Jump to content
NotebookTalk

Official Clevo p870tm-g Tread


ViktorV
 Share

Recommended Posts

Gallery of modifications Clevo p870tm

IMG_20220622_175625.jpg

IMG_20220622_160606.jpg

IMG_20220622_160555.jpg

IMG_20220607_221835.jpg

IMG_20220607_221852.jpg

IMG-20220414-WA0015.jpg

IMG-20220414-WA0016.jpg

Screenshot_2021-12-10-22-42-42-245_com.taobao.idlefish.jpg

Screenshot_2021-11-17-05-49-35-348_com.avito.android.jpg

Screenshot_2021-11-17-05-51-10-281_com.avito.android.jpg

IMG_20221005_204630.jpg

IMG_20221005_204724.jpg

IMG_20221005_224410.jpg

  • Thumb Up 2
  • Bump 1
  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

  • ViktorV changed the title to Official Clevo p870tm-g Tread

How much is a bare copper plate like the one in picture 7/8?

Please send me a PM to not break the forum rules.

 

Thank you.

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

Did the fans from picture 6 have been ever made for 5v?

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

44 minutes ago, runix18 said:

Did the fans from picture 6 have been ever made for 5v?

No

  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

5 minutes ago, ViktorV said:

No

Damn, that too bad, I could of used those.

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

Information for those who have rtx2080 Clevo cards without g-sync, the card can be made with G-sync support by rearranging the strap resistor. The procedure is as follows: 1) Solder the vbios chip from the video card, flash the vbios with a programmer that supports working with 1.8 volt chips. The card ID of non-g-sync cards is 10de 1e90, so we need a vbios with G-sync support, id 10de 1ed0. 2) We solder the strap resistor to another place (see photo). 3) We install the card in the laptop, put the radiator and everything else. We start and look at the id of the card, the id has changed to 10de 1ed0 with G-sync support.The same applies to all rtx20 Clevo cards. This was made possible thanks to an enthusiast from our Clevo forum in Russia under the nickname Chujoi13.

IMG_20221009_145723.jpg

  • Thanks 4
  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

which CPU si that?

CLEVO PT870TM1-G || i7 8700K || 32 GB 2400MHz || Nvidia GTX 1080 x 2 || 1440p @120Hz
HP ZBOOK 17 G3 || Xeon E3-1535M v5 || 16 GB 2400MHz || Nvidia Quadro GTX M5000M || 1080p @60Hz
DELL PRECISION M6400 || C2Q QX9300 || Nvidia Quadro FX3700M || 1200p @60Hz || RETIRED

LG 27UK850-W || 2160p @60Hz || AMD Freesync
OC.net profile (luisxd)

Heatware profile (luisxd)

Link to comment
Share on other sites

1 hour ago, luisxd said:

which CPU si that?

QTJ1(i9-10980hk ES)

  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

6 hours ago, ViktorV said:

QTJ1(i9-10980hk ES)

how did you make it work? is it just plug and play?

CLEVO PT870TM1-G || i7 8700K || 32 GB 2400MHz || Nvidia GTX 1080 x 2 || 1440p @120Hz
HP ZBOOK 17 G3 || Xeon E3-1535M v5 || 16 GB 2400MHz || Nvidia Quadro GTX M5000M || 1080p @60Hz
DELL PRECISION M6400 || C2Q QX9300 || Nvidia Quadro FX3700M || 1200p @60Hz || RETIRED

LG 27UK850-W || 2160p @60Hz || AMD Freesync
OC.net profile (luisxd)

Heatware profile (luisxd)

Link to comment
Share on other sites

6 hours ago, luisxd said:

how did you make it work? is it just plug and play?

The QTJ1 / QTJ0 / QTJ2 mutant processor can be bought in China, they came up with the idea of installing a bga processor on an lga1151v2 substrate and made IHS for it. In order to run these processors on Clevo p870/p775/750/751 laptops, you will need to install the latest Dsanke bios for your model, for KM and TM series it is Dsanke 9900ks 128g. For older models, you need Dsanke ME Disable bios. And another point, these processors are very picky about RAM, not all brands run. It works well with RAM sticks from SK Hynix 2133Mhz ddr4, after starting the system easily overclocks to 2666Mhz or more.

  • Thumb Up 2
  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

I'm testing Clevo p870tm bios with support for rtx 3060/3070/3080, now I don't need a modified driver)))

IMG_20221017_115610.jpg

Снимок экрана (107).png

  • Like 2
  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

55 minutes ago, ViktorV said:

I'm testing Clevo p870tm bios with support for rtx 3060/3070/3080, now I don't need a modified driver)))

IMG_20221017_115610.jpg

Снимок экрана (107).png

Is Gsync working?

