they always pass to the GPU? It's just one line with some capacitors on the way. Some MXM cards don't have them visible, maybe it's inside the multi-layered PCB. Edited Thursday at 04:47 PM by SuperMG Link to comment Share on other sites More sharing options...
Developer79 Posted Saturday at 10:32 AM Share Posted Saturday at 10:32 AM On 9/10/2025 at 8:38 AM, SuperMG said: @Developer79 Hello are pins 278 and 280 mandatory like pin 240 and 242? Or should they always pass to the GPU? It's just one line with some capacitors on the way. Some MXM cards don't have them visible, maybe it's inside the multi-layered PCB. You can always tell by the vias! Sure, lines are often routed directly onto inner layers. My board has 12 layers and it was already very tight. It all resulted from the resulting geometry of the board!!! Link to comment Share on other sites More sharing options...
SuperMG Posted Saturday at 11:35 AM Share Posted Saturday at 11:35 AM 1 hour ago, Developer79 said: You can always tell by the vias! Sure, lines are often routed directly onto inner layers. My board has 12 layers and it was already very tight. It all resulted from the resulting geometry of the board!!! Yes, the multi-layered PCBs. Link to comment Share on other sites More sharing options...
Developer79 Posted Sunday at 03:48 PM Share Posted Sunday at 03:48 PM On 9/10/2025 at 8:38 AM, SuperMG said: @Developer79 Hello are pins 278 and 280 mandatory like pin 240 and 242? Or should they always pass to the GPU? It's just one line with some capacitors on the way. Some MXM cards don't have them visible, maybe it's inside the multi-layered PCB. I just wanted to say that you can see it when you look at Port! But you need good eyesight. Anyway, we don't need to fill the thread with too much information like that. I think for most people, it's the results that count. Link to comment Share on other sites More sharing options...
zex4 Posted 9 hours ago Share Posted 9 hours ago does someone have full drivers pack for the p870tm1 ? i cant find it on google anymore...there was two clevo drivers archive but both are down its seems ;( Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now