Jump to content
NotebookTalk

Recommended Posts

Posted
2 hours ago, Chalybion said:

In my experience, the laptop's internal screen does not support V-sync, but V-sync should work via DP or HDMI connection to an external screen.

 

Vsync doesn't require specific support from the panel to operate. (An adaptive refresh rate functionality like Gsync or Freesync does, though.)

Apple MacBook Pro 16-inch, 2023 (personal) • Dell Precision 7560 (work) • Full specs in spoiler block below
Info posts (Windows) — Turbo boost toggle • The problem with Windows 11 • About Windows 10/11 LTSC

Spoiler

Apple MacBook Pro 16-inch, 2023 (personal)

  • M2 Max
    • 4 efficiency cores
    • 8 performance cores
    • 38-core Apple GPU
  • 96GB LPDDR5-6400
  • 8TB SSD
  • macOS 26 "Tahoe"
  • 16.2" 3456×2234 120 Hz mini-LED ProMotion display
  • Wi-Fi 6E + Bluetooth 5.3
  • 99.6Wh battery
  • 1080p webcam
  • Fingerprint reader

Also — iPhone 12 Pro 512GB, Apple Watch Series 8

 

Dell Precision 7560 (work)

  • Intel Xeon W-11955M ("Tiger Lake")
    • 8×2.6 GHz base, 5.0 GHz turbo, hyperthreading ("Willow Cove")
  • 64GB DDR4-3200 ECC
  • NVIDIA RTX A2000 4GB
  • Storage:
    • 512GB system drive (Micron 2300)
    • 4TB additional storage (Sabrent Rocket Q4)
  • Windows 11 Enterprise LTSC 2024
  • 15.6" 3940×2160 IPS display
  • Intel Wi-Fi AX210 (Wi-Fi 6E + Bluetooth 5.3)
  • 95Wh battery
  • 720p IR webcam
  • Fingerprint reader

 

Previous

  • Dell Precision 7770, 7530, 7510, M4800, M6700
  • Dell Latitude E6520
  • Dell Inspiron 1720, 5150
  • Dell Latitude CPi
Posted

Great!Thank you guys very much for answers.So i maybe would buy p2000,it's price is lower than t1000's.I did work with p2000 on precision 7530,it's perfomance was enough for me,but 7530's cpu is hot,7510 has nice temperatures.And something else - do you feel some delay (input lag) with switchable graphics in games?

Posted

I have done quite a bit of gaming with Optimus (switchable graphics) turned on and I have never noticed any issue with latency. In any case, you should be able to try it with your current card and see how it feels for you.

Apple MacBook Pro 16-inch, 2023 (personal) • Dell Precision 7560 (work) • Full specs in spoiler block below
Info posts (Windows) — Turbo boost toggle • The problem with Windows 11 • About Windows 10/11 LTSC

Spoiler

Apple MacBook Pro 16-inch, 2023 (personal)

  • M2 Max
    • 4 efficiency cores
    • 8 performance cores
    • 38-core Apple GPU
  • 96GB LPDDR5-6400
  • 8TB SSD
  • macOS 26 "Tahoe"
  • 16.2" 3456×2234 120 Hz mini-LED ProMotion display
  • Wi-Fi 6E + Bluetooth 5.3
  • 99.6Wh battery
  • 1080p webcam
  • Fingerprint reader

Also — iPhone 12 Pro 512GB, Apple Watch Series 8

 

Dell Precision 7560 (work)

  • Intel Xeon W-11955M ("Tiger Lake")
    • 8×2.6 GHz base, 5.0 GHz turbo, hyperthreading ("Willow Cove")
  • 64GB DDR4-3200 ECC
  • NVIDIA RTX A2000 4GB
  • Storage:
    • 512GB system drive (Micron 2300)
    • 4TB additional storage (Sabrent Rocket Q4)
  • Windows 11 Enterprise LTSC 2024
  • 15.6" 3940×2160 IPS display
  • Intel Wi-Fi AX210 (Wi-Fi 6E + Bluetooth 5.3)
  • 95Wh battery
  • 720p IR webcam
  • Fingerprint reader

 

Previous

  • Dell Precision 7770, 7530, 7510, M4800, M6700
  • Dell Latitude E6520
  • Dell Inspiron 1720, 5150
  • Dell Latitude CPi
Posted

Thanks again.So this is a reason for thinking about t1000 or 1650.Have one more question - can you explain me why xeon e3-1535m (has 4 cores/8 threads with 2.9-3.8hz) works with normal temperatures (i saw 70-71 C maximum),but i5-9400h on same process size 14nm and socket,has also 4 cores/8 threads with a similar perfomance,but works hot and a temperature jumps every second,from normal to peak with difference 15-20 degrees.Xeon's temps increase smoothly,without any jump.Both notebooks are clean,with new thermal interface.