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

6 minutes ago, runix18 said:

Is Gsync working?

No, but it would be very cool if it worked, although I have an ES processor, so g-sync would not start anyway.

  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

1 hour ago, ViktorV said:

No, but it would be very cool if it worked, although I have an ES processor, so g-sync would not start anyway.

To be honest I do not actually understand where does it needs that the bios needs to recognize CPU for gsync to work. I found where is the code to recognize the display but not the CPU. Maybe someone will share that with us.

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

5 minutes ago, runix18 said:

To be honest I do not actually understand where does it needs that the bios needs to recognize CPU for gsync to work. I found where is the code to recognize the display but not the CPU. Maybe someone will share that with us.

In the bios there is a list of hardware options that, when combined, g-sync will work, this is due to the Nvidia license. In addition, the Nvidia driver itself has a compatibility check for G-sync to work on your device.

  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

19 hours ago, ViktorV said:

In the bios there is a list of hardware options that, when combined, g-sync will work, this is due to the Nvidia license. In addition, the Nvidia driver itself has a compatibility check for G-sync to work on your device.

I have found the ones for the GPU and for the display but cannot find the one for the CPU

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

That's cool!

 

Do you think similar thing could be done for the P775TM1-G aswell?

 

I tried, but didn't succeed.

Clevo P775TM1-G:

Spoiler

GPU: NVIDIA GeForce RTX 3080 Laptop (150W,+105MHz Core, +203MHz Mem)

CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -100mV, 255A, 200W PL1/2)

RAM: 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v)

Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0)

Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3)

Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E)

Display 1: AU Optronics B173ZAN0.10 (4K, 60Hz)

Display 2: ROG STRIX XG17AHP (1080, 240Hz, G-Sync, DP)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo ThinkPad T540p:

Spoiler

GPU1: Intel(R) HD Graphics 4600

GPU2: NVIDIA GeForce GT 730M (+135MHz Core, +339MHz Mem)

CPU: Intel(R) Core(TM) i5-4210M

RAM: 16 GB (1600MHz, 2x8)

Storage: Samsung 860 Pro 256GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

 

Link to comment
Share on other sites

21 minutes ago, srs2236 said:

That's cool!

 

Do you think similar thing could be done for the P775TM1-G aswell?

 

I tried, but didn't succeed.

I think that this can be done for 775tm. But it does not depend on me, the bios was made by another enthusiast at my request. It all depends on his desire.

  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

I can give you a dump of the p870tm bios and if you have some skills in this area then you can disassemble it and see what changes are required to support rtx30 cards and transfer them to the p775tm bios.

  • Thanks 1
  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

Please do! Send me in DM's your BIOS if you can!

 

Will try and have a look 😃

Clevo P775TM1-G:

Spoiler

GPU: NVIDIA GeForce RTX 3080 Laptop (150W,+105MHz Core, +203MHz Mem)

CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -100mV, 255A, 200W PL1/2)

RAM: 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v)

Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0)

Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3)

Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E)

Display 1: AU Optronics B173ZAN0.10 (4K, 60Hz)

Display 2: ROG STRIX XG17AHP (1080, 240Hz, G-Sync, DP)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo ThinkPad T540p:

Spoiler

GPU1: Intel(R) HD Graphics 4600

GPU2: NVIDIA GeForce GT 730M (+135MHz Core, +339MHz Mem)

CPU: Intel(R) Core(TM) i5-4210M

RAM: 16 GB (1600MHz, 2x8)

Storage: Samsung 860 Pro 256GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

 

Link to comment
Share on other sites

Unfortunately can't get it to work at the moment...

 

I make a bunch of changes the computer works as normal but the Device ID doesn't change =(

Clevo P775TM1-G:

Spoiler

GPU: NVIDIA GeForce RTX 3080 Laptop (150W,+105MHz Core, +203MHz Mem)

CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -100mV, 255A, 200W PL1/2)

RAM: 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v)

Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0)

Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3)

Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E)

Display 1: AU Optronics B173ZAN0.10 (4K, 60Hz)

Display 2: ROG STRIX XG17AHP (1080, 240Hz, G-Sync, DP)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo ThinkPad T540p:

Spoiler

GPU1: Intel(R) HD Graphics 4600

GPU2: NVIDIA GeForce GT 730M (+135MHz Core, +339MHz Mem)

CPU: Intel(R) Core(TM) i5-4210M

RAM: 16 GB (1600MHz, 2x8)

Storage: Samsung 860 Pro 256GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

 

Link to comment
Share on other sites

21 hours ago, ViktorV said:

I can give you a dump of the p870tm bios and if you have some skills in this area then you can disassemble it and see what changes are required to support rtx30 cards and transfer them to the p775tm bios.

