Jump to content
NotebookTalk

Official Clevo X170KM-G Thread


electrosoft

Recommended Posts

It looks like, if found the solution for the uncontrolled shutdowns. I disabled C-State a week ago. Since it's disabled - no shutdown 🙂

  • Thumb Up 2
  • Bump 1

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

@crossshot what is the side effects of disabling C-States ?

{Main System:} The Beast

Spoiler

{Cooling:} Corsair H170i Elite

{Mainboard:} Asrock X670E Pro

{CPU/GPU:} AMD Ryzen R9 7900x3D / AMD RX 7900 XTX (Asrock Phantom)

{RAM/Storage:} 2x 16GB DDR5 Corsair Vengeance 6400MT/s , 13TB WDD SN850X 2x4TB, 2x 2TB, 1x 1TB

{PSU/Case:} Corsair RM 1000x V2, Corsair 7000D Airflow (Black)

{OS:} Windows 11 Pro

 

Realtek Nahimic 3 Modded Driver for MSI Systems:Latest
 

Link to comment
Share on other sites

2 hours ago, solidus1983 said:

@crossshot what is the side effects of disabling C-States ?

No uncontrolled shutdowns 😂

 

I don't feel any difference. Maybe Idle power consumption is higher but who cares 💁‍♂️

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

1 hour ago, bca009 said:

My laptop will not post black screen no black lights,shut off after 30 seconds

fans spin up,rgb works 

Remove all ram modules and stick only one under the backcover. 

And there is a GPU reset shortcut. But i don't know it. FN+D or ALT+D. Maybe someone know it.

 

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

15 hours ago, solidus1983 said:

@crossshot what is the side effects of disabling C-States ?

The CPU draws more power because it doesn't enter power saving modes. To put simply, the voltage supplied to the CPU doesn't change and is static unless it is throttling or something like that.

 

All of the above means more power draw when idle, some tasks that might have drawn very little power might draw a lot for no particular reason and the CPU on average runs hotter.

 

This can help with stability though. Even when doing heavy undervolting.

  • Thumb Up 1

Clevo P775TM1-G:

Spoiler

GPU: NVIDIA GeForce RTX 3080 Laptop (165W, +110MHz Core, +350MHz Mem)

CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -130mV, 255A, 200W PL1/2, C0 only)

RAM: 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v)

Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0)

Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3)

Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E)

Display 1: AU Optronics B173ZAN0.10 (4K, 60Hz)

Display 2: ROG STRIX XG17AHP (1080, 240Hz, G-Sync, DP)

Wi-Fi/BT: Killer(R) Wireless-AC 1550 (9260NGW, PCI-E)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo ThinkPad T540p:

Spoiler

GPU1: Intel(R) HD Graphics 4600

GPU2: NVIDIA GeForce GT 730M (+135MHz Core, +339MHz Mem)

CPU: Intel(R) Core(TM) i5-4210M

RAM: 16 GB (1600MHz, 2x8)

Storage: Samsung 860 Pro 256GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo IdeaPad E31-70:

Spoiler

GPU: Intel(R) HD Graphics 5500

CPU: Intel(R) Core(TM) i3-5005U

RAM: 4 GB (1600MHz, 1x4)

Storage: Kingston SA400 128GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

Link to comment
Share on other sites

Here a good discription of the C-State modes

 

https://www.dell.com/support/kbdoc/de-de/000060621/what-is-the-c-state?lang=en

 

Disabling C-State for the X170KM-G is only possible with unlocked BIOS.

PXL_20230315_215326840.jpg

  • Thumb Up 1

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

4 minutes ago, tennic said:

So, if I disable this setting no more BSOD's occur when overclocking is enabled? (although not actually used)? Thanks😉

I don't know it, but thats also my thoughts. Try it for us.

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

 

11 minutes ago, crossshot said:

I don't know it, but thats also my thoughts. Try it for us.

 

I will try this setting, to see if it solves the problem 😉

Problem which however, in my case, is caused by the Control Center, i.e. when I activate the overclock in the BIOS, the "overclock" tile appears in the Control Center, and this component causes the Windows BSOD.
Without Control Center no BSOD occurs

Link to comment
Share on other sites

That's the C-State options in the unlocked bios. Maybe i'll try to play with the settings, to keep C-State enabled

PXL_20230316_122223970.jpg

PXL_20230316_122237614.jpg

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

7 hours ago, srs2236 said:

The CPU draws more power because it doesn't enter power saving modes. To put simply, the voltage supplied to the CPU doesn't change and is static unless it is throttling or something like that.

 

All of the above means more power draw when idle, some tasks that might have drawn very little power might draw a lot for no particular reason and the CPU on average runs hotter.

 

This can help with stability though. Even when doing heavy undervolting.

 

The Clevo laptops draw a lot of power anyway, up to about 10 times of what the CPU alone needs in a test I did with the X170KM-G to check battery life. So not very concerned with a few watt more, I would prefer that instead of having an unstable system.

 

I also doubt that the electric bill would go up by more than a few bucks per year because of that especially when it allows for a more aggressive undervolt that in turn will decrease consumption in situations with high power draw.

 

  • Thumb Up 3
Link to comment
Share on other sites

Well since disabling C-State no more crashing during game of COD MW2 at last!!!