Posted

Not sure if anyone got this, but after disassembly (and reassembly) the touchpad and the point stick stopped working, the keyboard was fine. They connect with the same ribbon cable, so it most likely wasn’t it. What turned out to be was this setting in the BIOS. After hitting “Apply” everything was fine. 
 

IMG_5379.thumb.jpeg.3e4aab0f88342bd30686ebb949e5abe3.jpeg

8740w - DreamColor 2 | 920XM | GTX 980M 8GB | 32GB | MX200 mSATA 500GB + MX500 2TB | 6300AGN | W10P64 | 350W | MX Master 3s | MX Keys S | ZR30w | Z-5500 | G29 + shifter
8740w - testbed

HDX9000

  • 5 months later...
Posted

Hey everyone, I just picked up a Dell Precision 7510, upgrading from my Precision M4600 (great machine, but getting harder to work with).

 

Current specs:

• Xeon E3-1535M v5

• 32GB DDR4

• Quadro M2200

• Linux Mint primary / Windows 11 secondary

 

I plan to swap in an E3-1575M v5 board. That CPU includes 128MB eDRAM (Crystalwell) and the Intel P580 iGPU. I prefer running Optimus for battery life, so that makes more sense to me than moving to a 1535M v6 board from a 7520 (assuming interchangeability holds).

 

I’ve seen people upgrade these to 1440p 240Hz panels and even RTX-era MXM GPUs. I’m curious about the process and any complications you ran into.

 

Specifically:

• How did the MXM GPU behave?

• Any POST errors or BIOS limitations?

• Does discrete mode work properly?

• Do you need an external display for initial setup?

 

Your Windows experience is useful to me as well — I’ll be running Linux primarily, but I want to understand platform limitations.

 

My goal is to modify and upgrade this machine as far as it reasonably goes. I’ll be using it for college and as a mobile gaming system.

(Primary Desktop) Arch Linux | Core Ultra 7 265Kf | RX 9060 Xt 16gb | G.Skill Trident Z DDR5-7800MHz CL 36 | ASRock LiveMixer WIFI Z890 | Thermalrite Aqua Elite V4 | Montech Century II 850 Watt Gold | Montech XR | P510 2Tb NVME (Game Drive) | MP44L 512gb (Arch Drive + Grub Host) | 512gb Sata SSD (Windows 11 Drive) | 512gb Sata HDD (Debian Boot) | 1Tb Sata HDD Spare storage | Koorui Mini-LED 200hz 1440p Monitor

 

(Primary Laptop) Dell Precision 7510 | Linux Mint| Xeon E3-1535m V5 | Nvidia Quadro M2200 | 32GB DDR4-2144 | 1080p 60hz FHD pannel

 

(Server Computer In Progress) Dell Precision T3600 | Xeon E5-2687w (Sandy Bridge) | 16gb DDR3-1066 Quad channel | R7 250

 

(Collection Pieces)

AntiX Linux | Dell Precision m4600 | i7-2860qm (cpu mark world record at 5666)| 16gb DDR3-1600| Quadro K2100m | 1080p 60hz FHD pannel

 

Posted
3 hours ago, Daviboy said:

Hey everyone, I just picked up a Dell Precision 7510, upgrading from my Precision M4600 (great machine, but getting harder to work with).

 

Current specs:

• Xeon E3-1535M v5

• 32GB DDR4

• Quadro M2200

• Linux Mint primary / Windows 11 secondary

 

I plan to swap in an E3-1575M v5 board. That CPU includes 128MB eDRAM (Crystalwell) and the Intel P580 iGPU. I prefer running Optimus for battery life, so that makes more sense to me than moving to a 1535M v6 board from a 7520 (assuming interchangeability holds).

 

I’ve seen people upgrade these to 1440p 240Hz panels and even RTX-era MXM GPUs. I’m curious about the process and any complications you ran into.

 

Specifically:

• How did the MXM GPU behave?

• Any POST errors or BIOS limitations?

• Does discrete mode work properly?

• Do you need an external display for initial setup?

 

Your Windows experience is useful to me as well — I’ll be running Linux primarily, but I want to understand platform limitations.

 

My goal is to modify and upgrade this machine as far as it reasonably goes. I’ll be using it for college and as a mobile gaming system.

Hello. I got the i7 7820HQ Precision 7720 FHD version (same as 7710 but 7th gen core I) and I managed to use an RTX 4070 MXM-A with the backlight mod cable. No problem, drivers are plug and play with nvcleanstall. No ACPI problems, No thermal problems, just needed to modify the heatsink.

 

You need to get a better heatsink for your eDP 7510 because it'll be weak for any RTX 4060/4070.