Hi!

 

I tried it and unfortunately it just doesn't work.

 

At this point I am convinced that to make it work on P775TM1-G there is some other workaround necessary.

 

I tried making changes to the modules for my P775 and it wouldn't change the Device-ID no matter what.

 

In the end I literally transplanted the whole nvidia driver modules (dxe, pei, smm) from your modded P870TM bios to my P775TM. Suprisingly enough, while very buggy (flickering screen, BIOS corruption, internal panel very dim) it actually works, I can boot into windows, drivers doesn't crash, HDMI output to my TV works perfectly.

 

However, the Device-ID STILL DOESN'T CHANGE!!!!!!! :@ xD

 

Pictures with the P870 driver modules in my P775:

 

20221019_104837.thumb.jpg.8058176f8f0ad3b1f552999c291d0abf.jpg

 

20221019_105144.thumb.jpg.efb38c97e0f963f6952dc7ffde3133e1.jpg

 

20221019_105334.thumb.jpg.2d0e65afe61a21d69c6d8880c6da10a3.jpg

 

So unless the modifications for the Device ID are done elsewhere in the BIOS, the same modifications that have been done to your P870 nvidia module does absolutely nothing atleast in my case for my P775 and an RTX 3080.

 

Maybe, I am missing out on something? Could you ask if its possible for that enthusiast to have a look on my P775 BIOS? I would even pay for a successful mod.

 

And if indeed there were different modules modified, another BIOS dump from you before the RTX 30 series support was added would be helpful for me.

 

Thanks!

Clevo P775TM1-G:

Spoiler

GPU: NVIDIA GeForce RTX 3080 Laptop (150W,+105MHz Core, +203MHz Mem)

CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -100mV, 255A, 200W PL1/2)

RAM: 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v)

Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0)

Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3)

Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E)

Display 1: AU Optronics B173ZAN0.10 (4K, 60Hz)

Display 2: ROG STRIX XG17AHP (1080, 240Hz, G-Sync, DP)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo ThinkPad T540p:

Spoiler

GPU1: Intel(R) HD Graphics 4600

GPU2: NVIDIA GeForce GT 730M (+135MHz Core, +339MHz Mem)

CPU: Intel(R) Core(TM) i5-4210M

RAM: 16 GB (1600MHz, 2x8)

Storage: Samsung 860 Pro 256GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

 

Link to comment
Share on other sites

19 minutes ago, srs2236 said:

Hi!

 

I tried it and unfortunately it just doesn't work.

 

At this point I am convinced that to make it work on P775TM1-G there is some other workaround necessary.

 

I tried making changes to the modules for my P775 and it wouldn't change the Device-ID no matter what.

 

In the end I literally transplanted the whole nvidia driver modules (dxe, pei, smm) from your modded P870TM bios to my P775TM. Suprisingly enough, while very buggy (flickering screen, BIOS corruption, internal panel very dim) it actually works, I can boot into windows, drivers doesn't crash, HDMI output to my TV works perfectly.

 

However, the Device-ID STILL DOESN'T CHANGE!!!!!!! :@ xD

 

Pictures with the P870 driver modules in my P775:

 

20221019_104837.thumb.jpg.8058176f8f0ad3b1f552999c291d0abf.jpg

 

20221019_105144.thumb.jpg.efb38c97e0f963f6952dc7ffde3133e1.jpg

 

20221019_105334.thumb.jpg.2d0e65afe61a21d69c6d8880c6da10a3.jpg

 

So unless the modifications for the Device ID are done elsewhere in the BIOS, the same modifications that have been done to your P870 nvidia module does absolutely nothing atleast in my case for my P775 and an RTX 3080.

 

Maybe, I am missing out on something? Could you ask if its possible for that enthusiast to have a look on my P775 BIOS? I would even pay for a successful mod.

 

And if indeed there were different modules modified, another BIOS dump from you before the RTX 30 series support was added would be helpful for me.

 

Thanks!