  • Thumb Up 2

{Main System:} The Beast

Spoiler

{Cooling:} Corsair H170i Elite

{Mainboard:} Asrock X670E Pro

{CPU/GPU:} AMD Ryzen R9 7900x3D / AMD RX 7900 XTX (Asrock Phantom)

{RAM/Storage:} 2x 16GB DDR5 Corsair Vengeance 6400MT/s , 13TB WDD SN850X 2x4TB, 2x 2TB, 1x 1TB

{PSU/Case:} Corsair RM 1000x V2, Corsair 7000D Airflow (Black)

{OS:} Windows 11 Pro

 

Realtek Nahimic 3 Modded Driver for MSI Systems:Latest
 

Link to comment
Share on other sites

Very good 👍

I enabled C-State again and disabled enhanced C-states. So C-State is not complete disabled. At the moment it works fine.

btw: very interesting discusion in the xmg discord channel. Prema talks about the problems and why he stopped working on Prema Bios.
https://discord.com/channels/269128311781720064/798227835239268392

  • Thumb Up 1

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

So WoL has been working perfectly except a few times in the last few days the NIC becomes unarmed after some time in Shutdown. I realised it has happened each time I’ve tried to reinstall the LED Keyboard app that mysteriously disappeared from CC.

 

Each time I’ve tried and failed to reinstall it (says my PC isn’t supported), my shutdown PC disappears from the network after a short time in shutdown. I think it’s causing the EC to crash and power to be removed from the NIC.

 

Testing this theory now but so far it seems to be it. 

 

edit3: I'm an idiot. WoL working fine, this other app to wake the machine I was using was the problem. The usual app from my phone is waking it reliably.

Metabox Prime-X (X170KM-G) | 17.3" 165Hz G-sync | 11900KF | 32GB DDR4 3200 | RTX 3080 16GB | 1TB 980 Pro

Link to comment
Share on other sites

Well the crashing is back again even with C-States disabled.

{Main System:} The Beast

Spoiler

{Cooling:} Corsair H170i Elite

{Mainboard:} Asrock X670E Pro

{CPU/GPU:} AMD Ryzen R9 7900x3D / AMD RX 7900 XTX (Asrock Phantom)

{RAM/Storage:} 2x 16GB DDR5 Corsair Vengeance 6400MT/s , 13TB WDD SN850X 2x4TB, 2x 2TB, 1x 1TB

{PSU/Case:} Corsair RM 1000x V2, Corsair 7000D Airflow (Black)

{OS:} Windows 11 Pro

 

Realtek Nahimic 3 Modded Driver for MSI Systems:Latest
 

Link to comment
Share on other sites

38 minutes ago, solidus1983 said:

Well the crashing is back again even with C-States disabled.

Mine is still fine. Uptime at the moment 7 days and 1 hour 🥰

  • Thumb Up 1

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

I looked at idle power draw again today and dunno where I got 30-40W from. It's more like 60-70W with C-states enabled and nothing running, which is about desktop level and is 1.5x my M1 Max MacBook Pro at full tilt.

Metabox Prime-X (X170KM-G) | 17.3" 165Hz G-sync | 11900KF | 32GB DDR4 3200 | RTX 3080 16GB | 1TB 980 Pro

Link to comment
Share on other sites

On mine, idle power is ok and about 10 to 15w if i remember correctly (package TDP).

But i also reduce the power limit with Intel XTU.

Turbo boost power max: 45w
Turbo boost short power max: 65w

Its enough for >300fps in CS:GO

And when i need more power for rendering or something else, i switch the power profile.

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

15 minutes ago, crossshot said:

On mine, idle power is ok and about 10 to 15w if i remember correctly (package TDP).

But i also reduce the power limit with Intel XTU.

Turbo boost power max: 45w
Turbo boost short power max: 65w

Its enough for >300fps in CS:GO

And when i need more power for rendering or something else, i switch the power profile.


I am looking at total system power in Hwinfo which includes everything in the system. My CPU also idles at 10-15W.

Metabox Prime-X (X170KM-G) | 17.3" 165Hz G-sync | 11900KF | 32GB DDR4 3200 | RTX 3080 16GB | 1TB 980 Pro

Link to comment
Share on other sites

With your KF CPU you can't test hybrid GPU setting. Maybe that lower the all over power.

Did anybody the integrated GPU in daily use? How is the experience?

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

11 hours ago, crossshot said:

With your KF CPU you can't test hybrid GPU setting. Maybe that lower the all over power.

Did anybody the integrated GPU in daily use? How is the experience?

 

Would be interesting if somebody tested DGPU only vs iGPU vs Optimus for Office use when connected to power.

I only tested battery on iGPU and it still was rather disappointing but power savings when connected may be worth it for some.

Link to comment
Share on other sites

🥳8 days uptime for now. Longest uptime since nearly two years. C-state looks like the solution for meimage.thumb.png.c986162e192f573179c312d99c3744c4.png

  • Thumb Up 3

Clevo X170KM-G // BIOS Clevo 1.07.08 // EC 1.07.04
Intel Core i9-11900K with Thermal Grizzly Kryonaut Extreme
64GB (2x32GB) Patriot 3200Mhz DDR4
Nvidia RTX 3080 Laptop 16GB with Thermal Grizzly Kryonaut Extreme
17.3" UHD 4k 60Hz display (calibrated full AdobeRGB)
System Win11: 2TB Samsung Pro 980 NVMe SSD
System Win10: 2TB Kingston KC3000 NVMe SSD
Data: 2TB Samsung Evo 970 NVMe SSD
VMware: 1TB Samsung 980 NVMe SSD

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use