*Official Benchmark Thread* - Post it here or it didn't happen :D

[Mr. Fox]

20 hours ago, Mr. Fox said:

Definitely power-limited. There is no point in repeating these benchmarks without a shunt mod because it's maxed out on the power budget now.

I only need two, but I will have spares. I am going to try the Jufes no detection easy reversal sneaky technique this time instead of solder and see how that works. If it doesn't I can always solder it after the fact. If we eventually get a 1kW XOC vBIOS leaked then I can just peel them off without a trace and without any effect on the warranty. If it works well I will send you a couple for your 5090 @electrosoft

 

https://www.mouser.com/ProductDetail/755-PMR100HZPFV2L00

 

[electrosoft]

So strange a few days ago to see 5090FE's available on Best Buy almost all day with the, "See Details" button blue before they eventually sold out. I didn't want one (explained below), but still good to see. Makes sense considering in the EU they are actually being discounted now a bit in certain regions.

 

------

 

I'm definitely locked onto the Jonsbo Z20 MATX portable case now after seeing it can fit even an Astral 5090 in it:

 

Check out the temps which are great too.

 

 

Astral has almost the exact same dimensions as a Vanguard 5090. This case was in my top 3 before but after seeing it can fit a Vanguard 5090 sized card and actually seeing it in action here at Quake Con from a gent in the BYOB line, I'm sold on it. It seems damn near perfect and checks all the boxes..... plus it's only $99.99 now. I especially like the no riser design.

 

 

Timestamped with gent in line.....

 

It can handle monster quad slot behemoths like the Astral, Vanguard and more. Looks like a fun case to play around with too.

 

---------------------------------------------------------------------------------------

20 hours ago, Mr. Fox said:

I figured I had better do it while I had the wild hare up my butt or I'd end up deciding it wasn't worth the effort. 🤣 I wheeled everything into the living room and benched from the comfort of my recliner.

 

Definitely power-limited. There is no point in repeating these benchmarks without a shunt mod because it's maxed out on the power budget now. But the clocks are holding a lot higher with the chilled water. These were pulling less than 1.000V under load. +300 core offset. I will have to order the resistors Brother @tps3443 mentioned since all of my spares are too high resistance. Travis do you have a link where you bought yours? Digi-Key or Mouser?

Speedway - https://www.3dmark.com/sw/2656446 | https://hwbot.org/benchmarks/3dmark_-_speed_way/submissions/5888556
 Steel Nomad (DX12) - https://www.3dmark.com/sn/8377250 | https://hwbot.org/benchmarks/3dmark_-_steel_nomad_dx12/submissions/5888557

Steel Nomad (Vulkan) - https://www.3dmark.com/sn/8377374 | https://hwbot.org/benchmarks/3dmark_-_steel_nomad_vulkan/submissions/5888558?

Port Royal - https://www.3dmark.com/pr/3623727 | https://hwbot.org/benchmarks/3dmark_-_port_royal/submissions/5888560?

Solar Bay - https://www.3dmark.com/sb/367617 | https://hwbot.org/benchmarks/3dmark_-_solar_bay/submissions/5888561?

Solar Bay Extreme - http://www.3dmark.com/sb/367638 | https://hwbot.org/benchmarks/3dmark_-_solar_bay_extreme/submissions/5888562

Time Spy - https://www.3dmark.com/spy/58438069 | https://hwbot.org/benchmarks/3dmark_-_time_spy/submissions/5888565

Time Spy Extreme - https://www.3dmark.com/spy/58438160 | https://hwbot.org/benchmarks/3dmark_-_time_spy_extreme/submissions/5888567

 

8 hours ago, Mr. Fox said:

https://hwbot.org/benchmarks/cinebench_-_r23_multi_core_with_benchmate/submissions/5888802

 

4 hours ago, Mr. Fox said:

OK I think I am done now

 

Fire Strike - https://www.3dmark.com/fs/33747306 | https://hwbot.org/benchmarks/3dmark_-_fire_strike/submissions/5888849
 
Fire Strike Extreme - https://www.3dmark.com/fs/33747317 | https://hwbot.org/benchmarks/3dmark_-_fire_strike_extreme/submissions/5888851

Fire Strike Ultra - https://www.3dmark.com/fs/33747324 | https://hwbot.org/benchmarks/3dmark_-_fire_strike_ultra/submissions/5888853

 

 

Chiller mode ACTIVATED...

