Jump to content
NotebookTalk

Maro97

Member
 View Profile  See their activity

  • Posts

    168

  • Joined

  • Last visited

 Content Type 

Everything posted by Maro97

  1. Maro97
    This vbios version fixed my 1070 issues
  2. Maro97
  3. Maro97
    This is the latest vbios version of clevo gtx 1070 it’s build in 2018 it’s 125w
  4. Maro97
    did you solve the issue ?
  5. Maro97
    flash this vbios for each cards but before do it keep a vbios backup file in a usb GP104.rar
  6. Maro97
    the vbios of each cards is the same ?
  7. Maro97
    try each card separately without the other in a master slot without OC to determine the broken card if you do all of this and two cards works great on a master slot and the problem remains the same , can you send a pic of the cards in their ports with the thermal pads on them you may have forgotten parts of the components of the pcb slave card the must be cooled ? and a pic of the heatsink, of course without thermal pads on the copper side ?
  8. Maro97
    can use it with p870TM with modded heatsink ?
  9. Maro97
    I think… No it can’t support rtx 3080 as you can see the gpu photo you have 3 vram areas not two areas if you use rtx 3060 may be can use this heatsink
  10. Maro97
    Find above 4G decoding in bios and make it enabled then the resizable bar will shown then make it enabled but it works only with rtx 30xx gpu https://youtube.com/shorts/ltDVVP0iqC0?si=lxJlUwzWMc0D6o5F
  11. Maro97
    Maybe the sli cable is broken try another one
  12. Maro97
    Special thanks to devolper79, who gave new hope to the P870 laptop with a modified heatsink to support all GTX 10xx - RTX 30xx graphics cards. Thank you very much, and soon when the heatsink arrives, I will do a full review with the RTX 3080.
  13. Maro97
    Blind bios technic will solve that issue 👍
  14. Maro97
    Clean the ram slot and the ram pins then try
  15. Maro97
    2 Beeps on Dell Studio 540 indicates Memory or Memory slot failure. I would suggest you to remove and reseat the memory on the system to check if the beep codes disappear. If two or more memory modules are installed, remove the modules, then reinstall one module and restart the computer. If the computer starts normally, continue to install additional memory modules (one at a time) until you have identified a faulty module or reinstalled all modules without error.
  16. Maro97
    So the blind bios will be the cure
  17. Maro97
    But i can see in video the MOBO is not bricked it is still alive
  18. Maro97
    I don’t know how you can use the spi programming tool cuz i don’t know where is exactly location the EC and BIOS chipset cuz the blind flashing can fix many issues like that
  19. Maro97
    Download the original Alienware unmodded A03 bios from Dellat Drivers and Downloads | Dell [united States] The file is named "M18R2A03WIN" Extract the contents of M18R2A03WIN to a new folder named "Alienware recovery" anywhere on your useable computer. In there you should have a bunch of files. (9 in total) Look for the one called QBR10EC.fd Rename this file to M18R2.hdr Place the file M18R2.hdr on a formatted fat32 usb stick on its own. Thats it. Blind created Recovery process: To do the recovery process you need to remove your m18x r2 battery. Unplug the back power cord as well Plug the usb stick with the file M18R2.hdr in the M18X's e-sata port Now hold down the END key (located above the numbers key pad) at the same time while your holding the END key plug in the power cord only, you will hear the fans turn on full bolt. Release the end key and wait After a few seconds once the file is read from the USB stick you will hear 20 or 30 beeps (sounds like a garbage truck reversing) After the beeps stop the m18x will shut down and reboot itself. ( 1 or 2 times depending) Once reboot all will be back to normal A03 bios. Connect the battery back if you wish after successful boot.. That's all folks, things should work now unless you bricked the EC controller, which is hard to do.
  20. Maro97
    You can use a blind BIOS theory
  21. Maro97
    Yes it’s compatible
  22. Maro97
    Aha okay … i understand your theory right now
  23. Maro97
  24. Maro97
    And in your read of the tester 4.84v x 2.16A = 10.4w for only one usb port so you need the cable with 2 double usb to 1 type c which i sent and the wled which i sent a link to you needs 9.34 to 11.97 W
  25. Maro97
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use