Jump to content
NotebookTalk

SuperMG3

Member
 View Profile  See their activity

  • Posts

    282

  • Joined

  • Last visited

 Content Type 

Everything posted by SuperMG3

  1. SuperMG3
    The laptop keeps shutting down 2 seconds after I power it. The LEDs light up. I "tested" the NVIDIA RTX 3080 MXM on my Clevo X7200. It was detected on the BIOS, I rebooted again, it was still detected and the laptop started to do the 2 beeps noise on the bios screen because I had 0 cooling on the GPU itself, it was a test to see if the GPU was in cause but no. I put back the Nvidia P5200 GPU and the X7200 still works... I maybe think the sata cable rekt the alienware's motherboard?
  2. SuperMG3
    Hello. My M18X R2 laptop was working fine. I got back my MXM card from X-Vsion. It booted and was detected on the bios as NVIDIA GFX but I forgot to connect the storage cable in order to boot to windows and test. After inserting the cable. The pc did 5 beeps (CMOS?), I restarted it and it did 7 beeps. How is that even possible? I removed the MXM GPU, still the same thing. I reset the CMOS but I still have the same issue. I removed the RAM, still 7 beeps or... It powers then shutdowns 2 seconds later... I removed the CPU, same 7 beeps. I replaced the CPU, same 7 beeps. I flashed by old bios backup to the Winbond bios chip, still the same issue. I never got the 5 beeps ever again. I tried holding the D button to get to the screen diagnostic test but it never happened. I removed the cmos battery and power it on again, it just powers on and shutdowns 2 seconds later, I heard no "5 beeps" By the way all of the LEDs are working when I start the computer... Rarely tho, the LEDs are off when doing the 7 beeps... So you're telling me a SATA cable destroyed my laptop? RESOLVED: Just buy a new motherboard at this point. If your computer doesn't do the right amount of beep when you remove the RAM (2 beeps) and CMOS (5 beeps) but instead does 7 beeps. Even does 7 beeps when you replace the CPU? The motherboard is toasted. Probably a PCH/Chipset problem. I maybe did toast the part where it controls the storage (northbridge?) From myself: It happened because of a silent short-circuit between the SATA port and SATA cable. Although the SATA cable works on my new motherboard...
  3. SuperMG3
    Hello. Did you manage to fix it? I remember I did get the full TDP consumptions. Let me explain how. The master GPU had no drivers, no default Nvidia drivers, just Microsoft basic. It allowed my slave card to run at a max of 127W. I need drivers on my master GPU so I can run at 1080p 😕 Let me know what do you think about my experiment.
  4. SuperMG3
    Hello. Let's go in private message
  5. SuperMG3
    Hello. Been 10 days chatting with them and now they tell me it's sold out 😕 If someone here has a P570WM, I can give you 1100 USD for it (barebones). So if you need some money or want to feed your family, come and send me an offer.
  6. SuperMG3
    Hello. It's on Alibaba but the sales team told me quickly that they have 0 MXM cards available.
  7. SuperMG3
    I think I need an Eurocom BIOS to get the module recognised. On eBay I bought that Crucial DDR3L 1600MHz 2Rx8 module for 25€. Originally, they cost between 50-80€... For proof, it says on their Alibaba page that they have more than 20 years of experience and all of their MXM cards are out of stock uh
  8. SuperMG3
    I found one for 25€ lol. I got one on hand. It's detected on HWINFO but the bios won't take it. (Clevo X7200)
  9. SuperMG3
    Peladn is here since 20 years ago too
  10. SuperMG3
    Isn't ZRT also a noname
  11. SuperMG3
    It's on Alibaba actually. They sell RTX 4060, 4070 all 60W
  12. SuperMG3
    The sales team are sleeping. One answer every 12 hours insane. How do people get jobs but can't do them properly. I don't even think there's a lot of people who are mailing them, I'm probably the only one right now for sure. I mean I answer them as soon as I get their mail but they ghost me for 12 hours until I get an answer. It's just a generic looking answer. I told them 4 times to send me pictures and they don't even do that lmao
  13. SuperMG3
    Hello okay. Do you have any experiences on PELADN MXM GPUs? They also sell RTX Ampere for a cheaper price. If so, possible for you to dump the vBios and upload it?
  14. SuperMG3
    @panda_zzzHello. Did you manage to get your RTX 4060 MXM to work on your Dell Precision M4800 and on your M17X R4? I found another manufacturer called PELADN. They make cheaper RTX 4060 and 4070 MXM cards.
  15. SuperMG3
    Hey. Did you guys test any PELADN cards? @ssj92. They are much cheaper than X VISION
  16. SuperMG3
    I do but they do make NPC responses. I told them 900-1000 USD with shipping, barebones, with heatsinks only.
  17. SuperMG3
    @Clyde @ssj92 Hello got some news from Eurocom. 1850 USD for a P570WM.. Xeon E5 2670 16GB RAM GTX 675M 750GB HDD What the heck is that pricing...
  18. SuperMG3
    You're lucky. I only have a X7200 with GeForce 485M + Quadro P5200. Since NVIDIA drivers are weird, I'm limited at 70% of power. The P570WM can use a more recent 10 cores CPU and the master MXM slot can display upto Nvidia Maxwell instead of Kepler... I can buy an used P570WM for 750USD if interested. (NO CPUs, no GPUs)
  19. SuperMG3
    @DreDre2022hello. Eurocom told me they sold their last one, what an unlucky... They sold it for 1500USD barebones, what the...
  20. SuperMG3
    My HD 7970M doesn't work... Blackscreen... I tried the P270WM vbios by replacing the P150 one and it's still the same issue, not work... I'll just rebuy a HD 5870M since I found a X7200 VBIOS for it so no more "instant shutdown" situations?
  21. SuperMG3
    Possible VRAM bandwidth related speed?
  22. SuperMG3
    I still don't understand one thing though. You're getting full power of your RTX 3000/5000 with 880M + 3000 combo but... M2000M + 3000/5000 you are getting power limited. How does that happen?
  23. SuperMG3
    How did this one made your error 43? Did you flash another VBIOS from another manufacturer? Can't you edit the original vbios for higher TDP?
  24. SuperMG3
    Eurocom are expensive as heck. Just for two GTX 980M you have to pay near a thousand
  25. SuperMG3
    So increasing the power limit in the vBios didn't work for you?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use