Bidelloman Posted April 18 Share Posted April 18 it should be plug and play regardless. The issues which require modding are Gsync and Dynamic Boost, apparently by modding the .inf driver Link to comment Share on other sites More sharing options...
MaxxD Posted April 19 Share Posted April 19 On 4/18/2024 at 4:54 AM, Bidelloman said: it should be plug and play regardless. The issues which require modding are Gsync and Dynamic Boost, apparently by modding the .inf driver Failed to execute? Doesn't the forummate answer anyway? I would be interested in the final result... 🤔 Is there a picture of the correct water Heatsink Thermal Pad Thickness Application for RTX 3080 GPU Card? I found one that is a bit incomplete, but the real size would be important. Previously linked (Ali image) contains inappropriate markings. The question is, in the now shared image, what is the real mm thick in the nominated places? ◄►Clevo® X170SM-G + AIO Water System►Win10 & 11 x64 Pro "Dual Boot" System◄►+ Pioneer®BDR-209EBK + RaidSonic®ICY BOX IB-550STU3S►LG®OLED55C9PLA "4K" 120Hz G-Sync 1MS►HP®DeskJet GT 5820 (X3B09A)◄►*.* Link to comment Share on other sites More sharing options...
Bidelloman Posted April 23 Share Posted April 23 Ah, my own 3080 just arrived, looks good on visual inspection, signs of wear appear on the memory chips' writings, some of them are faded. Pity I cannot test the gpu because the heatsink I received was bent and thus unusable. They also send you gpu cable and the big pad that sits under it Link to comment Share on other sites More sharing options...
win32asmguy Posted April 23 Share Posted April 23 30 minutes ago, Bidelloman said: Ah, my own 3080 just arrived, looks good on visual inspection, signs of wear appear on the memory chips' writings, some of them are faded. Pity I cannot test the gpu because the heatsink I received was bent and thus unusable. They also send you gpu cable and the big pad that sits under it Glad to see another 3080 mobile upgrade in the works! Mine has the same wear on the memory and its fine. I think its just an effect of the thermal pad grease at normal operating temperatures. Your current GPU should look the same way. My intial heatsink I ordered from RJTech / Sager was also bent upon arrival. I had to take many photos of the box and heatsink and they sent another out which arrived a week later that was actually double boxed and not bent. It was still faster than other options due to chinese new year going on at the time. Clevo X170SM - 10900K, 32GB DDR4-2933 CL17, 4TB WD SN850X, RTX 3080 mobile, 17.3 inch FHD 144hz, System76 open source firmware, Windows 10 Pro 22H2 Clevo X370SNW - 13900HX, 64GB DDR5-5600 CL40, 4TB Samsung 990 Pro, RTX 4090 mobile, 17.3 inch FHD 144hz, System76 open source firmware, Windows 10 Pro 22H2 Link to comment Share on other sites More sharing options...
Bidelloman Posted April 23 Share Posted April 23 34 minutes ago, win32asmguy said: Glad to see another 3080 mobile upgrade in the works! Mine has the same wear on the memory and its fine. I think its just an effect of the thermal pad grease at normal operating temperatures. Your current GPU should look the same way. My intial heatsink I ordered from RJTech / Sager was also bent upon arrival. I had to take many photos of the box and heatsink and they sent another out which arrived a week later that was actually double boxed and not bent. It was still faster than other options due to chinese new year going on at the time. indeed, i thought the same, my own 2080s also has similar wear on the memory chips. i got it from amazon from a third party seller, and they said they won't have another heatsink ready for 40 days..if anyone has links for decent prices, I would appreciate the PMs. Mostly because I want to test the 3080 as I do not have a lot of time before I can send it back in case it does not work. another weird thing is that the gpu is listed coming from the US, yet there's a label that says hong kong and an address there...k Link to comment Share on other sites More sharing options...
MaxxD Posted April 23 Share Posted April 23 3 hours ago, Bidelloman said: Ah, my own 3080 just arrived, looks good on visual inspection, signs of wear appear on the memory chips' writings, some of them are faded. Pity I cannot test the gpu because the heatsink I received was bent and thus unusable. They also send you gpu cable and the big pad that sits under it I just ordered one. I'll give it a try, I hope it works! 😄 1 ◄►Clevo® X170SM-G + AIO Water System►Win10 & 11 x64 Pro "Dual Boot" System◄►+ Pioneer®BDR-209EBK + RaidSonic®ICY BOX IB-550STU3S►LG®OLED55C9PLA "4K" 120Hz G-Sync 1MS►HP®DeskJet GT 5820 (X3B09A)◄►*.* Link to comment Share on other sites More sharing options...
Meaker Posted May 6 Share Posted May 6 On 4/23/2024 at 4:24 PM, MaxxD said: I just ordered one. I'll give it a try, I hope it works! 😄 If it's from the same source others have it should. Mine has had a hundred or so hours of load and no issues so far. Sager NP9877 Hybrid Watercooled setup, D5 pump with dual 140MM fans integrated into custom stand. All controlled via temp outputs from GPU and CPU. 17.3" 1440p 120Hz display + 32" 4k MSI IPS 160Hz display 9900KS @ 4.8Ghz (47x102Mhz) All core, delid with rockit IHS, liquid metal RTX 3080 @ 1920/8000 shunt mod 32GB (16x2 dual rank) 3280Mhz DDR4 CL16 1TB SM961 SSD 2TB SN770 SSD Dual 330W PSU Link to comment Share on other sites More sharing options...
