KabyZen
-
Posts
33 -
Joined
-
Last visited
KabyZen's Achievements
-
This helps a lot! I assume that I use HxD for this right? Just need this and thunderbolt working properly.
-
So I'm preparing to put an RTX 3080 into my KM1 and I put in the RTX dsanke bios for my system (I previously had dsanke for my 8700k). After adding the bios i get this nice high-pitched noise from my headphone jack. Any way to fix? Rolling back the bios doesn't fix it. Also since I've been out of the loop what is the audio driver I should be using for the 870? EDIT: board isn’t dead, I was dremeling a stripped screw on the battery so some metal dusts must’ve caused a short. A bit of dusting and compressed air fixed that. Still figuring out how to get the audio effects to work now.
-
clevo We did it. TM1 heatsink has been grafted to KM1
KabyZen replied to KabyZen's topic in Sager & Clevo
That I still need to do. I sometimes regret not waiting for the P870TM now haha. I originally wanted to buy a TM bracket from Eurocom but they didn't have any at the time. -
clevo We did it. TM1 heatsink has been grafted to KM1
KabyZen replied to KabyZen's topic in Sager & Clevo
I just chose option 1. Used a Dremel to cut the bracket then sanded it down to required height. Threads are still there. Did end up stripping the heatsink screws a year later so popped them out and am now using regular old laptop screws (I think M2.5x5). -
State of Clevo in 2023, especially regarding durability?
KabyZen replied to yhancik's topic in Sager & Clevo
My current KM1 is going strong on 6 years. Need to find a 9th gen CPU to and a 3070 to put in it. -
Laptop black screen, fans go to max. Cpu dead or not?
KabyZen replied to KabyZen's topic in Sager & Clevo
Will do, do you know what dimensions the screws are? Have to get replacements. Or is it possible to use the KM1 screws? That way I can keep the CPU bracket the same. -
Laptop black screen, fans go to max. Cpu dead or not?
KabyZen replied to KabyZen's topic in Sager & Clevo
I should clarify that I already took off the heatsink from the board. I just want to get rid of the screws on it since I don’t want to buy another heatsink -
Laptop black screen, fans go to max. Cpu dead or not?
KabyZen replied to KabyZen's topic in Sager & Clevo
Can't see any cracks but if my 7th gen is working I guess it's the CPU. Now to find another 8th/9th gen for cheap... In other news, how do I remove the TM heatsink screws? One of them is stripped and I want to replace it. Currently using my old KM heatsink. -
Laptop black screen, fans go to max. Cpu dead or not?
KabyZen replied to KabyZen's topic in Sager & Clevo
Yes it does. I did remove a whole bunch of gunk from it (the stuff that blocks Liquid Metal from sticking) but it does heat up. -
So I’ve been running my dsanke modded p870km1 for some time now and ran into a slight problem. I have a 4.7 stable 8086k as the CPU. Recently after a BSOD computer won’t start. Reseating the cpu causes the screen to stay black on boot as well as fans ramping up to maximum after about 30 seconds. I also notice that when the fans start to spin, the power LED goes Amber and starts blinking. Currently swapped in my 7700k to keep the laptop running but I want to go back to my 6 core. So is my coffee lake dead? Tried reflashing the dsanke bios.
-
A computer that Prema would probably not have to tweak...
-
Pinch me now, this is too good to be true. After my Clevo runs its course I may get one of these. Maybe I'll forgo the 3080 upgrade. Hopefully we can choose which GPU to use in the BIOS instead of that Optimus crap.
-
But MSI is...MSI...they are sinusoidal in their performance lol.
-
Three things I need before I get another laptop. Socketed Ryzen Framework-style DGFF Unlocked BIOS Come on Clevo dont fail me now.
-
A certain DTR company needs to start taking notes. Like now. Otherwise maybe we need a Framework with Prema BIOS mods 😮. It's not exactly the same as the DGFF since Dell doesn't publish things, but an open-source standard is something that we needed since yesterday.