 

The Mrs. was ok with a living room benching session? 😁 My wife gives me deliberate side eye when I start to use the dining room table for projects.....

 

45 minutes ago, Mr. Fox said:

I only need two, but I will have spares. I am going to try the Jufes no detection easy reversal sneaky technique this time instead of solder and see how that works. If it doesn't I can always solder it after the fact. If we eventually get a 1kW XOC vBIOS leaked then I can just peel them off without a trace and without any effect on the warranty. If it works well I will send you a couple for your 5090 @electrosoft

 

https://www.mouser.com/ProductDetail/755-PMR100HZPFV2L00

 

 

Looking real good! Once that shunt is in place that Zotac is going to really start to sing full volume....

 

lol, me and shunting.... 🤣 Right after @Papusan and @Talon shunt theirs first. 🙂

 

 

14 hours ago, Papusan said:

 

This what you said while Intel almost say Core Ultra (Arrow Lake) was a failure as desktop chips 😎 You and Intel's CFO can't both have correct brother, LOL

 

One of you has to be wrong😂

 

As you know, we kind of fumbled the football on the desktop side, particularly high performance desktop side. So we’re as you kind of look at share on a dollar basis versus a unit basis, we don’t perform as well and it’s mostly because of this high end desktop business that we didn’t have a good offering this year.

 

Intel Confirms Arrow Lake Weakness, Bets on Nova Lake to Compete With AMD Zen 6

 

At the Deutsche Bank Technology Conference in 2025, Intel’s CFO David Zinsner explained that the company sees Arrow Lake as a step that didn’t quite hit the performance target for high-end desktops.

 

Well, he clearly is talking the general (m)asses that didn't take the time to properly tune it.

 

It is 13th vs 7800X3D all over again. Everybody screaming X3D superiority among the general end users and channels, and when I decided to tune them both up, guess what? 13900KS made massive performance improvements and the 7800X3D marginally so since its main strength lies in that cache.

 

I'm not saying an Ultra 285k is going to slay a 9800X3D, but it can definitely gain a lot of ground when properly tuned. I'm just fighting the urge to do it all over again like before because that itch is picking up..... 

[Mr. Fox]

1 hour ago, electrosoft said:

Chiller mode ACTIVATED...

 

The Mrs. was ok with a living room benching session? 😁 My wife gives me deliberate side eye when I start to use the dining room table for projects.....

No she would not be. But, she is in WA visiting relatives and friends. I have 2 more weeks of having free reign of the house and then I will have to retreat to my hot little laboratory.

 

The dining table seems to be a universal taboo with the ladies. If I scratch it that is the end of the world. If the grandkids scratch it, that is adding "character" to the table, LoL. 🤣

[Mr. Fox]

Ooops. No chiller on this one. Voltage got higherwith the comparatively elevated temperature.

https://hwbot.org/benchmarks/cinebench_-_r23_multi_core_with_benchmate/submissions/5889007

[Papusan]

 

Hmmm. What can go wrong if you go cheapo?...

 

The documented case on Reddit should therefore not be viewed as an isolated incident, but rather as the direct consequence of a design weakness that is likely to be systematically present throughout the series.

 

https://www.igorslab.de/ursachenforschung-kondensatordefekt-auf-einer-pny-rtx-5070-mit-ansage-und-vorheriger-warnung/

 

Then we have the much more expensive 5090s from PNY goes booooom. Good components doesn't mean a shit if the design isn't up to par. Asus is greedy bastards but they can eletrical design.... Just too expensive for what you get. Same with Galax/KFA2's better cards.

https://www.guru3d.com/story/geforce-rtx-5090-goes-boom-pny-gpu-suffers-capacitor-failure-near-16pin-connector/

 

The Intel.... i mean the AMD moment. Also why you see Nvidia is so restricted with their boost throttling algo at awful low temperature. The silicon can't handle die shrink with reasonable voltage. Throttle the boost clocks below 40C will be the next for processors. Chips that handle 82-100C is for the older days. 

 

https://videocardz.com/newz/same-user-loses-another-ryzen-7-9800x3d-on-asrock-motherboard