Bidelloman Posted May 7 Share Posted May 7 Apparently my pc decided it was time not to ever boot without it being plugged in to the wall. It flashes and then turns off, only with AC power it turns on and it says there's been an nvram reset, so bios reset and everything. Is it me or the CMOS battery is dying? Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 12 minutes ago, Bidelloman said: Apparently my pc decided it was time not to ever boot without it being plugged in to the wall. It flashes and then turns off, only with AC power it turns on and it says there's been an nvram reset, so bios reset and everything. Is it me or the CMOS battery is dying? Yeah possible cmos Link to comment Share on other sites More sharing options...
Bidelloman Posted May 7 Share Posted May 7 Well, it lasted 4 years.. Where can I get another? third party or should I contact my own clevo seller? 1 Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 Alright guys the long awaited update. watercooled heatsink is amazing if used as watercooler. With air its not better then stock/worst. But boy with watercooling connected the temps are truly amazing, never above 60 degrees celcius and the fans dont even spin! im using cryosheet on gpu/cpu and arctic tp-3 thermal pads. the 3080 is just plug n play, u only need to edit .INF for nvidia drivers. Tdp 165w and gsync works. heres the pictures 3 Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 1 minute ago, Bidelloman said: Well, it lasted 4 years.. Where can I get another? third party or should I contact my own clevo seller? Just thirth party. 3v battery is 3v. u cud make sure its ur battery if u measure its voltage Link to comment Share on other sites More sharing options...
Bidelloman Posted May 7 Share Posted May 7 52 minutes ago, Pfudaniel said: Just thirth party. 3v battery is 3v. u cud make sure its ur battery if u measure its voltage fair point, however everything I saw thus far indicates that. The main battery is fine, 7% wear which isn't bad considering it also is 4 years old and works fine. Also reflashed bios and EC(thus disabling Dsanke's bios unlocker) to make sure everything is fine software wise. Thank you for the updates, looking forward for that .INF driver and what to do with it! Link to comment Share on other sites More sharing options...
Bidelloman Posted May 7 Share Posted May 7 Well, apparently just replugging the cmos was sufficient to fix it, good to know Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 2 minutes ago, Bidelloman said: Well, apparently just replugging the cmos was sufficient to fix it, good to know Great! to edit .inf file from nvidia instaler u can find many videos on youtube Link to comment Share on other sites More sharing options...
Pfudaniel Posted May 7 Share Posted May 7 I wanne upgrade my screen to 1440p. is there a compatible 1440p 240hz screen for the x170? Link to comment Share on other sites More sharing options...
Bidelloman Posted May 7 Share Posted May 7 1 hour ago, Pfudaniel said: I wanne upgrade my screen to 1440p. is there a compatible 1440p 240hz screen for the x170? pretty sure options included the base 1080 144hz, 1080 240hz and then the 4k 60hz Link to comment Share on other sites More sharing options...
MaxxD Posted May 7 Share Posted May 7 4 hours ago, Pfudaniel said: Alright guys the long awaited update. watercooled heatsink is amazing if used as watercooler. With air its not better then stock/worst. But boy with watercooling connected the temps are truly amazing, never above 60 degrees celcius and the fans dont even spin! im using cryosheet on gpu/cpu and arctic tp-3 thermal pads. the 3080 is just plug n play, u only need to edit .INF for nvidia drivers. Tdp 165w and gsync works. heres the pictures Congratulations and I wish you good use! He's on my way and arrives soon. I still have to wait for replacement. They brought home from the hospital today and recovered after surgery. On Friday, they will take full rehabilitation after surgery. I spend 3 weeks there.😬 I knew how good the water cooling on the X170 machine, I wouldn't replace anything...right now!☝️👍☺️😄 ◄►Clevo® X170SM-G + AIO Water System►Win10 & 11 x64 Pro "Dual Boot" System◄►+ Pioneer®BDR-209EBK + RaidSonic®ICY BOX IB-550STU3S►LG®OLED55C9PLA "4K" 120Hz G-Sync 1MS►HP®DeskJet GT 5820 (X3B09A)◄►*.* Link to comment Share on other sites More sharing options...
MaxxD Posted May 9 Share Posted May 9 The courier brought it today. I was very surprised that he arrived so quickly from thousands of kilometers away. Unfortunately, I have no surprise to try. I'm over a serious surgery, now 3 weeks of rehabilitation / medical hospital awaits me and maybe then. Until then, he rests in his box, Esd's foil. Excellent packaging! 😉😀👍😎 3 ◄►Clevo® X170SM-G + AIO Water System►Win10 & 11 x64 Pro "Dual Boot" System◄►+ Pioneer®BDR-209EBK + RaidSonic®ICY BOX IB-550STU3S►LG®OLED55C9PLA "4K" 120Hz G-Sync 1MS►HP®DeskJet GT 5820 (X3B09A)◄►*.* Link to comment Share on other sites More sharing options...
Bidelloman Posted May 10 Share Posted May 10 https://youtu.be/8igM5DcTukw i'm soon switching to my 3080, as soon as my heatsink gets here. will this be necessary if I use DDU and NVCleanInstall? Link to comment Share on other sites More sharing options...
MaxxD Posted May 13 Share Posted May 13 Someone could do a few tests between 2080s and 3080 what is the difference. Or just what the 3080 gpu knows. Little teaser for those who would switch to 3080! ☝💪😁 /3DMark FireStrike, TimeSpy, "Normal & Ultra" etc..etc../ ◄►Clevo® X170SM-G + AIO Water System►Win10 & 11 x64 Pro "Dual Boot" System◄►+ Pioneer®BDR-209EBK + RaidSonic®ICY BOX IB-550STU3S►LG®OLED55C9PLA "4K" 120Hz G-Sync 1MS►HP®DeskJet GT 5820 (X3B09A)◄►*.* Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now