Bought RTX 3080 Laptop GPU for my P775TM1-G.

[Kyser777]

Please can you explain and show exactly how to make the shut mode on the rtx3080 ..
-which 20mOhm shunt resistor is needed and where to buy it

-where to solder exactly

-precaution  and tips when soldering

 

BTW, can we exceed 180w on the card if we use a water-cooling system?

 

Thanks

[Maro97]

1 hour ago, Kyser777 said:

Please can you explain and show exactly how to make the shut mode on the rtx3080 ..
-which 20mOhm shunt resistor is needed and where to buy it

-where to solder exactly

-precaution  and tips when soldering

 

BTW, can we exceed 180w on the card if we use a water-cooling system?

 

Thanks

 

[Maro97]

On 11/11/2025 at 7:23 PM, Mxm said:

Welcome! Please tell me where you can find, bios for 3080 clevo p775tm1g

Thank you in advance 

 

 

[Drimacus]

Today they ship my heatsink, the seller also sent me the picture thickness of the thermal pads that i should use in my case. Can anyone confirm they correct for P775TM1 chasis, card will be RTX3080.

 

 

 

 

 

[Mxm]

All the best! Guys, tell me how to turn on the boost on 3080? Clevo p775tm, 

 

[Kastner]

On 12/16/2025 at 6:04 PM, Mxm said:

All the best! Guys, tell me how to turn on the boost on 3080? Clevo p775tm, 

 

No boost only on X170km. Only shunt mod if 150w is not enough.

[Mxm]

Many thanks! 

 

[srs2236]

On 12/16/2025 at 7:04 PM, Mxm said:

All the best! Guys, tell me how to turn on the boost on 3080? Clevo p775tm, 

 

You can have boost but only on a very old driver. It was working and i swear to god the moment I made a post here about it next driver update it was gone... 😄

 

The last working driver with boost is 528.49 and the latest driver is 591.59. So it is really old...

[zex4]

@srs2236 are you still using your p775 as main in that configuration?🤔

[srs2236]

4 hours ago, zex4 said:

@srs2236 are you still using your p775 as main in that configuration?🤔

yup, the only thing happened so far is two like dead pixel lines on my panel, from i assume all the jumping and sleeping my cat has been doing on this poor thing haha. oh and had to change keyboard like 4 times... but the last one so far is good. oh and it desperately needs new thermal paste, its very loud. the rest has been the same, all the overclocks, undervolts, ram timings.

[Mxm]

14 hours ago, srs2236 said:

Ускорение доступно, но только для очень старых драйверов. Оно работало, и, клянусь богом, в тот момент, когда я написал об этом здесь, после обновления драйвера оно исчезло... 😄

 

Последний рабочий драйвер с ускорением — 528.49, а последний драйвер — 591.59. Так что он действительно старый...

Thank you very much, you have a kind heart. 

[Drimacus]

@srs2236  Is there any chance you still have all the photos somewhere from modifications? For me most important will be  photo of the thickness of the thermal pads you used. Yesterday arrived my heatsink the build quality is average :x CPU and GPU contact surface is not acceptable i will need somehow to polish it.