 

These cards are compatible with 1440p displays and 4k too as long as they are eDP and compatible with your laptop.

 

Yes I run the RTX MXM in discrete mode, on eDP.

 

You can ask cicichen on ebay for a custom one.

Posted
On 2/26/2026 at 9:45 PM, SuperMG said:

 

You can ask cicichen on ebay for a custom one.

 

will cost 100 bucks. 

Phantom Gaming ITX B550 - 5950X @ 5.3GHz PBO - 2x16GB @ 3700 C14 - 9070 XT 16GB - 2TB + 1TB NVMe - 2TB + 2x1TB SATA SSD - Win 11 Pro

7720 - i7-7820HQ - 2x 16GB 2666 C15 - P5200 16GB - Samsung 960 Pro 512GB NVMe + WD SN730 1TB NVMe - Wifi 6E - Win 11 Pro

M6800 - i7-4930MX - 4x4GB 2133 C11 - GTX 880M 8GB(not working atm😒) - Kioxa BG5 1TB mPCIe - 2x Samsung 850 Evo 250GB Raid0 - Wifi 6 - Win 11 Pro

Posted
16 minutes ago, Annihilator said:

 

will cost 100 bucks. 

Yes that's the cheapest price you can find. I hope he adds some extra heatpipes

Posted
7 hours ago, SuperMG said:

Yes that's the cheapest price you can find. I hope he adds some extra heatpipes

 

im happy when he only put a RTX heatsink on the original heatpipes from the 7720, 120W n still far away(always below 60°c.) from throttling, but the CPU part isnt the best, but its ok bcs still below 80°c. at full load

Phantom Gaming ITX B550 - 5950X @ 5.3GHz PBO - 2x16GB @ 3700 C14 - 9070 XT 16GB - 2TB + 1TB NVMe - 2TB + 2x1TB SATA SSD - Win 11 Pro

7720 - i7-7820HQ - 2x 16GB 2666 C15 - P5200 16GB - Samsung 960 Pro 512GB NVMe + WD SN730 1TB NVMe - Wifi 6E - Win 11 Pro

M6800 - i7-4930MX - 4x4GB 2133 C11 - GTX 880M 8GB(not working atm😒) - Kioxa BG5 1TB mPCIe - 2x Samsung 850 Evo 250GB Raid0 - Wifi 6 - Win 11 Pro

Posted

Okay good to know, just looking into how long I can get usability out of this machine. I have a 1545m v5 board coming in soon as a replacement, mainly due to the large L4 cache pool, and Iris Pro P580, should help the Optimus pipeline. Trying to prioritize battery life using that.

 

As for the RTX Mxm 3.0/3.1a GPUs what brand in particular are you getting them from? I would assume some 3rd party manufacturers like Adata.

 

And for a 1440p display I see ‘compatable’ 1440p 265hz displays that fit a 40 pin eDP connection, but are there any you guys would recommend? And is there any OLED, QLED, Mini-LED options for display or is standard IPS? 
 

Thanks for all awnsers.

(Primary Desktop) Arch Linux | Core Ultra 7 265Kf | RX 9060 Xt 16gb | G.Skill Trident Z DDR5-7800MHz CL 36 | ASRock LiveMixer WIFI Z890 | Thermalrite Aqua Elite V4 | Montech Century II 850 Watt Gold | Montech XR | P510 2Tb NVME (Game Drive) | MP44L 512gb (Arch Drive + Grub Host) | 512gb Sata SSD (Windows 11 Drive) | 512gb Sata HDD (Debian Boot) | 1Tb Sata HDD Spare storage | Koorui Mini-LED 200hz 1440p Monitor

 

(Primary Laptop) Dell Precision 7510 | Linux Mint| Xeon E3-1535m V5 | Nvidia Quadro M2200 | 32GB DDR4-2144 | 1080p 60hz FHD pannel

 

(Server Computer In Progress) Dell Precision T3600 | Xeon E5-2687w (Sandy Bridge) | 16gb DDR3-1066 Quad channel | R7 250

 

(Collection Pieces)

AntiX Linux | Dell Precision m4600 | i7-2860qm (cpu mark world record at 5666)| 16gb DDR3-1600| Quadro K2100m | 1080p 60hz FHD pannel

 

Posted
On 3/1/2026 at 9:22 PM, Daviboy said:

Okay good to know, just looking into how long I can get usability out of this machine. I have a 1545m v5 board coming in soon as a replacement, mainly due to the large L4 cache pool, and Iris Pro P580, should help the Optimus pipeline. Trying to prioritize battery life using that.

 

As for the RTX Mxm 3.0/3.1a GPUs what brand in particular are you getting them from? I would assume some 3rd party manufacturers like Adata.

