P870tm issue with clevo rtx 3080

[Maro97]

Hello everyone 

The laptop suddenly loses power while I’m playing games, as if I had unplugged the charger from the laptop while the battery is not installed. What could be causing this problem?

[Maro97]

The image changed to look like this after I installed the graphics card driver in Windows.

[Khenglish]

Your card has broken solder connections between the core and vram. It either needs to be repaired or replaced.

[Scruffy]

can be bad mxm slot ( is taht the one with vapor chamber ?)  or is this one where u put other vga like 980 mxm and so on ?

 

before conclusion tell us  if  u have more notebook or just one...

 

notebook pwoer off can be cpu overclock..... try a stable multiplyer for 4.2ghz ....

[Maro97]

52 minutes ago, Scruffy said:

can be bad mxm slot ( is taht the one with vapor chamber ?)  or is this one where u put other vga like 980 mxm and so on ?

 

before conclusion tell us  if  u have more notebook or just one...

 

notebook pwoer off can be cpu overclock..... try a stable multiplyer for 4.2ghz ....

 

 

[Maro97]

What do you guys think? Could this be a problem with something else besides the graphics card?

[Maro97]

45 minutes ago, Scruffy said:

can be bad mxm slot ( is taht the one with vapor chamber ?)  or is this one where u put other vga like 980 mxm and so on ?

 

before conclusion tell us  if  u have more notebook or just one...

 

notebook pwoer off can be cpu overclock..... try a stable multiplyer for 4.2ghz ....

I have a clevo p870tm with a modded vapour chamber heatsink with the 4 arms adapter to support rtx 3080 it’s a second gpu which i bought from the same seller on ebay the first one worked without no issues before i cracked it 

[Scruffy]

can be bad chip, but so many of them went bad ? maybe core problem....

 

try reballing it.

[Maro97]

19 minutes ago, Scruffy said:

can be bad chip, but so many of them went bad ? maybe core problem....

 

try reballing it.

 

[janepa]

2 hours ago, Maro97 said:

can be bad chip, but so many of them went bad ? maybe core problem....

 

try reballing it.

 

Hi, this might sound a little weird, but I’ve already encountered something similar a few times and when I wasn’t completely sure if reballing would help, I put the card in an electric oven for 10 minutes at 180 °C. Maybe the artifacts will disappear then. But it’s also possible that one of the memory chips is defective. The GPU core temperature might be very low, but that doesn’t mean the VRAM temperature is the same.

 

[Scruffy]

never do reflow... it only stress cpu, vram and all other component. and it's not a proper reballing.

 

send card tto someone that has the right equipment to do a proper job

 

hard part is to be able to test the vga .. if they dont have an mxm notebook to try after they do rework and reballing.

 

3080 available on ebay for like 330€.