tps3443

These new 7200 G.Skill sticks are just madness. Anyone else running these new 2x24’s? Mine have been at 8600 c38-52-52-52-139 for over a week now. Solid as a rock! I slowly worked my way up on these. First 8000 for some days, then 8200 for some days, then 8400 for some days, now 8600 and I tell you after 7 days of daily use you no BSODS, no WHEAS. Just solid as a rock!! I work on this system 8 hours a day as well. It’s really surprising to be running this. 😂 DDR5 8600 138.900 MBPS bandwidth 50.7ns latency. These are my timings below. I run these voltages. 1.350 CPU IMC 1.350 IVR TX 1.550V DDR5 VDD 1.500V DDR5 VDDQ PS: The 6.3Ghz is just (4) core loads, 6.0Ghz for all cores. I keep my water at 18.3C daily, but it does reach 24C at times during gaming. This KS is really not picky of water temps like my 13900K was. I had to maintain a SUB 18C cold temp with my 13900K for 6Ghz daily, whereas my 13900KS is like whatever…. “I like bath water” strange silicon these KS chips are! They have something special in them 🤷‍♂️🤣

Anyone try one of these liquid devil 7900XTX? They cost $1,399.99. I think it’s cool looking. https://www.microcenter.com/product/664356/powercolor-amd-radeon-rx-7900-xtx-liquid-devil-overclocked-liquid-cooled-24gb-gddr6-pcie-40-graphics-card

Testing DDR5 8600c38 with my G.Skill 7200 2x24GB sticks. Looking great so far!! Man oh man! I got a good IMC, I got a good motherboard, and I have a good ram set! This trio combo really makes it too easy. CPU IMC voltages are at 1.350v CPU IVR TX voltages are 1.350v DDR5 VDD is 1.530V DDR5 VDDQ is 1.500v I had a feeling my IMC was good because of how well the chip could drive high DDR5 8000+ speeds on just a Unify-X Z690. You can be IMC limited on either Z690 Dark, and Z690 Unify-X.

Man, I have been sick as a dog forever now. I had like COVID or the flu 🤷‍♂️. Funny because I took vacation from work, and been sick all this time, perfect timing I guess 😂. I have lost 16lbs in a week by just laying around in bed being sick!! That is insane.

That sucks. I would have just paid the extra $70. It’s definitely a great motherboard. And it would be a really fun project to swap everything over. And in the end you’d have a unicorn Z690 Apex.

Great results! How’s the Apex treating you? I think not bad for the money! It’s like only $699.99 compared to the Z790 Dark $799.99. I’m loving mine man, especially with these 2x24GB dimms. Stabilizing 8200 on air cooling was a walk in the park with only 1.350V. Passes right through Ant777 extreme. I’m not quite done yet, I’ve just been too busy this week for any serious tuning. I may be able to get 8400 on air cooling. This is hopeful thinking. But these 2x24 sticks don’t run quite as tight timings as traditional 2x16 kits, so faster speeds are much easier I think.

Playing with DDR5 8200 Air 2x24GB sticks. 1.350V VDD/VDDQ. 1.250V SA 1.350 IVR TX 1.400 IMC 8200c40 (262K tREFI) running nice N cool!

I know these are insane man. Let me tell you, if they perform anything like my 2x24GB kit I bet they are even more impressive. My 7200 kit runs exactly like the $420 dollar 8000 kit even with same voltages/timings, and they run like 33C on air in games. The feel and overclock it just totally different compared to how traditional 2x16GB sticks perform and feel. I can’t really explain it. I guess the best words would be easy and awesome lol. Having 48GB and 96GB as new upcoming standards is really cool. I wouldn’t trust buying anny 48GB/96GB kits from Corsair unless you could confirm it’s new Hynix A-Die. Corsair sells DDR5 7000 sticks that are Micron IC’s and they overclock very very poorly. These new Hynix 3rd gen IC’s are amazing whether you’re on AMD or Intel there is an option. I know if I was on AMD I’d be running those G.Skill 96 giggers 100%. I do still want to try them already as it is 😭 but they are really expensive. I guess if you look at what you’re getting it’s not that bad. Extremely fast low latency dual rank and 96GB DDR5, it’s not that bad for $470.

I’m curious how these would perform. These are 6400c32 with 1.35V and freaking 96GB. What are your thoughts, besides the $469 price tag lol. https://www.newegg.com/g-skill-96gb/p/N82E16820374464?Item=N82E16820374464&Description=96GB DDR5&cm_re=96GB_DDR5-_-20-374-464-_-Product

These new 2x24GB sticks are really interesting. 😊 I like them! Such nice low voltage.

OMG they are delicious bro lol. I went in the bios set XMP Tweaked to 7200CL38. Then before even rebooting I bumped them to the same specs as the DDR5 8000 bigger brother sticks lol. So that’s DDR5 8000 CL40-48-48-48-127 with only 1.350V and they are just marvelous (HWinfo shows 1.335V VDD/VDDQ) And running like 27C-29C with fan. They feel too easy to tune so far. 😬 I would say so far probably just grab the DDR5 7200 sticks are amazing. Especially on air cooling. They are so sweet! I originally ordered the 2x24GB 8000 set but I cancelled and grabbed the 2x24GB 7200. Because (3) different people told me they were the same lol, and it’s looking that way so far. I imagine Hynix has not shortage of these new dies lol. Or grab the 8000’s. I’m extremely happy so far though. I have a lot more dialing in to do. But DDR5 8000 with 1.35V and auto everything else? Lol. Yep! Sign me up. Yes these are the new 3rd gen Hynix from what I understand. I’m so happy with how user friendly they are and finding stability right out of the gate, then I can just tune and optimize from here. These are single rank sticks so 3x8Gbit sized module on each dimm I believe? Solid solid solid!!