 

And for a 1440p display I see ‘compatable’ 1440p 265hz displays that fit a 40 pin eDP connection, but are there any you guys would recommend? And is there any OLED, QLED, Mini-LED options for display or is standard IPS? 
 

Thanks for all awnsers.

 

MXM Type Series - X-VSION GRAPHICS CARD 

 

n im not sure the output can deliver more then 120Hz at 1080p.

Phantom Gaming ITX B550 - 5950X @ 5.3GHz PBO - 2x16GB @ 3700 C14 - 9070 XT 16GB - 2TB + 1TB NVMe - 2TB + 2x1TB SATA SSD - Win 11 Pro

7720 - i7-7820HQ - 2x 16GB 2666 C15 - P5200 16GB - Samsung 960 Pro 512GB NVMe + WD SN730 1TB NVMe - Wifi 6E - Win 11 Pro

M6800 - i7-4930MX - 4x4GB 2133 C11 - GTX 880M 8GB(not working atm😒) - Kioxa BG5 1TB mPCIe - 2x Samsung 850 Evo 250GB Raid0 - Wifi 6 - Win 11 Pro

  • 3 weeks later...
Posted

Just accidently joined the 7520 and the 7720 club LOL.

 

Have a T1000 from Adlink coming and Tesla P6 for 7720 (removing P4000 for another laptop). 

 

  

On 1/19/2024 at 1:53 PM, M4980 said:

 

Anyone want to trade an MXM-A RTX 2000 Ada for the rare "golden T1000" 🤣 in all serious though I wonder why it's doing this, the same occurs in the 7520 so it must be the card

The power draw is reported as 3w maybe that has something to do with it or perhaps my VBIOS is bugged/unrestricted?

And yeah, I manually overclocked the 7920HQ in ThrottleStop after doing those EFI variable unlocks, I usually just run it on 3.1GHz all core though as it allows the GPU to throttle less and I'm rarely CPU bound in anything. If I need more CPU power I switch to my TS config for 4GHz all core with an -77mv undervolt

 

 

Can you dump your T1000 vbios? Curious if it's different from mine 

Alienware Area-51M R2 : Intel Core i9-10900K                   | nVidia GeForce RTX 2080 SUPER    

Alienware Area-51M :      Intel Core i9-9900K @ 5.3Ghz    | nVidia GeForce RTX 2080

Alienware 18 :                   Intel Core i7 4930MX @ 4.5Ghz  | nVidia Quadro RTX 5000 

Alienware 17 :                   Intel Core i7 4940MX @ 4.5Ghz  | nVidia GeForce RTX 4090       
Alienware M18x R2 :        Intel Core i7 3920XM @ 4.7Ghz  | nVidia GeForce RTX 3080       

Alienware M18x :              Intel Core i7 2960XM @ 4.7Ghz | nVidia Quadro RTX 5000

Alienware M17xR3 :         Intel Core i7 2920XM @ 4.7Ghz  |  nVidia Quadro RTX 5000

Alienware M14x | M14xR2 | M15x (980m) | M17xR2 (RTX 3000)| Precision M6600 (P4000) | 7520 (T1000) | 7720 (Tesla P6)

BEAST Server:          Intel Xeon W7-3465X 28 P-Cores | 2x nVidia RTX Titan | 128GB RDIMM | Intel Optane P5800X


CS Studios YouTube: https://www.youtube.com/c/CSStudiosYT 

Posted
On 3/1/2026 at 9:22 PM, Daviboy said:

Okay good to know, just looking into how long I can get usability out of this machine. I have a 1545m v5 board coming in soon as a replacement, mainly due to the large L4 cache pool, and Iris Pro P580, should help the Optimus pipeline. Trying to prioritize battery life using that.

 

As for the RTX Mxm 3.0/3.1a GPUs what brand in particular are you getting them from? I would assume some 3rd party manufacturers like Adata.

 

And for a 1440p display I see ‘compatable’ 1440p 265hz displays that fit a 40 pin eDP connection, but are there any you guys would recommend? And is there any OLED, QLED, Mini-LED options for display or is standard IPS? 
 

Thanks for all awnsers.

 

I ran a 4K120Hz IPS display on my 7720 but I couldn't get the 120hz to work, even when selecting 1080p 120Hz, I was stuck at 4K60hz this is because the MUX switch on the laptop limits the bandwidth to eDP/DP 1.3 speed, even in dGPU mode. When I tried to force 120Hz the laptop would show massive artifacts and glitches and it reverted automatically after 15s. However this could be due to the display as it's eDP 1.4 and might have compatibility problems with the system.

 

However I got a 1440p 165hz IPS running at 165Hz as of right now on my 7720, that's to give you an idea of the max bandwidth you can run on these systems.

