Developer79 Posted September 8 Share Posted September 8 22 hours ago, zex4 said: I wished this modification was also possible on the p775 but of course not much space available as 870 😞 😞 i used the adt mxm adapter time ago but it was not comfortable with the long cable plus the psu conntected to gpu... It would also be conceivable to make a version for an MXM port, but then a desktop card still wouldn't fit in the P775! However, the power supply I developed would fit in the SSD slot. The problem then would be the space for the GFX! Link to comment Share on other sites More sharing options...
SuperMG Posted September 10 Share Posted September 10 (edited) @Developer79 Hello are pins 278 and 280 mandatory like pin 240 and 242? Or should they always pass to the GPU? It's just one line with some capacitors on the way. Some MXM cards don't have them visible, maybe it's inside the multi-layered PCB. Edited September 11 by SuperMG Link to comment Share on other sites More sharing options...
Developer79 Posted September 13 Share Posted September 13 On 9/10/2025 at 8:38 AM, SuperMG said: @Developer79 Hello are pins 278 and 280 mandatory like pin 240 and 242? Or should they always pass to the GPU? It's just one line with some capacitors on the way. Some MXM cards don't have them visible, maybe it's inside the multi-layered PCB. You can always tell by the vias! Sure, lines are often routed directly onto inner layers. My board has 12 layers and it was already very tight. It all resulted from the resulting geometry of the board!!! Link to comment Share on other sites More sharing options...
SuperMG Posted September 13 Share Posted September 13 1 hour ago, Developer79 said: You can always tell by the vias! Sure, lines are often routed directly onto inner layers. My board has 12 layers and it was already very tight. It all resulted from the resulting geometry of the board!!! Yes, the multi-layered PCBs. Link to comment Share on other sites More sharing options...
Developer79 Posted September 14 Share Posted September 14 On 9/10/2025 at 8:38 AM, SuperMG said: @Developer79 Hello are pins 278 and 280 mandatory like pin 240 and 242? Or should they always pass to the GPU? It's just one line with some capacitors on the way. Some MXM cards don't have them visible, maybe it's inside the multi-layered PCB. I just wanted to say that you can see it when you look at Port! But you need good eyesight. Anyway, we don't need to fill the thread with too much information like that. I think for most people, it's the results that count. Link to comment Share on other sites More sharing options...
zex4 Posted September 16 Share Posted September 16 does someone have full drivers pack for the p870tm1 ? i cant find it on google anymore...there was two clevo drivers archive but both are down its seems ;( Link to comment Share on other sites More sharing options...
Developer79 Posted September 17 Share Posted September 17 16 hours ago, zex4 said: does someone have full drivers pack for the p870tm1 ? i cant find it on google anymore...there was two clevo drivers archive but both are down its seems ;( Hi, try this link: https://eurocom.com/ec/drivers(429)SkyX9C 1 Link to comment Share on other sites More sharing options...
zex4 Posted September 18 Share Posted September 18 Ty 😊 Link to comment Share on other sites More sharing options...
Developer79 Posted October 12 Share Posted October 12 Hello everyone, If anyone needs a holder for the RTX10/20/30 in the P870DMG, I have some made of steel! This allows you to install Clevo's MXM cards from the GTX10xx / RTX20xx / RTX20xx Super / RTX30xx series in the P870DMG! 1 Link to comment Share on other sites More sharing options...
Developer79 Posted October 28 Share Posted October 28 Hello, I have slightly modified my new P870DMG graphics card holder(stainless steel). This allows the GTX10xx/RTX20xx/RTX20xxSuper/RTX30xx MXM series from Clevo to fit better. The standard MXM cards from other manufacturers will also fit into the P870DMG. That means the RTX40xx/RTX50xx series! With the latter, it may take a little more effort to get them to run properly in the P870DMG! 1 1 Link to comment Share on other sites More sharing options...
Developer79 Posted December 5 Share Posted December 5 here is my holder for P870DMG in real:-) 3 Link to comment Share on other sites More sharing options...
Developer79 Posted 19 hours ago Share Posted 19 hours ago This is my desktop project showing how the desktop graphics card is installed in the P870xx! Here's a photo showing the MXM adapter board and power board in the 2.5 hard drive bay. 1 Link to comment Share on other sites More sharing options...
Maro97 Posted 18 hours ago Share Posted 18 hours ago 2026 maybe a great year @Developer79 1 Link to comment Share on other sites More sharing options...
Maro97 Posted 18 hours ago Share Posted 18 hours ago 40 minutes ago, Developer79 said: This is my desktop project showing how the desktop graphics card is installed in the P870xx! Here's a photo showing the MXM adapter board and power board in the 2.5 hard drive bay. what about GPU cooling system ? Link to comment Share on other sites More sharing options...
Maro97 Posted 18 hours ago Share Posted 18 hours ago and you don't need the two gpu fans ? right ? Link to comment Share on other sites More sharing options...
Developer79 Posted 17 hours ago Share Posted 17 hours ago 25 minutes ago, Maro97 said: and you don't need the two gpu fans ? right ? It depends on the cooling! Water cooling is quicker to implement. A vapor chamber must be well made. Link to comment Share on other sites More sharing options...
Developer79 Posted 17 hours ago Share Posted 17 hours ago 31 minutes ago, Maro97 said: what about GPU cooling system ? It always has to be done specifically for the respective card. That's no problem, there is a desktop card that you can choose and that fits well. The RTX5070 Ti and RTX 5080 are quite suitable. The RTX5070Ti is the best choice and offers a good compromise between gaming and power consumption! Link to comment Share on other sites More sharing options...
Maro97 Posted 16 hours ago Share Posted 16 hours ago How did you cool the RTX 5070 Ti graphics card? And which company manufactured the card? Link to comment Share on other sites More sharing options...
Developer79 Posted 1 hour ago Share Posted 1 hour ago 15 hours ago, Maro97 said: How did you cool the RTX 5070 Ti graphics card? And which company manufactured the card? Since several cards are compatible and I have only tested one prototype, I used standard cooling. First, I would need to find a good card or make a list. Then I can implement water cooling. That shouldn't be too difficult, because in the end it's just small copper heat sinks for GPU dies and MOSFETs. First, the new MXM adapter boards are ready and need to be tested after assembly. For me, the problem was resolution and frequency. Hopefully, that will be fixed soon. If everything works, my MXM adapter will be fully compatible with the P870xx!!! I also modified the power board a bit to achieve good performance in the P870xx. Many Nvidia, AMD, and Intel cards will then work! Besides, I am a ONE-MAN development team, and you need money for that too! I don't have much of that at the moment. That's the status! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now