clevo p870tm/tm1-g Official Clevo P870TM-G Thread

[Developer79]

On 2/5/2026 at 9:44 AM, Czaker said:

Hi, as I said, the RTX 5070Ti Ventus is on its way to you.

I believe this will accelerate your wonderful project and extend the life of the P870 for many more years!

I heartily encourage you to support the Developer79 project!

It's doing something laptop manufacturers don't want and probably never will do with laptops.

 

Best regards.

Dariusz

Hello Darius,
Thank you very much again for your help with the graphics card. It has now arrived and looks like new!!!

Now I can build it in peace and implement this card in the P870xx.

1. I'll measure the PCB for the DisplayPort channels and route the cables.
2. Design the brackets for the card.
3. Develop cooling—water or vapor chamber. Let's see what ideas I come up with.

Best regards,

Ralf

 

[Developer79]

On 2/7/2026 at 9:42 PM, MatticMass said:

What bios are you using? I used tha danske modded bios and it lists my 3080 as vga unknown so I don’t have gsync enabled

 

On 2/8/2026 at 2:57 AM, KabyZen said:

No BIOS would ever make Gsync work, that is a closely guarded NVIDIA secret.

 

On 2/8/2026 at 11:32 AM, Developer79 said:

You can only try it out and use trial and error!
To be honest, I don't really understand the need for Gsync. It's supposed to be a synchronization technology, but I think that if the graphics card, display, and CPU are good, this technology isn't really necessary. Sure, you can talk about personal preferences, but I think that's all it is!

I'm also testing G-Sync for desktop cards. I took this possibility into account when developing my MXM board. I'll get back to you on this topic.

[Developer79]

Hi,
I took apart the RTX5070Ti to measure the DisplayPort cables. On the PCB, you can clearly see how the DisplayPort channels are routed, and the manufacturers pay close attention to the routing of the channels! The chip also looks like new!
Thanks again to Darius!