 

If you are into modding, look for 16 16:10inch OLED displays, specifically this one that is listing really cheap : 2880x1800@120Hz (you'll might at 60Hz) from an HP spectre 16 :

 

Matryca HP HP Envy x360 16-ad WQXGA TS C | eBay

 

The sellers maybe don't sell out of Europe, they usually have good deals on used displays, I got my 4K120hz display from them, a few tiny scratches and one slight spot in the corner but apart from that the display is really nice.

 

Regardless, 16 inch 16:10 can be modded into 15.6 inch laptop, you just need some vertical bezel headroom as the display is around 2 cm taller and it is also 0.3cm narrower. Display in this size and aspect ratio come in OLED variants as well.

 

Finally you can hunt down early vivobook 15s for their display as they have a drop in 15.6 inch FHD OLED display. I don't know about mini-LED displays though.

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

Posted
20 hours ago, JadeRover said:

 

I ran a 4K120Hz IPS display on my 7720 but I couldn't get the 120hz to work, even when selecting 1080p 120Hz, I was stuck at 4K60hz this is because the MUX switch on the laptop limits the bandwidth to eDP/DP 1.3 speed, even in dGPU mode. When I tried to force 120Hz the laptop would show massive artifacts and glitches and it reverted automatically after 15s. However this could be due to the display as it's eDP 1.4 and might have compatibility problems with the system.

 

However I got a 1440p 165hz IPS running at 165Hz as of right now on my 7720, that's to give you an idea of the max bandwidth you can run on these systems.

 

If you are into modding, look for 16 16:10inch OLED displays, specifically this one that is listing really cheap : 2880x1800@120Hz (you'll might at 60Hz) from an HP spectre 16 :

 

Matryca HP HP Envy x360 16-ad WQXGA TS C | eBay

 

The sellers maybe don't sell out of Europe, they usually have good deals on used displays, I got my 4K120hz display from them, a few tiny scratches and one slight spot in the corner but apart from that the display is really nice.

 

Regardless, 16 inch 16:10 can be modded into 15.6 inch laptop, you just need some vertical bezel headroom as the display is around 2 cm taller and it is also 0.3cm narrower. Display in this size and aspect ratio come in OLED variants as well.

 

Finally you can hunt down early vivobook 15s for their display as they have a drop in 15.6 inch FHD OLED display. I don't know about mini-LED displays though.


Please, can you share more details about the display upgrade? I was planning on putting a 1440p display on my 7720 as well. Like, are you using the stock UHD display cable (06GXDN)? What is the 1440p 165hz IPS display model? Also, did you need to reroute the cable internally because of the display connector position?

Posted

Yes I used the stock UHD display cable : 06GXDN it is the only way to get 4 lanes of eDP displays working = displays with > 1080p and or > 60Hz (without making your own display cable)

 

The display I have is this one : NV173QHM-ny4 BOE NE173QHM-NY4 Overview - Panelook.com 

 

I got it as it was a good deal on my local second hand shopping website (40 euros for the display)

 

Display connector side doesn't matter as the UHD cable is made for displays that have a connector on the left side (looking from back of display) and the cable leaves from the left hinge (looking front of the laptop) = You can use "left" or "right" sided display.

 

The display I used has a connector on the right side (looking from back of display) so I had to make the LCD cable loop back on itself inside the laptop lid so as to connect to the display. There is enough room in the "chin" below the display in the back panel to get the cable to loop back without making the LCD bezel bulge. I taped the display bezel back in place and no problems whatsoever since.

 

The only limit is bandwidth as we are limited to a DP 1.3 connection, even in dGPU mode, see here (DP1.3 columm on the right) :

image.thumb.png.1bdbd6ea8b8e2fd4de0591148202a60d.png

 

My display works as it is 1440p 165Hz 8bit. If you try to use 10 bit 1440p 165hz display you will have to run it at a lower refresh rate to use 10 bits or run in 8 bit mode to get 165Hz. During testing I got 4K 10 bit to work at 60Hz, trying 8 bit 120Hz gave artifacting and flickering image.

 

Hope this helps ! If you have more questions I can try to answer them as well. 

Regards,

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

  • 1 month later...
Posted
On 3/27/2026 at 9:28 AM, JadeRover said:

Yes I used the stock UHD display cable : 06GXDN it is the only way to get 4 lanes of eDP displays working = displays with > 1080p and or > 60Hz (without making your own display cable)

 

The display I have is this one : NV173QHM-ny4 BOE NE173QHM-NY4 Overview - Panelook.com 

 

I got it as it was a good deal on my local second hand shopping website (40 euros for the display)

 

Display connector side doesn't matter as the UHD cable is made for displays that have a connector on the left side (looking from back of display) and the cable leaves from the left hinge (looking front of the laptop) = You can use "left" or "right" sided display.

