Reciever

Not sure how much this holds up anymore with all the different SKU's but in "simpler" times it basically boiled down to this. GTX 460 = Best value GTX 470 = Dark horse GTX 480 = King, worst value Just like how... GTX 1060 = Value GTX 1070 = Dark Horse GTX 1080 = King An oversimplification, of course.

Which is why @cylix can buy a 560Ti for 20 Euro, you're side stepping the point. If all that mattered in that context was performance, discussion would not take place in the first place. In other news I noticed a micro-stutter in the mouse of the 10850K system and couldnt get it to behave normally. Which was super odd considering AM4's issues with USB. It looks to be related to Windows though, loaded into WinPE and the problem is gone. Im guessing Windows 10 did some shenanigans while I was at work today. Completing a reset now. EDIT: Reset didnt fix it, resolved myself to a clean sweep via flash drive installation and poof the problem goes away. Sometimes its the smallest of things that annoy you the most, being perceptive sucks sometimes lol

That would actually be interesting

560Ti MSRP = 250 USD in 2011 3060Ti MSRP = 400 USD in 2023 1 USD in 2011 is about 1.32 in 2023 250 USD in 2011 is about 331 in 2023 3060Ti MSRP = 400 USD - 331 = 😞

It's a shame you are in Europe I have too much workstation-esque hardware that would be a decent fit for that platform.

From what I read the v1 boards are difficult to update to the v2 BIOS so that will save you a lot of head ache if you intend to upgrade the CPU's later

I installed the 4000mah battery into mine, gets around 16 hours of max screen brightness and "OC". I also replaced the shell with an aftermarket one off of Amazon Lent it to my coworker so he would have something to do on the plane while flying to Vietnam. When ever I'm killing time I would often play metal slug anthology :) Interested in the oled panel but not really needed until my panel fails

Can always start out by making a retro thread in the desktop subforum :)

You would figure there would be some detail or notification that it will need to be made writeable after mounting > formatting since those actions are to make the drive useable. Perhaps this is just how Gparted handles it. New users will have no idea where to find the newly formatted drive since its technically not the root of its own directory from what I can tell. This is probably where a lot of people get frustrated and give up. If I ever make any guides, that will probably be where I would start just for the people that want to see if they can play their games without having to understand the file structure.

Ran into issue already lol I formatted the 1TB drive to use it for Steam Games but I cant create the folder as its default to Read-Only. So tomorrow I get to look how to make that drive r/w, in the meantime I am installing a game on the root drive just for testing FPS in Ace Combat 7

Finally getting around to installing Linux after all these years of pushing it off. Im interested to see how the open drivers work for the 5700 XT.

I'd figure I would make a thread like this for people to give Linux a try and reach out for Linux assistance. You know it feels like the thing you are missing is just RIGHT there but have no idea what you are doing but dont want to make an account at those supposedly abrasive Linux forums to made the laughing stock. Just to be clear, me making this thread is also so I can participate, as I am an idiot. Its time to wear the badge with honor! Tonight I have installed Manjaro MATE on my AM4 system. 2700x @ 4.1 32GB DDR4 3200Mhz 256GB SSD Boot 1TB mSATA Games (hopefully) 5700XT Soon to be getting Steam running and hopefully overnight download a few titles

I was going to buy some xfire/sli bridges but I figured I should ask you guys here first, anyone in the US48 have some laying around? If so i'll make a wanted and and we can make some kind of arrangement. I still want to bench my 5970 XFIRE and GTX 690 SLI

If they don't get on top of uncertainty in the air people will start making other sites to succeed them. It happened for NBT and hwbot has many more passionate users not to mention an economy of sponsors

Simple, move to another state, work, home, sleep and repeat. My friends are mostly all in Edmonton or Alberta.

@Hiew is a big fan of it, AUR and it's quicker rolling updates were a big plus. I used it in a live session for pulling Mac addresses off of windows systems we didn't have access to. The PM in charge of the project didn't mention needing that info until right before we shipped and I didn't want to redeploy windows. I am planning to put manjaro on my AM4 system and see how that goes, I don't have any desire to move to windows 11 but also going cold turkey is equally discouraging lol

I believe you will need a gpu or it won't post since there isn't any iGPU. I think you got that part covered recently. Repairing this should be relatively cheap, workstations value drops like a rock about a year after release and this looks to be SB-E? I saw a few of these a while back in our decom, had fun messing around with it.

Members can hide their own posts iirc, but you can also report duplicate submissions and either myself or one of the moderators can take care of it :) Once it gets warmer yes for now it's warming up my bedroom. In a couple of months I'll likely give it more of a direction in terms of airflow. True enough, perhaps I should clarify. More like don't have any social obligations.

Manjaro

They are both on frames on my table :0 I wouldnt be able to just elevate, I would feel obliged to get fans or something in there lol Nice catch there! 470's had be pretty excited back in the day, still want to get my hands on those double ram capacity versions too

These are the only friends I have anymore

Consolidated my top hardware to one pc so I'm curious to how it will perform :)

Thats one way to do it, easiest method is just plugging into the iGPU with the dGPU installed in the same system. Its practically the only reason why I hold on to one optiplex 9020 or similar type of system.

MPT allows you to remove those limits I botched the vBIOS edit on one of my 5700xt's this weekend though I didnt do any research to see if it was write protected, I dont think it was but oh well its an easy fix

Just saw your post on Reddit, sorry I didnt see it earlier! I wasnt able to get multiple booleans working if that is what you are seeking. Though if all you need is to repeat the Enter key, that is simple enough with the template above. void matrix_scan_user(void){ if (spam_active) { // Check if it's been SPAM_DELAY milliseconds since the last spam if (timer_elapsed32(spam_timer) > SPAM_DELAY) { tap_code(KC_P2); // Send an F2 keystroke spam_timer = timer_read32(); // Reset spam timer } } } In the segment above, you just need to replace the "KC_P2" with the keycode for the Enter key. Keycodes can be found on the QMK Docs here but its "KC_ENT" or "KC_ENTER". bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case F2TR: // When you press custom SPAM keycode if (record->event.pressed) { spam_active = !spam_active; // Toggle spamming spam_timer = timer_read32(); // Reset spam timer } break; } return true; } In the above I gave it a custom keycode which you can see next to the case "F2TR". People advise against that sort of thing but its more of a mental placeholder for me. F2TR being shorthand for F2 Toggle Repeat. Then you place that key where you want the toggle to be in the keymap. Just for example, below is one layer in my keymap. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_SRCE] = LAYOUT( TO(1), TO(1), KC_PENT, KC_VOLU, KC_VOLD, F2TR, KC_F12, KC_P8, KC_PENT, KC_MPRV, KC_MNXT, KC_P4, KC_P5, KC_P6, KC_PENT, KC_LEFT, KC_RGHT, KC_P1, KC_P2, KC_P3, KC_PENT, KC_TRNS, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT ), F2TR is the keypress most people associate with "7" on the numpad Welcome to the Forum!