New 2x24GB sticks are here. 🤩 Cool 48 gigs of ram!!

Motherboard looks really nice.

That’s extremely quick. How does that even happen? Lol.

That is just insane! Well anyone who didn’t grab one has another 3-6 months for the next batch I suppose. My taxes are 6.75% I believe. I am in North Carolina. Very rarely do I order something online from another state, and they don’t tax me lol. Some odd ball places do not though. That’s amazing. I’d say you got lucky then. Watch your CPU voltage when overclocking memory to higher levels 7800+ range. I left my 13900KS on stock clocks/auto voltages which was stable for any CPU stress test. But I couldn’t stabilize anything for my ram at all beyond 7800+. I was pulling my hair out trying to find the issue. I thought I had broke my motherboard with a FW/Bios update. Turns out, my cpu running stock with auto voltage was actually limiting my max stable memory overclock even though my CPU voltage was on auto/stock and 100% stable. My board is veryyy nice. Running like a champ now that I figured that out. I have some new Hynix 2x24GB rams that’ll be here tomorrow for it. So I overclocked cpu first then ram good to go 🤷‍♂️

Yep Asus has Z790 Apex in stock!! I bet these are same batch as mine. Only mine came straight from China to me. https://shop.asus.com/us/rog/90mb1cf0-m0aay0-rog-maximus-z790-apex.html @johnksssdid you buy one?

This place has Z790 Apex in-stock (1 left) $748 USD. https://www.grooves.land/asus-asus-rog-maximus-z790-apex-intel-lga-1700-intel-celeron-intel-core-intel-core-intel-core-intel-asus-hardware-electronic-pZZa1-2100734159.html?currency=USD&language=en&_z=us&gclid=CjwKCAjwrpOiBhBVEiwA_473dDi-3k0wgJI7t4pwTVKJ8F-_tBlK4A1piCJt4mmB1rK5BYnhIHuoXhoCJGwQAvD_BwE

Yeah the Z690 Apex boards were upsetting. I still liked it so much though, I was willing to sacrifice a little memory overclock ability just to use the motherboard. The voltage control was nice, and it ran a CPU stock extremely well. It’s impressive seeing my current Apex drive a 13900KS without power limited to 280 watts under R23 with auto/default stock voltages. @Mr. Fox could also pick up that one Z690 Apex on HWBot with no heatsinks or covers and swap all of the parts over. Both board cost(s) combined would still make it a great deal. I guess I should turn MRC back on. It trains pretty quickly with it off though. It’s not so bad. I’m tempted to grab me some really cool ram now 🤣 and a white PCB 4080 or 4090. The new 2x24GB DDR5 and 2x48GB DDR5 kits are looking good! Speaking of which if I was @electrosoft I’d be grabbing some of the new Hynix A-Die 2x48GB (6400) sets. I think that dual rank A-Die would match well with Ryzen 3D chips. The Apex Z790 is very solid though. I can definitely live happily with this motherboard. I guess I should have had one about 4 months ago. But no worries. Not much of the really cool PC stuff in the US. Right now I’m memory limited though, I have to send 1.650V VDD/VDDQ to stabilize just 8000c34 using my 7200c34 sticks.

Not really sure why EK didn’t take the more simplistic approach like the Ice man DD block. Im really curious to hear how this competes against the 12th gen super cool DD.

Glad it’s working okay. DDR5 7000 was definitely working. And it managed to get through “The Last of Us (Vanilla) 30 minute shader compile. This is seriously a tough test lol. I also ran the Aida 64 memory stress test at DDR5 7000 but not for very long. Make sure to disable both MRC fast boot, and regular fast boot. MRC fast boot is in the Dram timing page. I would apply your memory setting of 6800 reboot and hit the retrain button. My Z790 Apex was fantastic out of the box, then I go and update its FW and bios. And it took a turn for the worse, board was horrible man I actually thought I literally broke it. Disabling those 2 items and hitting retrain button fixed me right up, it was literally a magic button (I wish I would have tried this on the Z690 Apex, but I had no idea about it)

Hey everyone, I found this Patriot 2TB SSD for $77 USD. Such an amazing value! I just wanted to share. 2TB SSD= $77 1TB SSD= $43 https://store.patriotmemory.com/collections/frontpage/products/copy-of-new-patriot-p400-lite-m-2-2280-pcie-gen4-x4-solid-state-drive-1?variant=42237992861861

New version of 4090 die is shipping? Possibly better silicon? https://amp.hothardware.com/news/nvidia-releases-4090-die-with-lower-voltage

Okay. I really need a White 4090 in my life right about now. @Papusan how’s that Galax HOF 4090 treating you? Good GPU?

I pulled my Corsair 2TB Hydro M.2 off of watercooling, I just decided to use the traditional “Air” cooling and heat sink provided by the Z790 Apex motherboard. Playing BF2042 for just a few minutes on an open test bench with a fan, my M.2 was running 50C already. And it idles at 36C. I haven’t tested if it throttles. But I’m curious now. The M.2 is under the silver heatsink by the GPU and has (2) thermal pads on it. On another note, this motherboard is the best! I love the color of it. And I’ll check the M.2 speeds to see if it throttles when over 50C. I think I remember the storage controller throttling on these once in the 50’s. Which was the whole reason why I water cooled it lol.

This motherboard is SICK!!! Asus auto voltages and LLC are always tuned so WELL!!! Stock right out of the box, no adjustment at all. I run Cinebench and my 13900KS hits 287 watts max. That’s simply amazing! This is an SP104 chip.