 

The display I used has a connector on the right side (looking from back of display) so I had to make the LCD cable loop back on itself inside the laptop lid so as to connect to the display. There is enough room in the "chin" below the display in the back panel to get the cable to loop back without making the LCD bezel bulge. I taped the display bezel back in place and no problems whatsoever since.

 

The only limit is bandwidth as we are limited to a DP 1.3 connection, even in dGPU mode, see here (DP1.3 columm on the right) :

image.thumb.png.1bdbd6ea8b8e2fd4de0591148202a60d.png

 

My display works as it is 1440p 165Hz 8bit. If you try to use 10 bit 1440p 165hz display you will have to run it at a lower refresh rate to use 10 bits or run in 8 bit mode to get 165Hz. During testing I got 4K 10 bit to work at 60Hz, trying 8 bit 120Hz gave artifacting and flickering image.

 

Hope this helps ! If you have more questions I can try to answer them as well. 

Regards,


Thanks for all the info! Do you know if the 240Hz display (NE173QHM-NZ1) would also work? Or is 165Hz the limit for 1440p? Now, regarding the OLED drop-in replacement screen for a 15.6-inch laptop: do you know if there’s a panel with the same specs but a refresh rate higher than 60Hz? Or is the 60Hz screen from the VivoBook 15 actually the only drop-in option?

Posted

Hello,

 

I don't think that 240Hz will work as the 7720/7520 are limited to DP1.2 signal speeds so that would be 190fps max at 1440p (according to wikipedia).

 

What happens is that when you select that refresh rate the screen artifacts and then windows reverts to 60Hz after 15s (since you can't press the accept changes button)

 

I don't think there are 16:9 OLED panels that support >60Hz. 16:10 they do exists, also from the vivobook line but then you would have to make sure it can actually fit in the display cover of the laptop.

 

Go through 15.6inch OLED panels in panelook to find all the model numbers + specs 

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

  • 6 months later...
Posted

Confirmed: Quadro M2200 (Dell 07024K) working in a Precision 7510

 

For anyone wondering if the M2200 drops into a 7510, it does. Details from my unit:

 

HARDWARE

- Precision 7510 (Xeon, Intel HD P530), bought with the GPU card missing

- Card: Dell OEM Quadro M2200 4GB, P/N 07024K, pulled from a 7520

- Heatsink: the 7510's own original Nvidia heatsink (Dell P/N 44PG6) with both fans, re-pasted with Arctic MX-4

- RAM: 4x8GB DDR4-2400 (32GB), Task Manager shows 2400 MHz, 4 of 4 slots

 

WINDOWS

- Device Manager: NVIDIA Quadro M2200 + Intel HD Graphics P530

- Task Manager GPU page: 4.0 GB dedicated memory, DirectX 12 (FL 12.1), PCI bus 1 / device 0 / function 0, driver 32.0.15.8299 (dated 9/28/2026), about 35 C idle

 

BIOS: Video > Switchable Graphics

- ON: defaults to the Intel iGPU and switches to the M2200 when a game or app needs it (normal Optimus behavior)

- OFF: runs on the M2200 as the dedicated GPU, no display problems

 

POWER ADAPTERS (BIOS > Battery Information shows the wattage it detects)

- Dell 240W (P/N 00YR68): shows "AC Adapter = 240W"

- 330W 19.5V 16.9A (Dell P/N 0Y90RR, model DA330PM111, Alienware type): shows "AC Adapter = 330W"

Both are recognized by the 7510.

 

I haven't run a sustained load test yet and will post temps when I do.

Posted
On 3/27/2026 at 1:28 PM, JadeRover said:

Yes I used the stock UHD display cable : 06GXDN it is the only way to get 4 lanes of eDP displays working = displays with > 1080p and or > 60Hz (without making your own display cable)

 

The display I have is this one : NV173QHM-ny4 BOE NE173QHM-NY4 Overview - Panelook.com 

 

I got it as it was a good deal on my local second hand shopping website (40 euros for the display)

 

Display connector side doesn't matter as the UHD cable is made for displays that have a connector on the left side (looking from back of display) and the cable leaves from the left hinge (looking front of the laptop) = You can use "left" or "right" sided display.

 

The display I used has a connector on the right side (looking from back of display) so I had to make the LCD cable loop back on itself inside the laptop lid so as to connect to the display. There is enough room in the "chin" below the display in the back panel to get the cable to loop back without making the LCD bezel bulge. I taped the display bezel back in place and no problems whatsoever since.

