Jump to content
NotebookTalk

SuperMG

Member
 View Profile  See their activity

  • Posts

    683

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Everything posted by SuperMG

  1. SuperMG
    The 4070 I bought had also "eDP" written but it didn't work as said. On Alienware eDP and Clevo eDP. Would probably have the same results on Dreamcolor displays.
  2. SuperMG
    I'll not run it on Alienware. It'll go on Clevo p570, had no issues with 4080 115W power limited thru Nvidia inspector. The 4090 I got is a 115W one and doesn't have any capacitors lying around the x-bracket's zone. The 4070 I have, doesn't have eDP. It doesn't work on M17X R4 and Clevo P570wm eDP displays. 4080/4090 have the connector present on the Nvidia control panel but they don't have eDP.
  3. SuperMG
    Actually you have the first commercial version. I'll get the newest one without the x-bracket issue. Look at their new pictures now
  4. SuperMG
    I already bought from them a 4090 115W. Thanks for mentioning the X-BRACKET layout. I told them to give me the right one!
  5. SuperMG
    I'll ask x-vision for a custom bracket. Surely they have one, how did they test the GPU then? I want to pass all the heatpipes on the bottom of the CPU socket. (front view of the motherboard). Then Connect the heatpipes to the copper plate of the GPU2.
  6. SuperMG
    So you're telling me, HP cards are superior in terms of eDP? My screen is pure-eDP, 120Hz, will all the RTX Turing from HP work? @nforce4maxyou also said you got an RTX Turing card to work on your M6800 with eDP with an HP card. Which version? C, D?
  7. SuperMG
    I saw that ADlink, GETEC, Pny and Aetina are all sharing the same ID of 1F76. So the VBIOS are all the same? And I can crossflash them for testing? I just want to get a very recent card for my eDP laptop. Currently slot one is running a P5200 and slot two is running a 4080
  8. SuperMG
    So it works on your laptop? What ID does AETINA uses? Same as GETEC? 1F76?
  9. SuperMG
    Which version do you have? HP Or Aetina? Ps: he has the HP one. But which vbios version do you have? Can I flash an HP VBIOS to an Aetina card? It's to use it as eDP on a Clevo 120Hz screen.
  10. SuperMG
    These cards don't have eDP support. Even tho on the Nvidia controller panel it shows the "EDP" port but it won't work with my eDP display from 2012.
  11. SuperMG
    Do the AETINA RTX Turing cards have eDP lines or not?
  12. SuperMG
    Hello. So it means all the Turing cards can output to eDP screen on your laptop? HP, Dell VBIOS too?
  13. SuperMG
    Hello. I wanted to modify my M18X R2 cooling capacity. I'll use 2-3 extra heatpipes. Connect all from the GPU1 heatsink to the GPU2 heatsink (empty slot) and have like 175W of heatroom. Both heatsinks combine 200W but since it'll take some times to transfer the heat, I knocked out 25W.
  14. SuperMG
    How do you get good temperatures with 175W of heat?? You should be at 95C with the 100-120W heatsink of the Alienware M18X!
  15. SuperMG
    No EDP compatibility on 4070,4080,4090.
  16. SuperMG
    Hello. Did you test if RTX 3000 from HP works too? If it works, it means all RTX 3000/4000/5000 work at the end. I can get the cards work on the first slot of my laptop and have better driver supports for RTX 7000 GPUs on the second slot on 3rd gen hahaha
  17. SuperMG
    Hello. I managed to bend the heatpipe but didn't glue it yet because I need to do some chassis mods. I also made a new post about the possibility to edit the 4080's vBios?
  18. SuperMG
    No space for one. I already use two GPUs in one system. I can just add one extra heatpipe, I tried to bend one, it's ugly but still manages to conduct the heat (hot water test). I bought 2 more heat pipes because mine modded one can't fit since I did something wrong in the first angle.
  19. SuperMG
    Do you see my heatsink? There's a place to add one heat pipe, I need to curve them like the first and second heat pipes. EDIT: Bruh I bought brass heat pipe... (Copper and some zinc)
  20. SuperMG
    Yes this one too. He used a rubber toy
  21. SuperMG
    I can't send a picture because of the limit but I have a place to add a 3rd heat pipe on the copper plate of the GPU die. I also have some margin to glue the heat pipe on the heatsink. I bought 3 18cm heatpipes because it's an enough length. I bought some thermal glue that works between -60C to 250C. I did see a video on how to bend a heat pipe with bare hands, but don't you guys have something safer and can be done for free?
  22. SuperMG
    I still haven't tried the 4070 (115W) on the Clevo P570WM but on my Dell Precision M6700 the temps were so high and the memory temps reached over 115C Do you guys think I should add a 4th heatpipe? I have 3 heat pipes. 2 for GPU and one for top VRAM/VRM
  23. SuperMG
    No all the RTX 4000 don't support eDP. 4070,4080 NO EDP!!! I get 255FPS on FurMark at 1080p with 120W limit. Still hits the thermal throttling at the end of the test but not by too much (95-100W)
  24. SuperMG
    And why mine has big gaps? If they all touch?
  25. SuperMG
    Eurocom told me to use a copper shim lol
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use