Jump to content
NotebookTalk

janepa

Member
 View Profile  See their activity

  • Posts

    30

  • Joined

  • Last visited

 Content Type 

Everything posted by janepa

  1. janepa
    Please keep in mind, that mechanic and termal fit maybe it be only a first step to sucefully run 4090 on R2 and then there is a performance issue actually as i said.
  2. janepa
    I found actually some informations about edp output on 4090/4080 . If ianybody interesting about it. Maybe it could be help. MM4090B6-16G.pdf
  3. janepa
    Or maybye use another gpu manufacturer like ZRT it seems that use a stanard bracket i think. Yes, it´s only one possible option ,but assembling will be much difficult i think. Pay atention about diameter and lenght, less diameterr and longer pipe = less wattage transfer
  4. janepa
    Yes it´s true. It is strong and powerfull with minimum faults like some old car, but already it´s too old. But i am very happy for this piece of hardware.
  5. janepa
    Hi Yes, fits well on the bottom . No stick out issue, but it must use longer bolts and any kind of nuts. x-bracket ver.1.stl
  6. janepa
    Hi Yes, I had this idea a few years ago as well, but I had a problem around the hinges, there are not much of space at this area. Can you explain what your solution is?
  7. janepa
  8. janepa
    No dimensions is no problem ,yours heatsink will be fit on that gpu . It fitting perfectly in mxm slot ,but there is problem with x-bracket because there are some components like small ceramics condensators in the line for the standard x-bracket. It´s
  9. janepa
    Yeah, that's a right question. Fortunately i made water loop in my R2 because my ADLINK RTX5000 was generating some heat too much. But this gpu have even more high TDP i had to install more powerful water pump and now i have vram temp. a problem too. In one minutes i have over 100C right now, but Hot spot is around 92C and Gpu temp 84C in full throttle and ambient room temperature is 25C.
  10. janepa
    Hi, i don´t know if eDP will works in M17xR4 sorry. I don't have anything similar to test. There is it. rtx 4090 ori.rar
  11. janepa
    Sorry i don´t test it right now . There is a performance problem like a VRel. gpu voltage issue in 3D applications and other another problems as pcie lines speed as panda_zzz says in a couple months ago when testing 4060.
  12. janepa
    Yeah, i have one 4090 from x-vsion too. Have 175W TDP limit.
  13. janepa
    I did some searching and i will try for create a custom ffs file . See on video.
  14. janepa
    Yes, every TOLUD setting does absolutely nothing with the ReBarDxe.ffs file in the bios. Only in the ReBarState cmd was the resizing visible. I created a new bios with the NvStrapsReBar.ffs file and tested using the NvStrapsReBar cmd so I tried probably all combinations and the result was a bios error after reboot just no boot sequence . Only the new reflash solution so more than 40 flashings and the same result. I think there is something different between desktop and laptop motherboards. W25Q64NvStrapsReBar.rar
  15. janepa
    And I tried NvStrapsReBar and maybe that helps a little bit.
  16. janepa
    Okay, I'm back. Sorry for my late I made a new win 10 and 11 now no freezing ,but result is not what i expect. I was trying every combinations, but ReBarState say yes and GPU-Z say no.
  17. janepa
    Okay, I have new insights. After rebooting, restarted ReBarState again and this is result . Unfortunately after few seconds windows was freezing and after reboot again and in safemode too ,but i think rebar was created what i watch on sreenshot. I will try a new install of windows and see .
  18. janepa
    No, not yet, please hold on. I was testing new bios till now on my spare motherboard only with monitor nothing more. Now i will put original board and all other components and will be to continue with right proceed , but i think ,no I'm believe it shud be work . Most important thing was right inserting ffs file and this is was done by ssj92 on first shoot.
  19. janepa
    Yes, it will be great to have 2 cards, but I'm happy for this one. I watched your result with R1 a few weeks ago and I'm impressed. I kinda planning RTX5000 to R1 as you write and 4060 to R2 if it works out , because efficiency 4060 are much better and i must make new heatsink for new card too. It what will do RTX5000 with 110w will do the same job RTX4060 only with 30 wats. Anyways i was testing the new bios from you and bingo working like charm without any issues good job. Now i swap testing board and i will continue with procedure. Give me some time please. A little question. I was looking on this thread : https://github.com/terminatorul/NvStrapsReBar and maybe it will be works wih my quadro too or not ? And little present for the end. Perhaps it will be help. 1EF5 rtx5000 ori.rar
  20. janepa
    I was buing this card in year 2023 on ebay from PNY seller i think. It was new and price was really really good i cant remember how much exactly i think about 350 eur , but shipping was almost the same because the seller was not shipp to my country . It was horor because i want this card ,but shipping options was not . And this is result after years.
  21. janepa
    This is my R2 project.
  22. janepa
    Okay, I understood about this. I have ADLINK RTX5000 with 110W +5% boost peak in games about 130w and drivers installed via NVCleanstall . If do you need vbios from this gpu i can send to you no problem, but i think is completely different iron then you have.
  23. janepa
    Hi, I don't know about the rtx3080, but the rtx5000 triggers thermal throttling at 85c. I had a similar problem with heatsink and I think with any gpu-s with 120w and more will be a problem.
  24. janepa
    Okay, got it . Give me two days for test.
  25. janepa
    Hi all, at this stage it makes sense to go ahead and try for a small miracle. I have a programmer and one spare M18XR2 motherboard just for testing . I can test and test. Here's my dump. Thank you. M18XR2 A11 unlocked.rar
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Terms of Use