ViktorV

Initialization does not pass, one of the components is faulty. It does not reach the supply of power to the processor.

Judging by the behavior, it's not the BIOS, it's more like a video card or processor malfunction. Also, this behavior can cause a malfunction in the cooling system fan.

Have you tried running without a graphics card?

If the situation does not change, then remove the video card and try starting without it.

Remove all unnecessary equipment, leave only one bar of RAM, processor and video card, try to start the laptop. Write down what happens.

ne173qhm-nz1/2/3 2k 240Hz and ne173qum-ny1 4k 144Hz EDP 40pin 0.5mm

This behavior can cause Fan Control from Clevo Control Center, try removing this software.

You can) but the question remains the length of the cable.

Смотри, что есть на AliExpress! Проводной радиатор Clevo P750/1DM P775TM P770 P870 B156ZAN05.1 B173ZAN03.3 4K/120Hz B173HAN05.0/1/2 FHD/240/360Hz EDP 0,4/5m LCD за 1 821,05 руб. https://sl.aliexpress.ru/p?key=2C89mH

Yes, you can install this panel on your 775, but as I wrote earlier, the connector is on the other side, and if my memory serves me right, then there is a 0.4mm 40pin edp connector.You can fix the panel using double-sided tape, before centering it on the frame.

K5pro and K9pro are not a very good choice, they do not remove heat well. The best liquid thermal pads are laird.

Look

Looked. 0.5mm 40pin EDP connector, standard connector for Clevo p870/775/750 laptops, there is a nuance, the connector on these displays is located on the opposite side of the standard matrices and therefore you will need a long 40pin EDP display cable, for p870 you can use the cable from p775 , it is initially long.

Wrong) b173han05.1. But b173han03.3 also works, checked. Now I'll see what kind of connector is on it, 0.5mm or 0.4mm

I also installed a B173HAN03.1 FHD 300Hz display. You can also install 2k 165HZ ne173qhn ny2 and 4k 120Hz b173zan03.3.

Do not look at the stock values of this processor))) mine runs at a frequency of 5 gigahertz in single thread and 4.3 gigahertz in multi-thread, pl1 125w and pl2 175w, undervolt -125 millivolts for the core and cache.

No

It'll do just fine.Pin mod is not needed on the mutant. It is for information only .From memory, take SK Hynix 2133Mhz, it works well with this processor. Then you can overclock it to 2666Mhz. I managed to overclock it to 2933Mhz, it also took 3000Mhz, but it did not work stably.

QTJ1 is more stable with memory selection than QTJ0. I have both processors. They are essentially the same, they differ only in stock frequencies, but it doesn't matter because you won't use them at stock frequencies anyway.

This is a mutant processor, a mobile i9-10980hk ES (QTJ1) soldered on a lga1151v2 substrate. An excellent processor, but very picky about memory bars, it does not start with all. Works confidently with SK Hynix 2133Mhz RAM, successfully overclocks to 2666Mhz after launch. Also, to run this processor, you will need a Dsanke 9900KS 128g bios.

rtx3060 in Clevo p870tm with QTJ1(i9-10980hk ES)

Gallery of modifications Clevo p870tm

T-radiator with rtx 3080 on Clevo p870tm. Effectively cope with this video card.

🤣🤣🤣🤣Cool.But in fact, these bios are no longer shown by Prema, since they have undergone changes. I don’t sell heatsinks for p870, but I just decided to help in obtaining them without having any benefit from this. Well, although perhaps the option for 800 euros is more successful for you)) ))And there was a golden time when Prema bios were free and distributed freely, what has changed since then....?

This radiator is made to order. I ordered several more of these radiators for my clients. So, in principle, you can solve the issue with the order if someone needs it. But write it in a personal. I used the search in the branches but did not find a separate topic of Clevo p870 owners, which is very strange, because this is a fairly popular line of Clevo laptops. I think we need to fix this!)))