 

The only limit is bandwidth as we are limited to a DP 1.3 connection, even in dGPU mode, see here (DP1.3 columm on the right) :

image.thumb.png.1bdbd6ea8b8e2fd4de0591148202a60d.png

 

My display works as it is 1440p 165Hz 8bit. If you try to use 10 bit 1440p 165hz display you will have to run it at a lower refresh rate to use 10 bits or run in 8 bit mode to get 165Hz. During testing I got 4K 10 bit to work at 60Hz, trying 8 bit 120Hz gave artifacting and flickering image.

 

Hope this helps ! If you have more questions I can try to answer them as well. 

Regards,


Hi everyone,


I respect all your work and your efforts to push the limits a little further. I’d just like to contribute something as well. During my experiments with a 4K display I successfully achieved a 97 Hz refresh rate ( source DP 1.3 and  DP1.4) at a bandwidth of 2.7 Gbps 10-bit using a 4-lanes configuration. With a 3-lanes configuration I only reached 30 Hz.

 

However, I didn’t have any mux switch between. For the connection I used a universal standard 25-cm-long flex cable covered with aluminum foil for shielding. The 0.5-mm pin pitch is the same as that of an eDP connector I-PEX 30 or 40-pin.

Alienware M18x R1 i7-2720xm-32GB-Adlink RTX5000

Alienware M18x R2 i7-3920xm-32GB-RTX4090 (still in testing) with the latest bios version. A14 specially modified updated and unlocked by me 😎

Asus ROG Zephyrus G14 AMD Ryzen 9 7940HS-32GB-RTX4060

 

Posted
55 minutes ago, janepa said:


Hi everyone,


I respect all your work and your efforts to push the limits a little further. I’d just like to contribute something as well. During my experiments with a 4K display I successfully achieved a 97 Hz refresh rate ( source DP 1.3 and  DP1.4) at a bandwidth of 2.7 Gbps 10-bit using a 4-lanes configuration. With a 3-lanes configuration I only reached 30 Hz.

 

However, I didn’t have any mux switch between. For the connection I used a universal standard 25-cm-long flex cable covered with aluminum foil for shielding. The 0.5-mm pin pitch is the same as that of an eDP connector I-PEX 30 or 40-pin.

 

Hello, this is very interesting, you connected a 4K eDP display to the eDP port of the laptop with this shielded flex cable ?

 

I also saw on 51nb forums that precision 7710/7720 (same for 7510 and 7520) could use a 120hz 4k eDP display downclocked to 105Hz through the mux switch. 105hz is with the MXM dPGU, if not with intel iGPU it is max 60Hz (can be overclocked a bit but not much).

 

The real limits on these systems is the mux switch that got better and better each generation, for example @DevilAnGeL mentionned on 51nb that the zbook 17 G6 could use 4K 144Hz display through the mux switch, the 7x10 and 7x20 systems have an older mux switch that tops out at around 100Hz @ 4K. Side note, my precision 7720 (downgraded to a 7710 motherboard) can drive my 1440p 165Hz no problem for close to a year now.

 

The "hardcore" method to get higher bandwidth to the display would be to:

- remove the mux switch and then solder the 4 pairs of eDP directly to the MXM slot for no limit on eDP version -> lose switch graphics ability + extremely hard to solder 8 small wires on a 5mm x 9mm footprint.

- replace the MUX switch with a newer one. However since the precision 7x10 and 7x20 have a QFN60 mux switch, there is no upgrade, newer mux switches are QFN66.

 

image.thumb.png.ddd86846f43bb9cd50b059a250c73013.png

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

Posted
5 minutes ago, JadeRover said:

 

Hello, this is very interesting, you connected a 4K eDP display to the eDP port of the laptop with this shielded flex cable ?

 

I also saw on 51nb forums that precision 7710/7720 (same for 7510 and 7520) could use a 120hz 4k eDP display downclocked to 105Hz through the mux switch. 105hz is with the MXM dPGU, if not with intel iGPU it is max 60Hz (can be overclocked a bit but not much).

 

The real limits on these systems is the mux switch that got better and better each generation, for example @DevilAnGeL mentionned on 51nb that the zbook 17 G6 could use 4K 144Hz display through the mux switch, the 7x10 and 7x20 systems have an older mux switch that tops out at around 100Hz @ 4K. Side note, my precision 7720 (downgraded to a 7710 motherboard) can drive my 1440p 165Hz no problem for close to a year now.

 

The "hardcore" method to get higher bandwidth to the display would be to:

- remove the mux switch and then solder the 4 pairs of eDP directly to the MXM slot for no limit on eDP version -> lose switch graphics ability + extremely hard to solder 8 small wires on a 5mm x 9mm footprint.

- replace the MUX switch with a newer one. However since the precision 7x10 and 7x20 have a QFN60 mux switch, there is no upgrade, newer mux switches are QFN66.

 

image.thumb.png.ddd86846f43bb9cd50b059a250c73013.png

Hello. What about the Dell Precision M4800?