For the dump you can use stock P870TM bios (last version)

PC Specialist P870DM-G ALIENKILLER | i9-9900K 4.6 Ghz on all cores (-90 mv undervolted) | 32GB Hyper X Black 2666MHz | Clevo RTX 2080 3.1b undervolted for better temp 1905Mhz @881 mv | AUO B173HAN03.1 144hz Gsync | Samsung 980 NVME | 1TB SABRENT NVME | 2 TB SAMSUNG QVO SSD | Dsanke TM BIOS - Chujoi13 adapted based on needs | Network Card: Intel AX210-AX | Windows 10 Pro x64

Link to comment
Share on other sites

NVIDIA_DEV.24DC.7715.1558% = Section110, PCI\VEN_10DE&DEV_24DC&SUBSYS_77151558 

46 minutes ago, srs2236 said:

Hi!

 

I tried it and unfortunately it just doesn't work.

 

At this point I am convinced that to make it work on P775TM1-G there is some other workaround necessary.

 

I tried making changes to the modules for my P775 and it wouldn't change the Device-ID no matter what.

 

In the end I literally transplanted the whole nvidia driver modules (dxe, pei, smm) from your modded P870TM bios to my P775TM. Suprisingly enough, while very buggy (flickering screen, BIOS corruption, internal panel very dim) it actually works, I can boot into windows, drivers doesn't crash, HDMI output to my TV works perfectly.

 

However, the Device-ID STILL DOESN'T CHANGE!!!!!!! :@ xD

 

Pictures with the P870 driver modules in my P775:

 

20221019_104837.thumb.jpg.8058176f8f0ad3b1f552999c291d0abf.jpg

 

20221019_105144.thumb.jpg.efb38c97e0f963f6952dc7ffde3133e1.jpg

 

20221019_105334.thumb.jpg.2d0e65afe61a21d69c6d8880c6da10a3.jpg

 

So unless the modifications for the Device ID are done elsewhere in the BIOS, the same modifications that have been done to your P870 nvidia module does absolutely nothing atleast in my case for my P775 and an RTX 3080.

 

Maybe, I am missing out on something? Could you ask if its possible for that enthusiast to have a look on my P775 BIOS? I would even pay for a successful mod.

 

And if indeed there were different modules modified, another BIOS dump from you before the RTX 30 series support was added would be helpful for me.

 

Thanks!

NVIDIA_DEV.24DC.7715.1558% = Section110, PCI\VEN_10DE&DEV_24DC&SUBSYS_77151558    It is necessary that the identifier change to 7715 1558, as far as I remember on the old forum Dsanke said something about this

  • Sad 1
  • Сlevo p870tm1-g 17.3 Fhd 300Hz i9-10980hk ES rtx3060. / Clevo x170smg 17.3 300Hz i9-10850k rtx2070super 32g ddr4 3200Mhz Gskill. / Clevo x170kmg 17.3 2k 165Hz i5-11600k rtx3080 32g ddr4 3200Mhz Hyper-X.
Link to comment
Share on other sites

I did it!!!!

 

I am so happy!

 

A completely different module needed modifications that were untouched in your modified BIOS.

 

Not sure why the P775 and P870 work differently, but hey, glad that I got it working!

 

Huge thanks for @runix18 for telling me that it is possible and giving me a starting point and @ViktorV for showing actual proof of it working.

 

After like 10 if not more hours of bios modding and flashing finally got it working =D

  • Thumb Up 1

Clevo P775TM1-G:

Spoiler

GPU: NVIDIA GeForce RTX 3080 Laptop (150W,+105MHz Core, +203MHz Mem)

CPU: Intel(R) Core(TM) i9-9900KS (5GHz, 4GHz Cache, -100mV, 255A, 200W PL1/2)

RAM: 32 GB (3333MHz, 14-17-17-32, 2x16, Micron rev.E, 1.45v)

Storage 1: Kingston KC3000 2TB RAID0 (2x1TB, NVME, PCI-E 3.0)

Storage 2: Seagate LM015 2TB (2.5, HDD, SATA3)

Storage 3: Integral UltimaPro 512GB (SDXC, 100r/50w, PCI-E)

Display 1: AU Optronics B173ZAN0.10 (4K, 60Hz)

Display 2: ROG STRIX XG17AHP (1080, 240Hz, G-Sync, DP)

Operating system: Windows 11 Pro x64 (22H2)

Lenovo ThinkPad T540p:

Spoiler

GPU1: Intel(R) HD Graphics 4600

GPU2: NVIDIA GeForce GT 730M (+135MHz Core, +339MHz Mem)

CPU: Intel(R) Core(TM) i5-4210M

RAM: 16 GB (1600MHz, 2x8)

Storage: Samsung 860 Pro 256GB (2.5, SSD, SATA3)

Operating system: Windows 11 Pro x64 (22H2)

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use