johnksss

Sorry to hear that! What is the batch number?

Yes, that's is about exactly what mine looks like. Now set the watts to max and run a port royal bench and see where you land with that.

Hummmm, my switches are still set to default and I haven't went above 1.2V with classy tool either. I had just assumed that those were set to default already to rule them out. Also check to make sure GPU is in fact running at X16 or X8 and not X4 or X1. And maybe lift the GPU out of it's socket and place it back in place. Edit: And it could be memory as well....

I would say, throw in a temp drive with fresh windows and only the nvidia driver, pe1 and port royal. and then see what it gets as a stock score. I have been doing plenty of reinstalls as of late due to unforeseen stuff happening in the background. Might have to do another reinstall as we speak. lol

Could be os related... Side note. Mine have never ever held the over clock.

Sounds like it might be time to dump the SP92. I'm not sure what I'm going to do, but I do not see me keeping two chips.

https://www.3dmark.com/3dm/74121956

That is just going to slow it down even further I'm afraid.

https://www.3dmark.com/3dm/74121541

V150J471 China

Oh, it will update that as well, just not with the right bios for it is all. RTSS? Is that what you are using to boost fps or something? This is on stock voltage as well.... So I would not just pass off the 520W vbios so easily....

No problem. Just don't try it for the 1K though.😂

Updating the 520W and 480W is easy. Just load it up and let Precision updated it for you.

Hey Ryan, No clue, but it would be running under portable AC and modded firmware though.... 😂

What do you get if you bench using the 520W vbios?

I'm on the KS at the moment.... Edit: Using auto the voltage is lower... 1.288🤦‍♂️😂

No problem, you are most welcome.

Yeah, dead man walking might need to keep on walking and leave well enough alone. LOL j/k

https://github.com/Orbmu2k/nvidiaProfileInspector/releases You need the profile inspector

What version is that? Edit: I ran it without having Rebar vbios as well.

You wouldn't need to do that. And even if you did do that, you can just turn it off in the bios. and continue to run CSM. It works with older versions as well I think...you are only changing 3 profiles in there from 0 to 1 basically which enables rebar in those profiles.

My SP97 ran that same thing as well..... So maybe we need to try using the other method with CB R23

ughhhhhhhhhhhhhhhhhhhhhhhh SP97 for the KS

You are only doing that for port royal.....