 

4 eDP lanes with MUX Switch. eDP 1.3/1.4 revision, HBR2. Supports 3/4K at 60Hz.

Posted
12 minutes ago, SuperMG said:

Hello. What about the Dell Precision M4800?

 

4 eDP lanes with MUX Switch. eDP 1.3/1.4 revision, HBR2. Supports 3/4K at 60Hz.

 

It depends if you have the 1 or the 2 motherboard.

 

- LA-9771P is a "dual LVDS + eDP motherboard", just like m6700 except that it has both signals on one connector, I talked previously on how to upgrade a LA-9771P motherboard to a "full" eDP motherboard (requires the correct cable "QHD lvds" + soldering an easy 4 pin jst "fan like" connector to the motherboard)

-> This version has NO MUX SWITCH between MXM slot and display. See the block diagram that shows this :

image.thumb.png.49dd333bc6a579f62564c270d25e54b3.png

 

The limit to bandwidth is signal integrity on the motherboard so 4K 100Hz+ should be doable, like on m6700 posts about 4K 105Hz on 51nb.

 

- LA-9772P is an "only eDP motherboard", like precision 7x10 and 7x20, to upgrade to 4k you just need the correct "4K eDP" display cable.

-> This version HAS A MUX SWITCH between MXM slot and display. See block diagram :

image.thumb.png.53e89ef0587112eb2f7b7c130d61fef4.png

 

It is the same mux switch as the Precision 7x10 and 7x20 so 4K at close to 100Hz possible as well just like @janepa showed.

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

Posted
57 minutes ago, JadeRover said:

 

Hello, this is very interesting, you connected a 4K eDP display to the eDP port of the laptop with this shielded flex cable ?

 

I also saw on 51nb forums that precision 7710/7720 (same for 7510 and 7520) could use a 120hz 4k eDP display downclocked to 105Hz through the mux switch. 105hz is with the MXM dPGU, if not with intel iGPU it is max 60Hz (can be overclocked a bit but not much).

 

The real limits on these systems is the mux switch that got better and better each generation, for example @DevilAnGeL mentionned on 51nb that the zbook 17 G6 could use 4K 144Hz display through the mux switch, the 7x10 and 7x20 systems have an older mux switch that tops out at around 100Hz @ 4K. Side note, my precision 7720 (downgraded to a 7710 motherboard) can drive my 1440p 165Hz no problem for close to a year now.

 

The "hardcore" method to get higher bandwidth to the display would be to:

- remove the mux switch and then solder the 4 pairs of eDP directly to the MXM slot for no limit on eDP version -> lose switch graphics ability + extremely hard to solder 8 small wires on a 5mm x 9mm footprint.

- replace the MUX switch with a newer one. However since the precision 7x10 and 7x20 have a QFN60 mux switch, there is no upgrade, newer mux switches are QFN66.

 

image.thumb.png.ddd86846f43bb9cd50b059a250c73013.png

Yes, I was really curious to see what the result would be. Since there are no microcoax cable on the motherboard’s PCB, I took a common flexible 40-pin ribbon cable and pushed it into the I-PEX eDP connector. The thickness and pin spacing are almost the right fit, it just takes a little practice. However, I didn’t succeed on the first try. On the second try, I wrapped this common flat cable with a aluminium foil and connected it to GND and voilà. I tested 110 Hz at 8-bit and 97 Hz at 10-bit at 2.7 GHz.

Alienware M18x R1 i7-2720xm-32GB-Adlink RTX5000

Alienware M18x R2 i7-3920xm-32GB-RTX4090 (still in testing) with the latest bios version. A14 specially modified updated and unlocked by me 😎

Asus ROG Zephyrus G14 AMD Ryzen 9 7940HS-32GB-RTX4060

 

Posted

Wow okay, That is promising, maybe I'll start thinking about making custom lcd cables if micro coax isn't required for 4K 100Hz !

 

Do you have pictures of the setup ? And also how did you connect the cable on the motherboard side, you also pushed in the flex cable ?

Actually maybe I read it wrong, you pushed the cable in on the LCD or on the Motherboard ?

Precision M6700 : i7-3740QM | P3000 6gb engineering vbios | 20gb DDR3 1600Mhz | FHD ips dreamcolor | delta fans

Zbook 17 g3 : i7-6820HQ -75mv | M3000m 4gb | 16gb DDR4 2400Mhz | FHD ips 

Precision 7720 : i7-6820HQ -80mv & 102.7mhz BCLK| Zotac GTX1060 6gb, 100w OC vbios | 16gb DDR4 3011Mhz |  1440p165hz (upgrad)

Zbook 17 g5 : i7-8850H, -140mv | P5200 16gb | 32gb DDR4 2666Mhz | FHD IPS

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use