Maro97

hello ..... i dont know if this lcd fully function with rtx 30xx i use it only with gtx 1070 and the boot logo fixed by flashing other gpu vbios

yes it is 🙂

Hellblade 2

Just found this amazing item on AliExpress. Check it out! $26.00 | Clevo P750/1DM P775 P770 P870 LCD cable for B156ZAN05.1 B173ZAN03.3 6.9 4K/120/144Hz B173HAN05.0/1/2 FHD/240/360Hz EDP 0.4/5mm https://a.aliexpress.com/_msi3UVc

B173ZAN06.C is the best laptop led until this moment it's faster than B173ZAN03.3 it's 3ms G to G but B173ZAN03.3 120hz 4k is 8ms G to G and the color accuracy is best than 120hz led ..... i advice to buy B173ZAN06.C you can find it on ebay. dont forget to buy a 0.4 (signal interface pin pitch) 40 pin cable if you buy B173ZAN06.C but if you buy B173ZAN03.3 you will use 0.5m ( signal interface pin pitch) 40 pin cable 30cm length..

thanks developer79 appreciate

Thanks runix18 for helping me to solve my issue the KBC / EC frimware version appers in bios i flashed latest dsnake bios by FPT method without to flash stock bios appreciate

how many EC must flash ? to my knowledge flashtm method and fpt bios only those can be flash it , right ?

and i have P870TM-0716-9900KS-128G bios can i use it with 8700k & 32gb ram & gtx 1070 ?

you said Reflash both EC and revert to last version stock bios , with spi programmer or by stock methods ?

what is your idea to fix this ?

I flashed it without laptop battery shall i flash it againe with laptop battery installed or not ?

i flashed it to EC10710 but not apppers into BIOS by FLASHTM meathod , and i wonder is that the last EC Frimware for clevo p870tm ?

yes everything works fine except the keyboard lighting , the colors when changed are different from what i choose .... my ec frimware is EC10710 but i dont know why it not showen in bios ?

i wonder why the KBC/EC Firmware Revision is N/A what this mean ? and what this firmware responsibility (KBC/EC) ?

where did you get prema BIOS support 9900ks & rtx 3080 ?

Special thanks to Rainer124 and developer79 i appreciate all their help , whether it ideas or information … thanks guys

and now let’s play the calisto protocol … 🫣

The long one is a new one i bought the short one is stock

I have gtx 1070 vbios device id is 1BE1 it’s gsync gpu must flash anothe bios same this device id the old vbios version is 86.04.56.00.1D flashed to 86.04.88.00.29 then 💥 the lcd works outside windows can go into bios and safe mode and logo appears